[PATCH v3] Check that hartid is within the SBI_HARTMASK_MAX_BITS
Xiang W
wxjstz at 126.com
Wed Jan 29 01:07:39 PST 2025
在 2025-01-28二的 13:33 -0800,Raj Vishwanathan写道:
> It is possible that hartid may not be sequential and it should not be validated
> against SBI_HARTMASK_MAX_BITS. Instead we should check the index of the hartid, hart index, against SBI_HARTMASK_MAX_BITS.
>
> Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan at gmail.com>
LGTM
Reviewed-by: Xiang W <wxjstz at 126.com>
> --
> Changes in V2:
> Update: Make hart_count > SBI_HARTMASK_MAX_BITS a catastrophic failure.
>
> Changes in V1:
> Ignore if hart_count is more than SBI_HARTMASK_MAX_BITS.
> ---
> lib/utils/fdt/fdt_domain.c | 2 +-
> lib/utils/fdt/fdt_helper.c | 6 +++---
> platform/generic/platform.c | 4 ++--
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/lib/utils/fdt/fdt_domain.c b/lib/utils/fdt/fdt_domain.c
> index 4bc7ed8..7d10d10 100644
> --- a/lib/utils/fdt/fdt_domain.c
> +++ b/lib/utils/fdt/fdt_domain.c
> @@ -471,7 +471,7 @@ static int __fdt_parse_domain(const void *fdt, int domain_offset, void *opaque)
> if (err)
> continue;
>
> - if (SBI_HARTMASK_MAX_BITS <= val32)
> + if (SBI_HARTMASK_MAX_BITS <= sbi_hartid_to_hartindex(val32))
> continue;
>
> if (!fdt_node_is_enabled(fdt, cpu_offset))
> diff --git a/lib/utils/fdt/fdt_helper.c b/lib/utils/fdt/fdt_helper.c
> index cb350e5..4673921 100644
> --- a/lib/utils/fdt/fdt_helper.c
> +++ b/lib/utils/fdt/fdt_helper.c
> @@ -1032,7 +1032,7 @@ int fdt_parse_aclint_node(const void *fdt, int nodeoffset,
> if (rc)
> continue;
>
> - if (SBI_HARTMASK_MAX_BITS <= hartid)
> + if (SBI_HARTMASK_MAX_BITS <= sbi_hartid_to_hartindex(hartid))
> continue;
>
> if (match_hwirq == hwirq) {
> @@ -1097,7 +1097,7 @@ int fdt_parse_plmt_node(const void *fdt, int nodeoffset, unsigned long *plmt_bas
> if (rc)
> continue;
>
> - if (SBI_HARTMASK_MAX_BITS <= hartid)
> + if (SBI_HARTMASK_MAX_BITS <= sbi_hartid_to_hartindex(hartid))
> continue;
>
> if (hwirq == IRQ_M_TIMER)
> @@ -1153,7 +1153,7 @@ int fdt_parse_plicsw_node(const void *fdt, int nodeoffset, unsigned long *plicsw
> if (rc)
> continue;
>
> - if (SBI_HARTMASK_MAX_BITS <= hartid)
> + if (SBI_HARTMASK_MAX_BITS <= sbi_hartid_to_hartindex(hartid))
> continue;
>
> if (hwirq == IRQ_M_SOFT)
> diff --git a/platform/generic/platform.c b/platform/generic/platform.c
> index c03ed88..027ec89 100644
> --- a/platform/generic/platform.c
> +++ b/platform/generic/platform.c
> @@ -200,8 +200,8 @@ unsigned long fw_platform_init(unsigned long arg0, unsigned long arg1,
> if (rc)
> continue;
>
> - if (SBI_HARTMASK_MAX_BITS <= hartid)
> - continue;
> + if (SBI_HARTMASK_MAX_BITS <= hart_count)
> + break;
>
> if (!fdt_node_is_enabled(fdt, cpu_offset))
> continue;
> --
> 2.43.0
>
>
More information about the opensbi
mailing list