[OpenWrt-Devel] [PATCH 0/3] at91: fixes for 3.18 kernel update

[John Crispin]

On 19/02/2015 03:29, Owen Kirby wrote:
> The following are some fixes from testing the v3.18 update to the
> at91 target. In particular, I found that the drivers for the
> poweroff and reset controllers were missing (they were built
> implicitly in 3.14), which would cause the router to hang when
> trying to reboot.
> 
> The AT91 USB gadget driver was broken from changes in clock
> registration in 3.18, so I have backported a patch to the at91_udc
> driver posted to the linux-arm-kernel mailing list a few months
> ago.
> 
> This was tested on an AT91SAM9G20-EK and an Exegin Q5x board.

Nice, i also built a few patches last night to get some of the iio
stuff built, add some uci-defaults, sysupgrade, ....

i'll hopefully get those ready during the day.

> 
> Owen Kirby (3):


> at91: Enable power and reset controller drivers. at91: USB gadget
> subsystem cleanup and driver fix. at91: Add dts for Exegin Q5x
> boards.
> 
> target/linux/at91/Makefile                         |   4 +- 
> target/linux/at91/config-default                   |  16 +- 
> .../at91/files/arch/arm/boot/dts/at91-q5xr5.dts    | 193
> +++++++++++++++++++++ target/linux/at91/image/Makefile
> |   4 + target/linux/at91/modules.mk                       |  18
> ++ .../100-ARM-at91-build-dtb-for-LMU5000.patch       |   2 +- 
> .../patches/101-ARM-at91-build-dtb-for-q5xr5.patch |  10 ++ 
> .../200-ARM-at91-udc-clockfix-backport.patch       |  82 +++++++++ 
> 8 files changed, 318 insertions(+), 11 deletions(-) create mode
> 100644 target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts 
> create mode 100644
> target/linux/at91/patches/101-ARM-at91-build-dtb-for-q5xr5.patch 
> create mode 100644
> target/linux/at91/patches/200-ARM-at91-udc-clockfix-backport.patch
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel