[PATCH] lib:firmware: Select preferred boot hart for cold boot.

[yangcheng.work at foxmail.com]

From: Cheng Yang <yangcheng.work at foxmail.com>

We now use the boot hart in struct fw_dynamic_info to do
relocate, but use a lottery algorithm when selecting the
cold boot hart. This may result in using a hart other
than the preferred boot hart to boot the next stage
firmware.

sbi_platform_cold_boot_allowed seems to be able to solve
this problem, but for most platforms all hartids are
allowed to cold boot. In this case, we still cannot
guarantee that the hart consistent with the preferred boot
hart will be used for cold boot.

Therefore, we should also save the preferred boot hart
information in scratch, so that we can select it first when
making cold start core selection. If no preferred boot hart
is specified then the lottery algorithm is used as before.

Signed-off-by: Cheng Yang <yangcheng.work at foxmail.com>
---
 firmware/fw_base.S        |  5 +++++
 include/sbi/sbi_scratch.h | 11 ++++++++++-
 lib/sbi/sbi_init.c        | 18 ++++++++++++------
 3 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/firmware/fw_base.S b/firmware/fw_base.S
index f7763f4..88abd45 100644
--- a/firmware/fw_base.S
+++ b/firmware/fw_base.S
@@ -333,6 +333,11 @@ _scratch_init:
 #endif
 	REG_S	a0, SBI_SCRATCH_OPTIONS_OFFSET(tp)
 	MOV_3R	a0, s0, a1, s1, a2, s2
+	/* Store boot hart in scratch space */
+	MOV_3R	s0, a0, s1, a1, s2, a2
+	call	fw_boot_hart
+	REG_S	a0, SBI_SCRATCH_BOOT_HART_OFFSET(tp)
+	MOV_3R	a0, s0, a1, s1, a2, s2
 	/* Move to next scratch space */
 	add	t1, t1, t2
 	blt	t1, s7, _scratch_init
diff --git a/include/sbi/sbi_scratch.h b/include/sbi/sbi_scratch.h
index e6a33ba..1cf2b5e 100644
--- a/include/sbi/sbi_scratch.h
+++ b/include/sbi/sbi_scratch.h
@@ -42,8 +42,10 @@
 #define SBI_SCRATCH_TMP0_OFFSET			(12 * __SIZEOF_POINTER__)
 /** Offset of options member in sbi_scratch */
 #define SBI_SCRATCH_OPTIONS_OFFSET		(13 * __SIZEOF_POINTER__)
+/** Offset of boot_hart member in sbi_scratch */
+#define SBI_SCRATCH_BOOT_HART_OFFSET		(14 * __SIZEOF_POINTER__)
 /** Offset of extra space in sbi_scratch */
-#define SBI_SCRATCH_EXTRA_SPACE_OFFSET		(14 * __SIZEOF_POINTER__)
+#define SBI_SCRATCH_EXTRA_SPACE_OFFSET		(15 * __SIZEOF_POINTER__)
 /** Maximum size of sbi_scratch (4KB) */
 #define SBI_SCRATCH_SIZE			(0x1000)
 
@@ -83,6 +85,8 @@ struct sbi_scratch {
 	unsigned long tmp0;
 	/** Options for OpenSBI library */
 	unsigned long options;
+	/** Preferred boot HART id */
+	unsigned long boot_hart;
 };
 
 /**
@@ -144,6 +148,11 @@ _Static_assert(
 		== SBI_SCRATCH_OPTIONS_OFFSET,
 	"struct sbi_scratch definition has changed, please redefine "
 	"SBI_SCRATCH_OPTIONS_OFFSET");
+_Static_assert(
+	offsetof(struct sbi_scratch, boot_hart)
+		== SBI_SCRATCH_BOOT_HART_OFFSET,
+	"struct sbi_scratch definition has changed, please redefine "
+	"SBI_SCRATCH_BOOT_HART_OFFSET");
 
 /** Possible options for OpenSBI library */
 enum sbi_scratch_options {
diff --git a/lib/sbi/sbi_init.c b/lib/sbi/sbi_init.c
index 804b01c..2c631f6 100644
--- a/lib/sbi/sbi_init.c
+++ b/lib/sbi/sbi_init.c
@@ -573,14 +573,20 @@ void __noreturn sbi_init(struct sbi_scratch *scratch)
 	 * HART because the coldboot HART will be directly jumping to
 	 * the next booting stage.
 	 *
-	 * We use a lottery mechanism to select coldboot HART among
-	 * HARTs which satisfy above condition.
+	 * We select coldboot HART among HARTs which satisfy above condition.
+	 * If the preferred boot hart is not specified, we use a lottery
+	 * algorithm to select a cold boot hart, otherwise the preferred 
+	 * boot core is selected.
 	 */
 
-	if (sbi_platform_cold_boot_allowed(plat, hartid)) {
-		if (next_mode_supported &&
-		    atomic_xchg(&coldboot_lottery, 1) == 0)
-			coldboot = true;
+	if (sbi_platform_cold_boot_allowed(plat, hartid) && next_mode_supported) {
+		if (scratch->boot_hart == -1) {
+			if (atomic_xchg(&coldboot_lottery, 1) == 0)
+				coldboot = true;
+		} else {
+			if (scratch->boot_hart == hartid)
+				coldboot = true;
+		}
 	}
 
 	/*
-- 
2.34.1