[OpenWrt-Devel] [PATCH - for comment only] lantiq: use UbinizeImage instead lantiq-specific ubinize.cfg files

[John Crispin]

On 02/07/2014 08:33, Ben Mulvihill wrote:
> On Tue, 2014-07-01 at 22:17 +0200, John Crispin wrote:
>> 
>> On 01/07/2014 22:12, Ben Mulvihill wrote:
>>> Hello again,
>>> 
>>> I have just tried sysupgradeNAND on the BTHOMEHUBV2B, and it
>>> fails with the following error:
>>> 
>>> 
>>> cat: can't open '/tmp/sysinfo/board_name': No such file or 
>>> directory Unlocking kernel ...
>>> 
>>> Writing from <stdin> to kernel ...  [ ]tar:
>>> sysupgrade-/kernel: not found in archive
>>> 
>>> 
>>> Procd relies on /tmp/sysinfo/board_name being present, but I
>>> don't have a /tmp/sysinfo directory at all. Should I have? If
>>> so, should I add code to lib/functions/lantiq.sh to generate 
>>> /tmp/sysinfo/board_name using lantiq_board_id() ? And if so,
>>> what do I hook it to to make sure it gets executed?
>>> 
>>> Thanks,
>>> 
>>> Ben
>>> 
>>> 
>> 
>> ermm yes ... it should work the same as on imx6, ramips, ar71xx
>> ...
>> 
>> you can either do this tonight or i can do it in the morning.
>> which ever you prefer :)
>> 
> Just did a quick test and the mechanism seems simple enough. But 
> I'm afraid my day job and other commitments will keep me busy now
> until the weekend. I guess it depends whether you feel like taking
> time from the 101 other things you are working on simultaneously
> ;-) I'll send the UbinizeImage patch anyway now, with an extra line
> to generate the SysupgradeNAND tar files.
> 
> One unfortunate thing: lantiq has lantiq_board_id and 
> lantiq_board_name, whereas the other architectures all have 
> xxxxx_board_name and xxxxx_model, and for sysupgrade to work
> /temp/sysinfo/board_name will have to contain the value of
> lantiq_board_id, not, as would seem logical, lantiq_board_name.
> Confusing!
> 
> 
> 

YES ! :)

i already have staged patches locally that unify this pattern over all
targets and add a /lib/board.sh with a unified api naming etc. i am
just holding it back til BB is done. scared to break stuff in the last
days of the release :)

i'll fix up lantiq so your problem is gone during the day

	John


> 
> _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel