[PATCH v2 02/11] sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device

[Yu Chien Peter Lin]

Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.

Signed-off-by: Yu Chien Peter Lin <peterlin at andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
---
Changes v1 -> v2:
  - No change
---
 include/sbi/sbi_pmu.h | 6 ++++++
 lib/sbi/sbi_pmu.c     | 5 ++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
index 16f6877..d63149c 100644
--- a/include/sbi/sbi_pmu.h
+++ b/include/sbi/sbi_pmu.h
@@ -89,6 +89,12 @@ struct sbi_pmu_device {
 	 * Custom function returning the machine-specific irq-bit.
 	 */
 	int (*hw_counter_irq_bit)(void);
+
+	/**
+	 * Custom function to inhibit counting of events while in
+	 * specified mode.
+	 */
+	void (*hw_counter_filter_mode)(unsigned long flags, int counter_index);
 };
 
 /** Get the PMU platform device */
diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 3cbd4ff..7e3723f 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -599,7 +599,10 @@ static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt, int ctr_idx,
 		pmu_dev->hw_counter_disable_irq(ctr_idx);
 
 	/* Update the inhibit flags based on inhibit flags received from supervisor */
-	pmu_update_inhibit_flags(flags, &mhpmevent_val);
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
+		pmu_update_inhibit_flags(flags, &mhpmevent_val);
+	if (pmu_dev && pmu_dev->hw_counter_filter_mode)
+		pmu_dev->hw_counter_filter_mode(flags, ctr_idx);
 
 #if __riscv_xlen == 32
 	csr_write_num(CSR_MHPMEVENT3 + ctr_idx - 3, mhpmevent_val & 0xFFFFFFFF);
-- 
2.34.1