[OpenWrt-Devel] [PATCH 3/3] ipq806x: enable NAND flash support in the kernel

Mathieu Olivari mathieu at codeaurora.org
Thu Aug 6 22:28:42 EDT 2015 

Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.

There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:

root at OpenWrt:/# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "qcom-nandc"
...

Signed-off-by: Mathieu Olivari <mathieu at codeaurora.org>
---
 target/linux/ipq806x/Makefile    |  2 +-
 target/linux/ipq806x/config-3.18 | 21 ++++++++++++++++++++-
 target/linux/ipq806x/config-4.1  | 19 ++++++++++++++++++-
 3 files changed, 39 insertions(+), 3 deletions(-)

diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile
index b6ddfe2..45f83dd 100644
--- a/target/linux/ipq806x/Makefile
+++ b/target/linux/ipq806x/Makefile
@@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk
 ARCH:=arm
 BOARD:=ipq806x
 BOARDNAME:=Qualcomm Atheros IPQ806X
-FEATURES:=squashfs
+FEATURES:=squashfs nand ubifs
 CPU_TYPE:=cortex-a7
 MAINTAINER:=John Crispin <blogic at openwrt.org>
 
diff --git a/target/linux/ipq806x/config-3.18 b/target/linux/ipq806x/config-3.18
index feedfd9..2a837f5 100644
--- a/target/linux/ipq806x/config-3.18
+++ b/target/linux/ipq806x/config-3.18
@@ -104,6 +104,8 @@ CONFIG_CRC16=y
 # CONFIG_CRC32_SARWATE is not set
 CONFIG_CRC32_SLICEBY8=y
 CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_SHA1_ARM_NEON is not set
 # CONFIG_CRYPTO_SHA512_ARM_NEON is not set
 CONFIG_CRYPTO_XZ=y
@@ -251,10 +253,21 @@ CONFIG_MSM_IOMMU=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
@@ -327,7 +340,7 @@ CONFIG_PREEMPT_RCU=y
 CONFIG_PRINTK_TIME=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PTP_1588_CLOCK=y
-# CONFIG_QCOM_ADM is not set
+CONFIG_QCOM_ADM=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
@@ -395,6 +408,11 @@ CONFIG_THERMAL_OF=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_STATS=y
 CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_UEVENT_HELPER_PATH=""
 CONFIG_UID16=y
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
@@ -416,5 +434,6 @@ CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ipq806x/config-4.1 b/target/linux/ipq806x/config-4.1
index 0262e7a..f711dd5 100644
--- a/target/linux/ipq806x/config-4.1
+++ b/target/linux/ipq806x/config-4.1
@@ -111,6 +111,8 @@ CONFIG_CRC16=y
 # CONFIG_CRC32_SARWATE is not set
 CONFIG_CRC32_SLICEBY8=y
 CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_XZ=y
 CONFIG_DCACHE_WORD_ACCESS=y
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -263,9 +265,18 @@ CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
@@ -341,7 +352,7 @@ CONFIG_PREEMPT_RCU=y
 CONFIG_PRINTK_TIME=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PTP_1588_CLOCK=y
-# CONFIG_QCOM_ADM is not set
+CONFIG_QCOM_ADM=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
@@ -406,6 +417,11 @@ CONFIG_THERMAL_OF=y
 # CONFIG_THUMB2_KERNEL is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_STATS=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_UEVENT_HELPER_PATH=""
 CONFIG_UID16=y
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
@@ -427,5 +443,6 @@ CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZONE_DMA_FLAG=0
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

More information about the openwrt-devel mailing list