[OpenWrt-Devel] au1000 - 3.14 tested needed

[Bruno Randolf]

Hi Bastian,

Sorry for the delay.

On 12/08/2014 08:01 PM, Bastian Bittorf wrote:
> what is strange: the ethernet-mac is always changing
> after each reboot. not sure if this was also the case
> with 3.10 - bruno can you see this too?

Yes, I can confirm this.
I just checked: The same happens on 14.07 with kernel 3.10.49 so we
haven't noticed this problem since a while...

> what is also strange: 'yamonenv' is installed, but simply
> does not work. i never used it before, so i'am not sure
> if it was ever working...

yanmonenv works over here (tested on 14.07 and trunk):

root at OpenWrt:/# yamonenv -a
memsize="0x04000000"
prompt="YAMON"
start="go 0xbfd00000 root=/dev/mtdblock/0"
modetty0="115200,n,8,1,none"
modetty1="115200,n,8,1,none"
bootserport="tty0"
ethaddr="00.0e.56.00.00.f7"
ipaddr="192.168.1.1"
subnetmask="255.255.255.0"
gateway="0.0.0.0"
bootprot="tftp"
bootserver="192.168.1.9"
bootfile="vmlinux-mtx.srec"
MAC="0"
cubeID="247"
tftp="load /vmlinux.srec; go . root=/dev/mtdblock/0"
flash="go 0xbfd00000 root=/dev/mtdblock/0"
startwaittime="30"
load=""
lo="load /vmlinux.srec"

Greetings,
bruno
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel