[PATCH 1/6] platform: Setup serial console device in early_init()
Anup Patel
apatel at ventanamicro.com
Fri Jul 5 00:14:59 PDT 2024
The sbi_console_init() does not do any special initialization so
setup serial console device in early_init() so that console prints
work as early as possible.
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
platform/fpga/ariane/platform.c | 26 +++++++++-----------------
platform/fpga/openpiton/platform.c | 20 ++++----------------
platform/generic/platform.c | 21 +++++++++++----------
platform/kendryte/k210/platform.c | 18 ++++++------------
platform/nuclei/ux600/platform.c | 18 +++++++-----------
platform/template/platform.c | 18 ++++++------------
6 files changed, 43 insertions(+), 78 deletions(-)
diff --git a/platform/fpga/ariane/platform.c b/platform/fpga/ariane/platform.c
index 8be5e6c..8d46d88 100644
--- a/platform/fpga/ariane/platform.c
+++ b/platform/fpga/ariane/platform.c
@@ -7,7 +7,6 @@
#include <sbi/riscv_asm.h>
#include <sbi/riscv_encoding.h>
#include <sbi/riscv_io.h>
-#include <sbi/sbi_console.h>
#include <sbi/sbi_const.h>
#include <sbi/sbi_hart.h>
#include <sbi/sbi_platform.h>
@@ -67,8 +66,15 @@ static struct aclint_mtimer_data mtimer = {
*/
static int ariane_early_init(bool cold_boot)
{
- /* For now nothing to do. */
- return 0;
+ if (!cold_boot)
+ return 0;
+
+ return uart8250_init(ARIANE_UART_ADDR,
+ ARIANE_UART_FREQ,
+ ARIANE_UART_BAUDRATE,
+ ARIANE_UART_REG_SHIFT,
+ ARIANE_UART_REG_WIDTH,
+ ARIANE_UART_REG_OFFSET);
}
/*
@@ -87,19 +93,6 @@ static int ariane_final_init(bool cold_boot)
return 0;
}
-/*
- * Initialize the ariane console.
- */
-static int ariane_console_init(void)
-{
- return uart8250_init(ARIANE_UART_ADDR,
- ARIANE_UART_FREQ,
- ARIANE_UART_BAUDRATE,
- ARIANE_UART_REG_SHIFT,
- ARIANE_UART_REG_WIDTH,
- ARIANE_UART_REG_OFFSET);
-}
-
static int plic_ariane_warm_irqchip_init(int m_cntx_id, int s_cntx_id)
{
int ret;
@@ -175,7 +168,6 @@ static int ariane_timer_init(bool cold_boot)
const struct sbi_platform_operations platform_ops = {
.early_init = ariane_early_init,
.final_init = ariane_final_init,
- .console_init = ariane_console_init,
.irqchip_init = ariane_irqchip_init,
.ipi_init = ariane_ipi_init,
.timer_init = ariane_timer_init,
diff --git a/platform/fpga/openpiton/platform.c b/platform/fpga/openpiton/platform.c
index 2317a89..dd74a0c 100644
--- a/platform/fpga/openpiton/platform.c
+++ b/platform/fpga/openpiton/platform.c
@@ -6,7 +6,6 @@
#include <sbi/riscv_asm.h>
#include <sbi/riscv_encoding.h>
#include <sbi/riscv_io.h>
-#include <sbi/sbi_console.h>
#include <sbi/sbi_const.h>
#include <sbi/sbi_hart.h>
#include <sbi/sbi_platform.h>
@@ -103,7 +102,10 @@ static int openpiton_early_init(bool cold_boot)
ACLINT_DEFAULT_MTIMECMP_OFFSET;
}
- return 0;
+ return uart8250_init(uart.addr, uart.freq, uart.baud,
+ OPENPITON_DEFAULT_UART_REG_SHIFT,
+ OPENPITON_DEFAULT_UART_REG_WIDTH,
+ OPENPITON_DEFAULT_UART_REG_OFFSET);
}
/*
@@ -122,19 +124,6 @@ static int openpiton_final_init(bool cold_boot)
return 0;
}
-/*
- * Initialize the openpiton console.
- */
-static int openpiton_console_init(void)
-{
- return uart8250_init(uart.addr,
- uart.freq,
- uart.baud,
- OPENPITON_DEFAULT_UART_REG_SHIFT,
- OPENPITON_DEFAULT_UART_REG_WIDTH,
- OPENPITON_DEFAULT_UART_REG_OFFSET);
-}
-
static int plic_openpiton_warm_irqchip_init(int m_cntx_id, int s_cntx_id)
{
int ret;
@@ -210,7 +199,6 @@ static int openpiton_timer_init(bool cold_boot)
const struct sbi_platform_operations platform_ops = {
.early_init = openpiton_early_init,
.final_init = openpiton_final_init,
- .console_init = openpiton_console_init,
.irqchip_init = openpiton_irqchip_init,
.ipi_init = openpiton_ipi_init,
.timer_init = openpiton_timer_init,
diff --git a/platform/generic/platform.c b/platform/generic/platform.c
index 1f46b76..3470474 100644
--- a/platform/generic/platform.c
+++ b/platform/generic/platform.c
@@ -221,9 +221,19 @@ static int generic_nascent_init(void)
static int generic_early_init(bool cold_boot)
{
- if (cold_boot)
+ int rc;
+
+ if (cold_boot) {
fdt_reset_init();
+ if (semihosting_enabled())
+ rc = semihosting_init();
+ else
+ rc = fdt_serial_init();
+ if (rc)
+ return rc;
+ }
+
if (!generic_plat || !generic_plat->early_init)
return 0;
@@ -378,14 +388,6 @@ static uint64_t generic_pmu_xlate_to_mhpmevent(uint32_t event_idx,
return evt_val;
}
-static int generic_console_init(void)
-{
- if (semihosting_enabled())
- return semihosting_init();
- else
- return fdt_serial_init();
-}
-
const struct sbi_platform_operations platform_ops = {
.cold_boot_allowed = generic_cold_boot_allowed,
.nascent_init = generic_nascent_init,
@@ -395,7 +397,6 @@ const struct sbi_platform_operations platform_ops = {
.final_exit = generic_final_exit,
.extensions_init = generic_extensions_init,
.domains_init = generic_domains_init,
- .console_init = generic_console_init,
.irqchip_init = fdt_irqchip_init,
.irqchip_exit = fdt_irqchip_exit,
.ipi_init = fdt_ipi_init,
diff --git a/platform/kendryte/k210/platform.c b/platform/kendryte/k210/platform.c
index 27b23f7..531adcd 100644
--- a/platform/kendryte/k210/platform.c
+++ b/platform/kendryte/k210/platform.c
@@ -9,7 +9,6 @@
#include <sbi/riscv_asm.h>
#include <sbi/riscv_encoding.h>
-#include <sbi/sbi_console.h>
#include <sbi/sbi_const.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_system.h>
@@ -109,10 +108,13 @@ static struct sbi_system_reset_device k210_reset = {
static int k210_early_init(bool cold_boot)
{
- if (cold_boot)
- sbi_system_reset_add_device(&k210_reset);
+ if (!cold_boot)
+ return 0;
- return 0;
+ sbi_system_reset_add_device(&k210_reset);
+
+ return sifive_uart_init(K210_UART_BASE_ADDR, k210_get_clk_freq(),
+ K210_UART_BAUDRATE);
}
static int k210_final_init(bool cold_boot)
@@ -130,12 +132,6 @@ static int k210_final_init(bool cold_boot)
return 0;
}
-static int k210_console_init(void)
-{
- return sifive_uart_init(K210_UART_BASE_ADDR, k210_get_clk_freq(),
- K210_UART_BAUDRATE);
-}
-
static int k210_irqchip_init(bool cold_boot)
{
int rc;
@@ -181,8 +177,6 @@ const struct sbi_platform_operations platform_ops = {
.final_init = k210_final_init,
- .console_init = k210_console_init,
-
.irqchip_init = k210_irqchip_init,
.ipi_init = k210_ipi_init,
diff --git a/platform/nuclei/ux600/platform.c b/platform/nuclei/ux600/platform.c
index f688b50..2289366 100644
--- a/platform/nuclei/ux600/platform.c
+++ b/platform/nuclei/ux600/platform.c
@@ -11,7 +11,6 @@
#include <sbi/riscv_asm.h>
#include <sbi/riscv_io.h>
#include <sbi/riscv_encoding.h>
-#include <sbi/sbi_console.h>
#include <sbi/sbi_const.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_system.h>
@@ -150,8 +149,10 @@ static int ux600_early_init(bool cold_boot)
{
u32 regval;
- if (cold_boot)
- sbi_system_reset_add_device(&ux600_reset);
+ if (!cold_boot)
+ return 0;
+
+ sbi_system_reset_add_device(&ux600_reset);
/* Measure CPU Frequency using Timer */
ux600_clk_freq = ux600_get_clk_freq();
@@ -163,7 +164,9 @@ static int ux600_early_init(bool cold_boot)
regval = readl((void *)(UX600_GPIO_ADDR + UX600_GPIO_IOF_EN_OFS)) |
UX600_GPIO_IOF_UART0_MASK;
writel(regval, (void *)(UX600_GPIO_ADDR + UX600_GPIO_IOF_EN_OFS));
- return 0;
+
+ return sifive_uart_init(UX600_DEBUG_UART, ux600_clk_freq,
+ UX600_UART_BAUDRATE);
}
static void ux600_modify_dt(void *fdt)
@@ -184,12 +187,6 @@ static int ux600_final_init(bool cold_boot)
return 0;
}
-static int ux600_console_init(void)
-{
- return sifive_uart_init(UX600_DEBUG_UART, ux600_clk_freq,
- UX600_UART_BAUDRATE);
-}
-
static int ux600_irqchip_init(bool cold_boot)
{
int rc;
@@ -234,7 +231,6 @@ static int ux600_timer_init(bool cold_boot)
const struct sbi_platform_operations platform_ops = {
.early_init = ux600_early_init,
.final_init = ux600_final_init,
- .console_init = ux600_console_init,
.irqchip_init = ux600_irqchip_init,
.ipi_init = ux600_ipi_init,
.timer_init = ux600_timer_init,
diff --git a/platform/template/platform.c b/platform/template/platform.c
index 4b3f2ac..b4d30a5 100644
--- a/platform/template/platform.c
+++ b/platform/template/platform.c
@@ -64,7 +64,12 @@ static struct aclint_mtimer_data mtimer = {
*/
static int platform_early_init(bool cold_boot)
{
- return 0;
+ if (!cold_boot)
+ return 0;
+
+ /* Example if the generic UART8250 driver is used */
+ return uart8250_init(PLATFORM_UART_ADDR, PLATFORM_UART_INPUT_FREQ,
+ PLATFORM_UART_BAUDRATE, 0, 1, 0);
}
/*
@@ -75,16 +80,6 @@ static int platform_final_init(bool cold_boot)
return 0;
}
-/*
- * Initialize the platform console.
- */
-static int platform_console_init(void)
-{
- /* Example if the generic UART8250 driver is used */
- return uart8250_init(PLATFORM_UART_ADDR, PLATFORM_UART_INPUT_FREQ,
- PLATFORM_UART_BAUDRATE, 0, 1, 0);
-}
-
/*
* Initialize the platform interrupt controller for current HART.
*/
@@ -143,7 +138,6 @@ static int platform_timer_init(bool cold_boot)
const struct sbi_platform_operations platform_ops = {
.early_init = platform_early_init,
.final_init = platform_final_init,
- .console_init = platform_console_init,
.irqchip_init = platform_irqchip_init,
.ipi_init = platform_ipi_init,
.timer_init = platform_timer_init
--
2.34.1
More information about the opensbi
mailing list