[OpenWrt-Devel] [PATCH] ramips: set default vid of each vlan, so it won't need be set explicitly.

[Roman Yeryomin]

On 1 July 2014 13:57, John Crispin <john at phrozen.org> wrote:
> Great,
>
> Roman can you test / confirm that this fixes the problem on rt-n14 ? i
> don't have that unit myself so i cannot test.

Yes, it fixes the default configuration.
But I still don't understand why I cannot change neither vid not member ports:

root at OpenWrt:/# swconfig dev switch0 vlan 1 show
VLAN 1:
        vid: 1
        ports: 1 2 3 4 6t
root at OpenWrt:/# swconfig dev switch0 vlan 1 set ports '3 4 6t'
root at OpenWrt:/# swconfig dev switch0 vlan 1 show
VLAN 1:
        vid: 1
        ports: 1 2 3 4 6t

So is it broken or what?
Although I didn't check earlier versions it seems broken to me...


Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel