[OpenWrt-Devel] [PATCH v3 6/7] base-files: added option to configure the gpio led trigger in uci-defaults

John Crispin blogic at openwrt.org
Thu Jul 9 02:39:46 EDT 2015


Hi,

see inline

On 07/07/2015 14:58, Günther Kelleter wrote:
> Signed-off-by: Günther Kelleter <guenther.kelleter at devolo.de>
> ---
>  package/base-files/files/etc/init.d/led              |  7 +++++++
>  .../base-files/files/lib/functions/uci-defaults.sh   | 20 ++++++++++++++++++++
>  2 files changed, 27 insertions(+)
> 
> diff --git a/package/base-files/files/etc/init.d/led b/package/base-files/files/etc/init.d/led
> index 1a57e8a..3f45732 100755
> --- a/package/base-files/files/etc/init.d/led
> +++ b/package/base-files/files/etc/init.d/led
> @@ -26,6 +26,8 @@ load_led() {
>  	config_get port_state $1 port_state
>  	config_get delay $1 delay "150"
>  	config_get message $1 message ""
> +	config_get gpio $1 gpio "0"
> +	config_get inverted $1 inverted "0"
>  
>  	if [ "$trigger" = "rssi" ]; then
>  		# handled by rssileds userspace process
> @@ -80,6 +82,11 @@ load_led() {
>  			echo $delay > /sys/class/leds/${sysfs}/delay
>  			;;
>  
> +		"gpio")
> +			echo $gpio > /sys/class/leds/${sysfs}/gpio
> +			echo $inverted > /sys/class/leds/${sysfs}/inverted
> +			;;
> +
>  		switch[0-9]*)
>  			local port_mask
>  
> diff --git a/package/base-files/files/lib/functions/uci-defaults.sh b/package/base-files/files/lib/functions/uci-defaults.sh
> index 5a8809d..93997b2 100644
> --- a/package/base-files/files/lib/functions/uci-defaults.sh
> +++ b/package/base-files/files/lib/functions/uci-defaults.sh
> @@ -157,6 +157,26 @@ EOF
>  	UCIDEF_LEDS_CHANGED=1
>  }
>  
> +ucidef_set_led_gpio() {

the name is a bit misleading. could you change it to
ucidef_set_led_trigger_gpio or similar ?

	John


> +	local cfg="led_$1"
> +	local name=$2
> +	local sysfs=$3
> +	local gpio=$4
> +	local inverted=$5
> +
> +	uci -q get system.$cfg && return 0
> +
> +	uci batch <<EOF
> +set system.$cfg='led'
> +set system.$cfg.name='$name'
> +set system.$cfg.sysfs='$sysfs'
> +set system.$cfg.trigger='gpio'
> +set system.$cfg.gpio='$gpio'
> +set system.$cfg.inverted='$inverted'
> +EOF
> +	UCIDEF_LEDS_CHANGED=1
> +}
> +
>  ucidef_set_rssimon() {
>  	local dev="$1"
>  	local refresh="$2"
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list