[OpenWrt-Devel] [PATCH][ar71xx] Add support for BHU Networks BXO2000n-2S/BXO5000n-2S/BXI2000n-2/BXO2000n-2S-U
John Crispin
blogic at openwrt.org
Wed Dec 10 01:50:18 EST 2014
Hi,
now all the tabs are gone and there are only spaces. however this time i
think it was your email client, that broke the patch. you should try
using "git send-email"
John
On 10/12/2014 07:09, yangbo wrote:
> Hi,
> Thank you for reply.
> I have changed the patch, using tab instead of leading space .
> For there are different boards support in one file, I think it's better to put #define
> for different boards with the board support functions.
>
>
> Signed-off-by: Terry Yang <yangbo at bhunetworks.com>
>
> Index: target/linux/ar71xx/base-files/etc/diag.sh
> ===================================================================
> --- target/linux/ar71xx/base-files/etc/diag.sh (revision 43488)
> +++ target/linux/ar71xx/base-files/etc/diag.sh (working copy)
> @@ -37,7 +37,7 @@
> bullet-m | rocket-m | nano-m | nanostation-m | nanostation-m-xw | loco-m-xw)
> status_led="ubnt:green:link4"
> ;;
> - bxu2000n-2-a1)
> + bxu2000n-2-a1 | bxo2000n-2s-u | bxo2000n-2s | bxi2000n-2 | bxo5000n-2s)
> status_led="bhu:green:status"
> ;;
> cap4200ag)
> Index: target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> ===================================================================
> --- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (revision 43488)
> +++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (working copy)
> @@ -46,10 +46,21 @@
> ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13"
> ;;
>
> -bxu2000n-2-a1)
> +bxu2000n-2-a1|\
> +bxi2000n-2)
> ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt"
> ;;
>
> +bxo2000n-2s-u|\
> +bxo2000n-2s|\
> +bxo5000n-2s)
> + ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt"
> + ucidef_set_rssimon "wlan0" "40000" "1"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "bhu:green:rssilow" "wlan0" "1" "40" "0" "6"
> + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "bhu:green:rssimedium" "wlan0" "30" "80" "-29" "5"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "bhu:green:rssihigh" "wlan0" "70" "100" "-69" "8"
> + ;;
> +
> cap4200ag)
> ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
> ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
> Index: target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> ===================================================================
> --- target/linux/ar71xx/base-files/etc/uci-defaults/02_network (revision 43488)
> +++ target/linux/ar71xx/base-files/etc/uci-defaults/02_network (working copy)
> @@ -332,7 +332,8 @@
> ucidef_set_interface_lan "eth0"
> ;;
>
> -dir-505-a1)
> +dir-505-a1 |\
> +bxi2000n-2)
> ucidef_set_interface_lan "eth1"
> ;;
>
> Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
> ===================================================================
> --- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 43488)
> +++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
> @@ -810,6 +810,18 @@
> *"BHU BXU2000n-2 rev. A1")
> name="bxu2000n-2-a1"
> ;;
> + *"BHU BXO2000n-2S")
> + name="bxo2000n-2s"
> + ;;
> + *"BHU BXO2000n-2S-U")
> + name="bxo2000n-2s-u"
> + ;;
> + *"BHU BXI2000n-2")
> + name="bxi2000n-2"
> + ;;
> + *"BHU BXO5000n-2S")
> + name="bxo5000n-2s"
> + ;;
> *"HiWiFi HC6361")
> name="hiwifi-hc6361"
> ;;
> Index: target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> ===================================================================
> --- target/linux/ar71xx/base-files/lib/upgrade/platform.sh (revision 43488)
> +++ target/linux/ar71xx/base-files/lib/upgrade/platform.sh (working copy)
> @@ -183,6 +183,10 @@
> db120 | \
> hornet-ub | \
> bxu2000n-2-a1 | \
> + bxo2000n-2s | \
> + bxo2000n-2s-u | \
> + bxi2000n-2 | \
> + bxo5000n-2s | \
> zcn-1523h-2 | \
> zcn-1523h-5)
> [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && {
> Index: target/linux/ar71xx/config-3.14
> ===================================================================
> --- target/linux/ar71xx/config-3.14 (revision 43488)
> +++ target/linux/ar71xx/config-3.14 (working copy)
> @@ -37,7 +37,7 @@
> CONFIG_ATH79_MACH_AP96=y
> CONFIG_ATH79_MACH_ARCHER_C7=y
> CONFIG_ATH79_MACH_AW_NR580=y
> -CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
> +CONFIG_ATH79_MACH_BHU_ATH=y
> CONFIG_ATH79_MACH_CAP4200AG=y
> CONFIG_ATH79_MACH_CARAMBOLA2=y
> CONFIG_ATH79_MACH_CPE510=y
> Index: target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-ath.c
> ===================================================================
> --- target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-ath.c (revision 0)
> +++ target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-ath.c (working copy)
> @@ -0,0 +1,370 @@
> +/*
> + * BHU board support
> + *
> + * Copyright (C) 2013-2014 Terry Yang <yangbo at bhunetworks.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +static const char *bhu_ap123_part_probes[] = {
> + "cmdlinepart",
> + NULL,
> +};
> +
> +static struct flash_platform_data bhu_ap123_flash_data = {
> + .part_probes = bhu_ap123_part_probes,
> +};
> +
> +static void __init bhu_ap123_setup(u8 *mac, u8 *ee)
> +{
> +
> + ath79_register_m25p80(&bhu_ap123_flash_data);
> +
> + ath79_register_mdio(1, 0x0);
> +
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
> +
> + /* GMAC0 is connected to the PHY4 of the internal switch */
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_switch_data.phy_poll_mask = BIT(4);
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.phy_mask = BIT(4);
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
> + ath79_register_eth(0);
> +
> + /* GMAC1 is connected to the internal switch. Only use PHY3 */
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> + ath79_eth1_data.phy_mask = BIT(3);
> + ath79_register_eth(1);
> +
> + ath79_register_wmac(ee, ee+2);
> +
> + ath79_register_usb();
> +}
> +
> +/*
> + * BHU BXU2000n-2 A1 board
> + */
> +
> +#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13
> +#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19
> +#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21
> +#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14
> +
> +#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17
> +
> +#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \
> + (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)
> +
> +static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
> + {
> + .name = "bhu:green:status",
> + .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:lan",
> + .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wan",
> + .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wlan",
> + .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN,
> + .active_low = 1,
> + },
> +};
> +
> +static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +static void __init bhu_bxu2000n2_a1_setup(void)
> +{
> + bhu_ap123_setup((u8 *) KSEG1ADDR(0x1fff0000), (u8 *) KSEG1ADDR(0x1fff1000));
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
> + bhu_bxu2000n2_a1_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
> + bhu_bxu2000n2_a1_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
> + "BHU BXU2000n-2 rev. A1",
> + bhu_bxu2000n2_a1_setup);
> +
> +/*
> + * BHU BXO2000n-2S board
> + */
> +
> +#define BHU_BXO2000N2S_GPIO_LED_SYSTEM 14
> +#define BHU_BXO2000N2S_GPIO_LED_S0 14
> +#define BHU_BXO2000N2S_GPIO_LED_S1 19
> +#define BHU_BXO2000N2S_GPIO_LED_S2 15
> +#define BHU_BXO2000N2S_GPIO_LED_S3 21
> +#define BHU_BXO2000N2S_GPIO_LED_WLAN 13
> +#define BHU_BXO2000N2S_GPIO_LED_WAN 20
> +#define BHU_BXO2000N2S_GPIO_LED_LAN 22
> +
> +#define BHU_BXO2000N2S_GPIO_BTN_RESET 17
> +
> +#define BHU_BXO2000N2S_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define BHU_BXO2000N2S_KEYS_DEBOUNCE_INTERVAL \
> + (3 * BHU_BXO2000N2S_KEYS_POLL_INTERVAL)
> +
> +static struct gpio_led bhu_bxo2000n2s_leds_gpio[] __initdata = {
> + {
> + .name = "bhu:green:status",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:lan",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_LAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wan",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_WAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wlan",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_WLAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssilow",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_S1,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssimedium",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_S2,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssihigh",
> + .gpio = BHU_BXO2000N2S_GPIO_LED_S3,
> + .active_low = 1,
> + },
> +};
> +
> +static struct gpio_keys_button bhu_bxo2000n2s_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = BHU_BXO2000N2S_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = BHU_BXO2000N2S_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +static void __init bhu_bxo2000n2s_setup(void)
> +{
> + bhu_ap123_setup((u8 *) KSEG1ADDR(0x1f7f0000), (u8 *) KSEG1ADDR(0x1f7f1000));
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxo2000n2s_leds_gpio),
> + bhu_bxo2000n2s_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, BHU_BXO2000N2S_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(bhu_bxo2000n2s_gpio_keys),
> + bhu_bxo2000n2s_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_BHU_BXO2000N2S, "BXO2000n-2S",
> + "BHU BXO2000n-2S",
> + bhu_bxo2000n2s_setup);
> +
> +
> +/*
> + * BHU BXO2000n-2S-U board
> + */
> +
> +static void __init bhu_bxo2000n2s_u_setup(void)
> +{
> + bhu_ap123_setup((u8 *) KSEG1ADDR(0x1fff0000), (u8 *) KSEG1ADDR(0x1fff1000));
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxo2000n2s_leds_gpio),
> + bhu_bxo2000n2s_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, BHU_BXO2000N2S_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(bhu_bxo2000n2s_gpio_keys),
> + bhu_bxo2000n2s_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_BHU_BXO2000N2SU, "BXO2000n-2S-U",
> + "BHU BXO2000n-2S-U",
> + bhu_bxo2000n2s_u_setup);
> +
> +/*
> + * BHU BXI2000n-2 board
> + */
> +
> +#define BHU_BXI2000N2_GPIO_LED_WLAN 13
> +#define BHU_BXI2000N2_GPIO_LED_LAN 14
> +#define BHU_BXI2000N2_GPIO_LED_SYSTEM 15
> +#define BHU_BXI2000N2_GPIO_LED_RES 19
> +#define BHU_BXI2000N2_GPIO_LED_5G 21
> +
> +#define BHU_BXI2000N2_GPIO_BTN_RESET 17
> +
> +#define BHU_BXI2000N2_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define BHU_BXI2000N2_KEYS_DEBOUNCE_INTERVAL \
> + (3 * BHU_BXI2000N2_KEYS_POLL_INTERVAL)
> +
> +static struct gpio_led bhu_bxi2000n2_leds_gpio[] __initdata = {
> + {
> + .name = "bhu:green:status",
> + .gpio = BHU_BXI2000N2_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:lan",
> + .gpio = BHU_BXI2000N2_GPIO_LED_LAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wlan",
> + .gpio = BHU_BXI2000N2_GPIO_LED_WLAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:res",
> + .gpio = BHU_BXI2000N2_GPIO_LED_RES,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:5g",
> + .gpio = BHU_BXI2000N2_GPIO_LED_5G,
> + .active_low = 1,
> + },
> +};
> +
> +static struct gpio_keys_button bhu_bxi2000n2_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = BHU_BXI2000N2_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = BHU_BXI2000N2_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +static void __init bhu_bxi2000n2_setup(void)
> +{
> + bhu_ap123_setup((u8 *) KSEG1ADDR(0x1f7f0000), (u8 *) KSEG1ADDR(0x1f7f1000));
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxi2000n2_leds_gpio),
> + bhu_bxi2000n2_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, BHU_BXI2000N2_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(bhu_bxi2000n2_gpio_keys),
> + bhu_bxi2000n2_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_BHU_BXI2000N2, "BXI2000n-2",
> + "BHU BXI2000n-2",
> + bhu_bxi2000n2_setup);
> +
> +
> +/*
> + * BHU BXO5000n-2S board
> + */
> +
> +#define BHU_BXO5000N2S_GPIO_LED_SYSTEM 19
> +#define BHU_BXO5000N2S_GPIO_LED_S0 19
> +#define BHU_BXO5000N2S_GPIO_LED_S1 20
> +#define BHU_BXO5000N2S_GPIO_LED_S2 21
> +#define BHU_BXO5000N2S_GPIO_LED_S3 15
> +#define BHU_BXO5000N2S_GPIO_LED_WLAN 12
> +#define BHU_BXO5000N2S_GPIO_LED_WAN 18
> +#define BHU_BXO5000N2S_GPIO_LED_LAN 22
> +
> +#define BHU_BXO5000N2S_GPIO_BTN_RESET 17
> +
> +#define BHU_BXO5000N2S_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define BHU_BXO5000N2S_KEYS_DEBOUNCE_INTERVAL \
> + (3 * BHU_BXO5000N2S_KEYS_POLL_INTERVAL)
> +
> +static struct gpio_led bhu_bxo5000n2s_leds_gpio[] __initdata = {
> + {
> + .name = "bhu:green:status",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:lan",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_LAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wan",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_WAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:wlan",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_WLAN,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssilow",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_S1,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssimedium",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_S2,
> + .active_low = 1,
> + }, {
> + .name = "bhu:green:rssihigh",
> + .gpio = BHU_BXO5000N2S_GPIO_LED_S3,
> + .active_low = 1,
> + },
> +};
> +
> +static struct gpio_keys_button bhu_bxo5000n2s_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = BHU_BXO5000N2S_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = BHU_BXO5000N2S_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +
> +static void __init bhu_bxo5000n2s_setup(void)
> +{
> + bhu_ap123_setup((u8 *) KSEG1ADDR(0x1f7f0000), (u8 *) KSEG1ADDR(0x1f7f1000));
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxo5000n2s_leds_gpio),
> + bhu_bxo5000n2s_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, BHU_BXO5000N2S_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(bhu_bxo5000n2s_gpio_keys),
> + bhu_bxo5000n2s_gpio_keys);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_BHU_BXO5000N2S, "BXO5000n-2S",
> + "BHU BXO5000n-2S",
> + bhu_bxo5000n2s_setup);
> +
> Index: target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
> ===================================================================
> --- target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c (revision 43488)
> +++ target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c (working copy)
> @@ -1,120 +0,0 @@
> -/*
> - * BHU BXU2000n-2 A1 board support
> - *
> - * Copyright (C) 2013 Terry Yang <yangbo at bhunetworks.com>
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published
> - * by the Free Software Foundation.
> - */
> -
> -#include <linux/gpio.h>
> -#include <linux/platform_device.h>
> -
> -#include <asm/mach-ath79/ath79.h>
> -#include <asm/mach-ath79/ar71xx_regs.h>
> -
> -#include "common.h"
> -#include "dev-eth.h"
> -#include "dev-gpio-buttons.h"
> -#include "dev-leds-gpio.h"
> -#include "dev-m25p80.h"
> -#include "dev-usb.h"
> -#include "dev-wmac.h"
> -#include "machtypes.h"
> -
> -#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13
> -#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19
> -#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21
> -#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14
> -
> -#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17
> -
> -#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */
> -#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \
> - (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)
> -
> -static const char *bhu_bxu2000n2_part_probes[] = {
> - "cmdlinepart",
> - NULL,
> -};
> -
> -static struct flash_platform_data bhu_bxu2000n2_flash_data = {
> - .part_probes = bhu_bxu2000n2_part_probes,
> -};
> -
> -static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
> - {
> - .name = "bhu:green:status",
> - .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
> - .active_low = 1,
> - }, {
> - .name = "bhu:green:lan",
> - .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN,
> - .active_low = 1,
> - }, {
> - .name = "bhu:green:wan",
> - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN,
> - .active_low = 1,
> - }, {
> - .name = "bhu:green:wlan",
> - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN,
> - .active_low = 1,
> - },
> -};
> -
> -static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
> - {
> - .desc = "Reset button",
> - .type = EV_KEY,
> - .code = KEY_RESTART,
> - .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
> - .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET,
> - .active_low = 1,
> - }
> -};
> -
> -static void __init bhu_ap123_setup(void)
> -{
> - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
> - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
> -
> - ath79_register_m25p80(&bhu_bxu2000n2_flash_data);
> -
> - ath79_register_mdio(1, 0x0);
> -
> - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
> - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
> -
> - /* GMAC0 is connected to the PHY4 of the internal switch */
> - ath79_switch_data.phy4_mii_en = 1;
> - ath79_switch_data.phy_poll_mask = BIT(4);
> - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> - ath79_eth0_data.phy_mask = BIT(4);
> - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
> - ath79_register_eth(0);
> -
> - /* GMAC1 is connected to the internal switch. Only use PHY3 */
> - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> - ath79_eth1_data.phy_mask = BIT(3);
> - ath79_register_eth(1);
> -
> - ath79_register_wmac(ee, ee+2);
> -}
> -
> -static void __init bhu_bxu2000n2_a1_setup(void)
> -{
> - bhu_ap123_setup();
> -
> - ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
> - bhu_bxu2000n2_a1_leds_gpio);
> -
> - ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
> - ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
> - bhu_bxu2000n2_a1_gpio_keys);
> -}
> -
> -MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
> - "BHU BXU2000n-2 rev. A1",
> - bhu_bxu2000n2_a1_setup);
> -
> Index: target/linux/ar71xx/generic/profiles/bhu.mk
> ===================================================================
> --- target/linux/ar71xx/generic/profiles/bhu.mk (revision 43488)
> +++ target/linux/ar71xx/generic/profiles/bhu.mk (working copy)
> @@ -15,3 +15,47 @@
> endef
>
> $(eval $(call Profile,BXU2000N2))
> +
> +define Profile/BXO2000N2S
> + NAME:=BHU BXO2000n-2s
> + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-storage
> +endef
> +
> +define Profile/BXO2000N2S/Description
> + Package set optimized for the BHU BXO2000n-2s.
> +endef
> +
> +$(eval $(call Profile,BXO2000N2S))
> +
> +define Profile/BXO2000N2SU
> + NAME:=BHU BXO2000n-2s-u
> + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-storage
> +endef
> +
> +define Profile/BXO2000N2SU/Description
> + Package set optimized for the BHU BXO2000n-2s-u.
> +endef
> +
> +$(eval $(call Profile,BXO2000N2SU))
> +
> +define Profile/BXI2000N2
> + NAME:=BHU BXI2000n-2
> + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-storage
> +endef
> +
> +define Profile/BXI2000N2/Description
> + Package set optimized for the BHU BXI2000n-2.
> +endef
> +
> +$(eval $(call Profile,BXI2000N2))
> +
> +define Profile/BXO5000N2S
> + NAME:=BHU BXO5000n-2s
> + PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-storage
> +endef
> +
> +define Profile/BXO5000N2S/Description
> + Package set optimized for the BHU BXO2000n-2s.
> +endef
> +
> +$(eval $(call Profile,BXO5000N2S))
> Index: target/linux/ar71xx/image/Makefile
> ===================================================================
> --- target/linux/ar71xx/image/Makefile (revision 43488)
> +++ target/linux/ar71xx/image/Makefile (working copy)
> @@ -267,7 +267,11 @@
> ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k at 0x50000(firmware)
> ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
> ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k at 0x50000(firmware)
> -bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
> +bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro,9856k at 0x50000(firmware)
> +bxo2000n2su_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),1408k(kernel),12416k(rootfs),2048k(user),64k(cfg),64k(oem),64k(art)ro,13824k at 0x50000(firmware)
> +bxo2000n2s_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6400k(rootfs),1280k(kernel),64k(cfg),64k(oem),64k(art)ro,7680k at 0x50000(firmware)
> +bxi2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6400k(rootfs),1280k(kernel),64k(cfg),64k(oem),64k(art)ro,7680k at 0x50000(firmware)
> +bxo5000n2s_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6400k(rootfs),1280k(kernel),64k(cfg),64k(oem),64k(art)ro,7680k at 0x50000(firmware)
> cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
> cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
> cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
> @@ -1136,7 +1140,11 @@
> $(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
> $(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
> $(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
> -$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
> +$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),KRuImage))
> +$(eval $(call SingleProfile,AthLzma,64k,BXO2000N2SU,bxo2000n-2s-u,BXU2000n-2-U,ttyS0,115200,$$(bxo2000n2su_mtdlayout),KRuImage))
> +$(eval $(call SingleProfile,AthLzma,64k,BXO2000N2S,bxo2000n-2s,BXO2000n-2S,ttyS0,115200,$$(bxo2000n2s_mtdlayout),RKuImage))
> +$(eval $(call SingleProfile,AthLzma,64k,BXI2000N2,bxi2000n-2,BXI2000n-2,ttyS0,115200,$$(bxi2000n2_mtdlayout),RKuImage))
> +$(eval $(call SingleProfile,AthLzma,64k,BXO5000N2S,bxo5000n-2s,BXO5000n-2S,ttyS0,115200,$$(bxo5000n2s_mtdlayout),RKuImage))
> $(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
> $(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
> $(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
> Index: target/linux/ar71xx/patches-3.14/734-MIPS-ath79-BHU-BXO2000n2s.patch
> ===================================================================
> --- target/linux/ar71xx/patches-3.14/734-MIPS-ath79-BHU-BXO2000n2s.patch (revision 0)
> +++ target/linux/ar71xx/patches-3.14/734-MIPS-ath79-BHU-BXO2000n2s.patch (working copy)
> @@ -0,0 +1,37 @@
> +--- a/arch/mips/ath79/Kconfig
> ++++ b/arch/mips/ath79/Kconfig
> +@@ -1095,8 +1095,8 @@ config ATH79_MACH_CARAMBOLA2
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> +-config ATH79_MACH_BHU_BXU2000N2_A
> +- bool "BHU BXU2000n-2 rev. A support"
> ++config ATH79_MACH_BHU_ATH
> ++ bool "BHU atheros board support"
> + select SOC_AR934X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> +--- a/arch/mips/ath79/Makefile
> ++++ b/arch/mips/ath79/Makefile
> +@@ -51,7 +51,7 @@ obj-$(CONFIG_ATH79_MACH_AP83) += mach-a
> + obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
> + obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
> + obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
> +-obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
> ++obj-$(CONFIG_ATH79_MACH_BHU_ATH) += mach-bhu-ath.o
> + obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
> + obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
> + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
> +--- a/arch/mips/ath79/machtypes.h
> ++++ b/arch/mips/ath79/machtypes.h
> +@@ -35,6 +35,10 @@ enum ath79_mach_type {
> + ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
> + ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
> + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
> ++ ATH79_MACH_BHU_BXO2000N2S, /* BHU BXO2000n-2s */
> ++ ATH79_MACH_BHU_BXO2000N2SU, /* BHU BXO2000n-2s-u */
> ++ ATH79_MACH_BHU_BXI2000N2, /* BHU BXI2000n-2 */
> ++ ATH79_MACH_BHU_BXO5000N2S, /* BHU BXO5000n-2s */
> + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
> + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
> + ATH79_MACH_CPE510, /* TP-LINK CPE510 */
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list