[OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default

[John Crispin]

sure, i also just figured out why the rc1 lantiq images dont have dsl
enabled by default. i will pusah a fix to trunk tonight once i tested
it properly

	John

On 21/07/2014 10:29, Ben Mulvihill wrote:
> If you would that would be great. It is not essential, but that way
> all the necessary downloads would be in one place on the official
> openwrt site.
> 
> Thank you,
> 
> Ben
> 
> On Sun, 2014-07-20 at 11:12 +0200, John Crispin wrote:
>> i can build a ramdisk for the board for the reelase if it is
>> needed to install. we do the same for the mikrotik boards.
>> 
>> John
>> 
>> On 20/07/2014 10:03, Ben Mulvihill wrote:
>>> No problem. I'll try to make sure there is a link to a
>>> non-official ramdisk image on the wiki. (Along with some
>>> installation instructions, which at the moment are lacking!)
>>> 
>>> Ben
>>> 
>>> On Sun, 2014-07-20 at 08:54 +0200, John Crispin wrote:
>>>> technically correct. however there is a dependency bug left
>>>> over from some cargo cult cleanups. this causes the image
>>>> builder to not build when ramdisk is enabled. i plan to clean
>>>> this up post BB. i will ignore this patch until said time.
>>>> 
>>>> John
>>>> 
>>>> On 19/07/2014 15:13, Ben Mulvihill wrote:
>>>>> The installation process on nand-based boards using ubi
>>>>> like the BTHOMEHUBV2B makes use of a ramdisk image, so it
>>>>> makes sense to generate this by default.
>>>>> 
>>>>> Signed-off-by: Ben Mulvihill <ben.mulvihill at gmail.com> ---
>>>>> --- a/target/linux/lantiq/xway/target.mk	2014-07-19 
>>>>> 14:59:39.691201637 +0200 +++ 
>>>>> b/target/linux/lantiq/xway/target.mk	2014-07-19 
>>>>> 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips 
>>>>> SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm
>>>>> mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs
>>>>> ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp
>>>>> 
>>>>> _______________________________________________
>>>>> openwrt-devel mailing list openwrt-devel at lists.openwrt.org
>>>>>  
>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>
>>>>
>>>>>
>>
>>>>> 
_______________________________________________
>>>> openwrt-devel mailing list openwrt-devel at lists.openwrt.org 
>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>>> 
_______________________________________________ openwrt-devel
>>> mailing list openwrt-devel at lists.openwrt.org 
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>
>>> 
_______________________________________________
>> openwrt-devel mailing list openwrt-devel at lists.openwrt.org 
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel