[PATCH v7 1/3] lib: sbi: Add RISC-V vector context save/restore support
Anup Patel
anup at brainfault.org
Mon May 18 01:25:51 PDT 2026
On Mon, May 18, 2026 at 11:12 AM <dave.patel at riscstar.com> wrote:
>
> From: Dave Patel <dave.patel at riscstar.com>
>
> Eager context switch: Add support for saving and restoring RISC-V vector
> extension state in OpenSBI. This introduces a per-hart vector context
> structure and helper routines to perform full context save and restore.
>
> The vector context includes vcsr CSRs along with storage for all 32 vector
> registers. The register state is saved and restored using byte-wise vector
> load/store instructions (vs8r/vl8r).
>
> The implementation follows an eager context switching model where the entire
> vector state is saved and restored on every context switch. This provides a
> simple and deterministic mechanism without requiring lazy trap-based
> management.
>
> Signed-off-by: Dave Patel <dave.patel at riscstar.com>
> ---
> include/sbi/sbi_vector.h | 28 ++++++++++
> lib/sbi/objects.mk | 1 +
> lib/sbi/sbi_vector.c | 118 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 147 insertions(+)
> create mode 100644 include/sbi/sbi_vector.h
> create mode 100644 lib/sbi/sbi_vector.c
>
> diff --git a/include/sbi/sbi_vector.h b/include/sbi/sbi_vector.h
> new file mode 100644
> index 00000000..d92fc03d
> --- /dev/null
> +++ b/include/sbi/sbi_vector.h
> @@ -0,0 +1,28 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2026 RISCstar Solutions.
> + *
> + * Authors:
> + * Dave Patel <dave.patel at riscstar.com>
> + */
> +
> +#ifndef __SBI_VECTOR_H__
> +#define __SBI_VECTOR_H__
> +
> +#include <sbi/sbi_types.h>
> +
> +struct sbi_vector_context {
> + unsigned long vcsr;
> + unsigned long vstart;
> +
> + /* size depends on VLEN */
> + uint8_t vregs[];
> +};
> +
> +void sbi_vector_save(struct sbi_vector_context *dst);
> +void sbi_vector_restore(const struct sbi_vector_context *src);
> +size_t sbi_vector_context_size(void);
> +
> +#endif //__SBI_VECTOR_H__
> +
I had commented on previous series that this newline
is redundant but I still see it here.
> diff --git a/lib/sbi/objects.mk b/lib/sbi/objects.mk
> index 97cc4521..ddb2e7ac 100644
> --- a/lib/sbi/objects.mk
> +++ b/lib/sbi/objects.mk
> @@ -109,3 +109,4 @@ libsbi-objs-y += sbi_trap_v_ldst.o
> libsbi-objs-y += sbi_unpriv.o
> libsbi-objs-y += sbi_expected_trap.o
> libsbi-objs-y += sbi_cppc.o
> +libsbi-objs-y += sbi_vector.o
> diff --git a/lib/sbi/sbi_vector.c b/lib/sbi/sbi_vector.c
> new file mode 100644
> index 00000000..e4a1f515
> --- /dev/null
> +++ b/lib/sbi/sbi_vector.c
> @@ -0,0 +1,118 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2026 RISCstar Solutions.
> + *
> + * Authors:
> + * Dave Patel <dave.patel at riscstar.com>
> + */
> +
> +#include <sbi/sbi_domain.h>
> +#include <sbi/riscv_encoding.h>
> +#include <sbi/riscv_asm.h>
> +#include <sbi/sbi_vector.h>
> +#include <sbi/sbi_types.h>
> +#include <sbi/sbi_hart.h>
> +#include <sbi/sbi_error.h>
> +#include <sbi/sbi_console.h>
> +
> +#ifdef OPENSBI_CC_SUPPORT_VECTOR
> +
> +size_t sbi_vector_context_size(void)
> +{
> + return sizeof(struct sbi_vector_context) + (32 * csr_read(CSR_VLENB));
> +}
> +
> +void sbi_vector_save(struct sbi_vector_context *dst)
> +{
> + unsigned long mstatus_orig;
> +
> + if (!dst)
> + return;
> +
> + /* Step 1. Save original mstatus and Enable VS */
> + mstatus_orig = csr_read_set(CSR_MSTATUS, MSTATUS_VS);
> +
> + /* Step 2: Save CSRs */
> + dst->vcsr = csr_read(vcsr);
> + dst->vstart = csr_read(vstart);
> +
> + ulong vlenb = csr_read(CSR_VLENB);
> + uint8_t *base = dst->vregs;
> +
> + /* Step 3: Save vector registers */
> +#define SAVE_VREG(i) \
> + ({ \
> + asm volatile( \
> + " .option push\n\t" \
> + " .option arch, +v\n\t" \
> + " vs8r.v v" #i ", (%0)\n\t" \
> + " .option pop\n\t" \
> + :: "r"(base + (i) * vlenb) : "memory"); \
> + }) \
> +
> + SAVE_VREG(0);
> + SAVE_VREG(8);
> + SAVE_VREG(16);
> + SAVE_VREG(24);
> +
> +#undef SAVE_VREG
> +
> + /* Step 4. Restore original mstatus LAST */
> + csr_write(CSR_MSTATUS, mstatus_orig);
> +}
> +
> +void sbi_vector_restore(const struct sbi_vector_context *src)
> +{
> + unsigned long mstatus_orig;
> +
> + if (!src)
> + return;
> +
> + /* Step 1. Save original mstatus and Enable VS */
> + mstatus_orig = csr_read_set(CSR_MSTATUS, MSTATUS_VS);
> +
> + const uint8_t *base = src->vregs;
> + ulong vlenb = csr_read(CSR_VLENB);
> +
> + /* Step 2: Restore vector registers */
> +#define RESTORE_VREG(i) \
> + ({ \
> + asm volatile( \
> + " .option push\n\t" \
> + " .option arch, +v\n\t" \
> + " vl8r.v v" #i ", (%0)\n\t" \
> + " .option pop\n\t" \
> + :: "r"(base + (i) * vlenb) : "memory"); \
> + }) \
> +
> + RESTORE_VREG(0);
> + RESTORE_VREG(8);
> + RESTORE_VREG(16);
> + RESTORE_VREG(24);
> +#undef RESTORE_VREG
> +
> + /* Step 3: Restore CSR's last */
> + /* Restore CSRs first */
> + csr_write(vcsr, src->vcsr);
> + csr_write(vstart, src->vstart);
> +
> + /* Step 4. Restore original mstatus LAST */
> + csr_write(CSR_MSTATUS, mstatus_orig);
> +}
> +
> +#else
> +
> +void sbi_vector_save(struct sbi_vector_context *dst)
> +{
> +}
> +
> +void sbi_vector_restore(const struct sbi_vector_context *src)
> +{
> +}
> +
> +size_t sbi_vector_context_size(void)
> +{
> + return 0;
Use tabs for alignment instead of spaces.
> +}
> +#endif /* OPENSBI_CC_SUPPORT_VECTOR */
> --
> 2.43.0
>
>
> --
> opensbi mailing list
> opensbi at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/opensbi
Regards,
Anup
More information about the opensbi
mailing list