[OpenWrt-Devel] Request for testing mtdsplit_uimage

[John Crispin]

On 12/02/2015 08:55, Rafał Miłecki wrote:
> As you could notice I've improved mtdsplit_uimage a bit:
> https://dev.openwrt.org/changeset/44412/
> https://dev.openwrt.org/changeset/44413/
> https://dev.openwrt.org/changeset/44414/
> https://dev.openwrt.org/changeset/44415/
> 
> This should add support for Edimax devices, but... could also break something.
> 
> Please try it and let me know if anything went wrong for you.
> 


Hi,

[    0.596000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
[    0.600000] 4 ofpart partitions found on MTD device spi32766.0
[    0.604000] Creating 4 MTD partitions on "spi32766.0":
[    0.612000] 0x000000000000-0x000000010000 : "uboot"
[    0.616000] 0x000000010000-0x000000020000 : "uboot-env"
[    0.624000] 0x000000020000-0x000000030000 : "calibration"
[    0.628000] 0x000000050000-0x000000ff0000 : "firmware"
[    0.640000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.644000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.652000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.656000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.664000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.672000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.676000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.684000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.692000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.696000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.704000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.712000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.716000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.724000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.732000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.736000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.744000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.752000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.756000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.764000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.772000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.776000] mtdsplit_uimage: Buffer too small for checking Edimax header
[    0.784000] mtdsplit_uimage: Buffer too small for checking Edimax header



and about 200 more lines of same error. i can test a patch that fixes
the issue if you send it to me. unit boots successfully after the msg flood.

	John
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel