[OpenWrt-Devel] [OpenWrt] #15267: Netgear WNR2200: USB powered off (missing gpio pins)

[John Crispin]

Hi,

please submit your patch as described in the howto

	John

On 19/09/2014 07:55, 郭涛 wrote:
> Hi,
> 
> Please apply my patch
> 
> BR
> 
> 2014年9月19日 下午1:40于 "OpenWrt" <openwrt-devel at lists.openwrt.org
> <mailto:openwrt-devel at lists.openwrt.org>>写道：
> 
>     #15267: Netgear WNR2200: USB powered off (missing gpio pins)
>     ---------------------------+----------------------------------
>       Reporter:  sinnerotuh@…  |      Owner:  developers
>           Type:  defect        |     Status:  new
>       Priority:  normal        |  Milestone:  Chaos Calmer (trunk)
>      Component:  kernel        |    Version:  Trunk
>     Resolution:                |   Keywords:
>     ---------------------------+----------------------------------
> 
>     Comment (by david@…):
> 
>      Hi,
> 
>      Is there any progress on this? I have the same router (WNR2200) and USB
>      does not seem to work. At least there are no sd* devices and /dev/
>     and I
>      guess there is no power supplied to USB port. Using Barrier Breaker
>      14.07-rc3.
> 
>      I am not an expert but feel free to ask, if that helps to solve this
>      issue.
> 
>      I have installed the following relevant packages: block-mount, kmod-fs-
>      ext4, kmod-fs-ntfs, kmod-scsi-core, kmod-scsi-generic, kmod-usb-core,
>      kmod-usb-storage, kmod-usb2, samba36-server.
> 
>      # dmesg | grep usb
>      [    6.330000] usbcore: registered new interface driver usbfs
>      [    6.340000] usbcore: registered new interface driver hub
>      [    6.340000] usbcore: registered new device driver usb
>      [   12.660000] usbcore: registered new interface driver usb-storage
> 
>      # dmesg | grep hci
>      [    6.360000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>     Driver
>      [    6.360000] ehci-platform: EHCI generic platform driver
>      [    6.370000] ehci-platform ehci-platform: EHCI Host Controller
>      [    6.370000] ehci-platform ehci-platform: new USB bus registered,
>      assigned bus number 1
>      [    6.380000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
>      [    6.410000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
>      [    6.420000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> 
>      Cheers,
> 
>      David
> 
>     --
>     Ticket URL: <https://dev.openwrt.org/ticket/15267#comment:8>
>     OpenWrt <http://openwrt.org>
>     Opensource Wireless Router Technology
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel