[OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)

[John kerry]

Hi,

I have to keep 2 default settings for wireless, i means to say i have to
configure default settings for 2.4GHz and 5GHz.

How i can configure wireless files. mainly i will add switch button in the
GUI to switch over 2.4GHz and 5GHz.

How i can control this in backend, how i can add file which handle this and
configure 2 separate default settings for 2.4GHz and 5GHz.

Thanks,

On Fri, Aug 7, 2015 at 1:50 PM, David Lang <david at lang.hm> wrote:

> You cannot use both radios on the same channel, or even the same band.
>
> One radio will only work on channels 1-11 and the other will only work on
> channels 36+
>
> pick which band you are going to use to connect to the remote AP and which
> you are going to use to have your clients connect to it.
>
> David Lang
>
>
> On Fri, 7 Aug 2015, John kerry wrote:
>
> Hi,
>>
>>
>> I have one and i configured as below:
>>
>> config wifi-device 'wifi0'
>>        option type 'qcawifi'
>>        option channel 'auto'
>>        option macaddr '00:26:75:bd:37:24'
>>        option hwmode '11ng'
>>        option txpower '16'
>>        option htmode 'HT20'
>>
>> config wifi-iface
>>        option device 'wifi0'
>>        option network 'lan'
>>        option mode 'ap'
>>        option ssid 'Test_Ap'
>>        option encryption 'psk2'
>>        option key 'Test_AP'
>>
>>
>> We can configure one radio only to work like that.
>> Something like below:
>>
>> config wifi-device 'radio0'
>>
>>>                 option type 'mac80211'
>>>>                 option channel '11'
>>>>                 option hwmode '11g'
>>>>                 option path 'platform/ar933x_wmac'
>>>>                 option htmode 'HT20'
>>>>                 option country 'US'
>>>>                 option txpower '20'
>>>>
>>>>         config wifi-iface 'ap1'
>>>>                 option device 'radio0'
>>>>                 option mode 'ap'
>>>>                 option wds '1'
>>>>                 option ssid 'my AP'
>>>>                 option network 'lan'
>>>>
>>>>         config wifi-iface 'mesh1'
>>>>                 option device 'radio0'
>>>>                 option mode 'mesh'
>>>>                 option mesh_id 'my mesh'
>>>>                 option network 'lan'
>>>>
>>>
>>
>>
>> On Fri, Aug 7, 2015 at 11:31 AM, Weedy <weedy2887 at gmail.com> wrote:
>>
>> On 6 Aug 2015 23:15, "John kerry" <kerry9842 at gmail.com> wrote:
>>>
>>>>
>>>> Hi,
>>>>
>>>>
>>>> Could anyone please help me on this to configure the wireless in such a
>>>>
>>> way that when we connect to wireless WAN the LAN SSID should not change.
>>>
>>>>
>>>>
>>>> Thanks,
>>>>
>>>
>>> You need 2 physical radios.
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150808/7c07be93/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel