[OpenWrt-Devel] [PATCH]ramips:support Lenovo AC1200 Wireless router

John Crispin john at phrozen.org
Mon Jul 28 12:44:48 EDT 2014


Hi,

where is the DTS file ?

	John

On 24/07/2014 16:04, Lintel Huang wrote:
> 
> Today, Lenovo released a new product,an 11ac wireless router base
> MTK's mt7620a + mt7612e evaluation board. It has Two GE
> ports(RTL8211E) and 4 FE ports(Internal switch),256MByte DDR2,
> 3xUSB 2.0. This patch will make openwrt support it.
> 
> Sorry for my pool english,tks at all.
> 
> Regards, Lintel
> 
> Signed-off-by:Lintel<lintel.huang at gmail.com
> <mailto:lintel.huang at gmail.com>>
> 
> diff --git a/target/linux/ramips/base-files/etc/diag.sh 
> b/target/linux/ramips/base-files/etc/diag.sh index 908547e..edebed8
> 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++
> b/target/linux/ramips/base-files/etc/diag.sh @@ -182,6 +182,9 @@
> get_status_led() { na930) status_led="na930:blue:power" ;; +
> ac1200) +        status_led="lenovo:blue:power" +        ;; esac }
> 
> diff --git
> a/target/linux/ramips/base-files/etc/uci-defaults/02_network 
> b/target/linux/ramips/base-files/etc/uci-defaults/02_network index
> b372893..b862d9c 100755 ---
> a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++
> b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@
> -172,6 +172,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan
> "switch0" "2" "4 6t" ;;
> 
> +    ac1200) +        ucidef_set_interfaces_lan_wan "eth0.1"
> "eth0.2" +        ucidef_add_switch "switch0" "1" "1" +
> ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5 6t" +
> ucidef_add_switch_vlan "switch0" "2" "0 6t" +        ;; d105 | \ 
> na930 | \ omni-emb-hpm|\ @@ -254,7 +260,8 @@ ramips_setup_macs() 
> wan_mac=$(macaddr_add "$lan_mac" 1) ;;
> 
> -    wr8305rt) +    wr8305rt | \ +    ac1200) 
> lan_mac=$(mtd_get_mac_binary factory 4) wan_mac=$(macaddr_add
> "$lan_mac" 1) ;; diff --git
> a/target/linux/ramips/base-files/lib/ramips.sh 
> b/target/linux/ramips/base-files/lib/ramips.sh index
> f9ab1e3..9a339b1 100755 ---
> a/target/linux/ramips/base-files/lib/ramips.sh +++
> b/target/linux/ramips/base-files/lib/ramips.sh @@ -313,6 +313,9 @@
> ramips_board_detect() { *"ZBT WR8305RT") name="wr8305rt" ;; +
> *"Lenovo AC1200") +        name="ac1200" +        ;; *) 
> name="generic" ;; diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh 
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh index
> 8ada58b..a5a63ae 100755 ---
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -93,7
> +93,8 @@ platform_check_image() { wrtnode |\ x5 |\ x8 |\ -
> zbt-wa05) +    zbt-wa05 |\ +    ac1200) [ "$magic" != "27051956" ]
> && { echo "Invalid image type." return 1 diff --git
> a/target/linux/ramips/image/Makefile 
> b/target/linux/ramips/image/Makefile index ef019ef..79e1787 100644 
> --- a/target/linux/ramips/image/Makefile +++
> b/target/linux/ramips/image/Makefile @@ -716,6 +716,7 @@
> Image/Build/Profile/DIR-810L=$(call 
> BuildFirmware/CustomFlash/$(1),$(1),dir-810l 
> na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call 
> BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) 
> Image/Build/Profile/MZK-750DHP=$(call 
> BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) 
> +Image/Build/Profile/AC1200=$(call 
> BuildFirmware/Default16M/$(1),$(1),ac1200,AC1200)
> 
> ifeq ($(SUBTARGET),mt7620a) define Image/Build/Profile/Default @@
> -730,6 +731,7 @@ define Image/Build/Profile/Default $(call
> Image/Build/Profile/WHR1166D,$(1)) $(call
> Image/Build/Profile/MZK-750DHP,$(1)) $(call
> Image/Build/Profile/NA930,$(1)) +    $(call
> Image/Build/Profile/AC1200,$(1)) endef endif
> 
> diff --git a/target/linux/ramips/mt7620a/config-3.10 
> b/target/linux/ramips/mt7620a/config-3.10 index 6805dd9..50e0a55
> 100644 --- a/target/linux/ramips/mt7620a/config-3.10 +++
> b/target/linux/ramips/mt7620a/config-3.10 @@ -1,6 +1,7 @@ 
> CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y 
> CONFIG_ARCH_DISCARD_MEMBLOCK=y 
> CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y 
> +CONFIG_ARCH_HAS_RESET_CONTROLLER=y 
> CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y 
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@
> -78,6 +79,7 @@ CONFIG_HAVE_PERF_EVENTS=y CONFIG_HW_HAS_PCI=y 
> CONFIG_HW_RANDOM=m CONFIG_HZ_PERIODIC=y +CONFIG_ICPLUS_PHY=y 
> CONFIG_IMAGE_CMDLINE_HACK=y CONFIG_INET_LRO=y 
> CONFIG_INITRAMFS_SOURCE="" @@ -88,6 +90,7 @@
> CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_INTC=y CONFIG_IRQ_WORK=y 
> CONFIG_M25PXX_USE_FAST_READ=y +CONFIG_MARVELL_PHY=y 
> CONFIG_MDIO_BOARDINFO=y # CONFIG_MII is not set CONFIG_MIPS=y @@
> -138,7 +141,9 @@ CONFIG_PINMUX=y CONFIG_RALINK=y 
> CONFIG_RALINK_USBPHY=y CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y #
> CONFIG_RCU_STALL_COMMON is not set +CONFIG_REALTEK_PHY=y 
> CONFIG_RESET_CONTROLLER=y # CONFIG_SAMSUNG_USB2PHY is not set #
> CONFIG_SAMSUNG_USB3PHY is not set
> 
> 
> 
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list