[OpenWrt-Devel] [PATCH 2/7] image: move netgear-image to top and rename to -dni

Jonas Gorski jogo at openwrt.org
Fri Aug 21 07:45:16 EDT 2015


Use the same naming as netgear-chk.

Signed-off-by: Jonas Gorski <jogo at openwrt.org>
---
 include/image.mk                   |  9 +++++++++
 target/linux/ar71xx/image/Makefile | 13 ++-----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/include/image.mk b/include/image.mk
index 261cbb2..d4ebdef 100644
--- a/include/image.mk
+++ b/include/image.mk
@@ -308,6 +308,15 @@ define Build/netgear-chk
 	mv $@.new $@
 endef
 
+define Build/netgear-dni
+	$(STAGING_DIR_HOST)/bin/mkdniimg \
+		-B $(NETGEAR_BOARD_ID) -v OpenWrt.$(REVISION) \
+		$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
+		-r "$(1)" \
+		-i $@ -o $@.new
+	mv $@.new $@
+endef
+
 define Build/fit
 	$(TOPDIR)/scripts/mkits.sh \
 		-D $(DEVICE_NAME) -o $@.its -k $@ \
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 04597f2..e6fe36a 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -37,15 +37,6 @@ define Build/netgear-uImage
 	$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
 endef
 
-define Build/netgear-image
-	$(STAGING_DIR_HOST)/bin/mkdniimg \
-		-B $(NETGEAR_BOARD_ID) -v OpenWrt.$(REVISION) \
-		$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-		-r "$(1)" \
-		-i $@ -o $@.new
-	mv $@.new $@
-endef
-
 # combine kernel and rootfs into one image
 # -a align the rootfs start on an <align> bytes boundary
 # -j add jffs2 end-of-filesystem markers
@@ -198,8 +189,8 @@ define Device/wndr3700
   KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
   IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
   IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.img = $$(IMAGE/default) | netgear-image | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-image NA | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
 endef
 
 define Device/wndr3700v2
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list