答复: 答复: [PATCH 1/1] Add RISC-V TEE support
liushiwei
liushiwei at eswincomputing.com
Mon Jan 16 05:09:15 PST 2023
Hi，Anup
I edit it in https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc. I tried to push a document edit commit [https://github.com/riscv-non-isa/riscv-sbi-doc/pull/106]. Please check. Am I doing what you expect me to do
Thanks
Liushiwei
-----邮件原件-----
发件人: Anup Patel [mailto:anup at brainfault.org]
发送时间: 2023年1月13日 20:00
收件人: liushiwei <liushiwei at eswincomputing.com>
抄送: Himanshu Chauhan <hchauhan at ventanamicro.com>; opensbi at lists.infradead.org; chenchaokai at eswincomputing.com
主题: Re: 答复: [PATCH 1/1] Add RISC-V TEE support
On Thu, Jan 12, 2023 at 12:38 PM liushiwei <liushiwei at eswincomputing.com> wrote:
>
> Hi, Himanshu , These are my description:
>
> In my design, The entire linux space is called REE (Rich Execution
> Environment), and TEE OS includes its user state called TEE (Trusted execution environment).
> adding TEE functionality to opensbi requires two configuration items.
> For example:
> add CONFIG_SBI_ECALL_TEE=y in platform/generic/configs/defconfig file.
> add CONFIG_TEE_LOAD_ADDR=0x27C000000 platform/generic/objects.mk.
> The value of CONFIG_TEE_LOAD_ADDR depends on the actual memory layout,
> It's a physical address.
>
> When TEE is configured, opensbi adds the following functionality:
> 1. Boot TEE OS.
> If TEE is enabled, tee_os_init() is called before entering
> sbi_hart_switch_mode(). tee_os_init saves the current context,
> sets a new trap stack address, and runs to CONFIG_TEE_LOAD_ADDR as configured
> to complete TEE OS initialization. TEE OS returns via ecall, Go to opensbi
> sbi_ecall_tee_handler and use the characteristic value RETURN_ENTRY_DONE
> to indicate the return after the TEE OS completes booting. Check whether the
> TEE OS boot successfully according to the parameter. If fails,
> the system enters wfi and terminates the startup process of opensbi. If successful,
> it returns REE to switch into TEE's vector. then trap stack memory is restored,
> the context is restored, the tee_os_init call is returned,
> and the rest of the process is performed.
> 2. REE switches to TEE.
> When the TEE OS boot successfully, it returns an entry vector for REE into the TEE.
> It represents various entry points into TEE OS and is stored in opensbi's global variables.
> It is the optee_vectors_t structure, which contains nine entry cases:
> 1. yield_smc_entry;
> 2. fast_smc_entry;
> 3. cpu_on_entry;
> 4. cpu_off_entry;
> 5. cpu_resume_entry;
> 6. cpu_suspend_entry;
> 7. fiq_entry;
> 8. system_off_entry;
> 9. system_reset_entry;
> yield_smc_entry means that this function entry TEE will start the thread function
> and enter the user state of TEE. It may also switch back to REE with RPC function,
> and then return to TEE after REE completes the corresponding function.
> For the REE process that sent you this call, it may cause sleep.
>
> fast_smc_entry indicates that this is a quick function that returns after
> the TEE OS does something, and that it does not cause the caller to sleep.
>
> yield_smc_entry and fast_smc_entry return opensbi use eigenvalue RETURN_CALL_DONE.
> for yield_smc_entry, whether the call returns or the RPC returns is decided by linux.
>
> cpu_on_entry/cpu_off_entry/cpu_resume_entry/cpu_suspend_entry and
> fiq_entry/system_off_entry/system_reset_entry they are not implemented currently.
>
> 3. TEE switches to REE.
> opensbi needs to save the context when REE enters the TEE,
> and restore the context when it returns from the TEE.
>
> 4. TEE/REE Request a special function.
> We have some specific functions, like get hartid from TEE,
> it need save and restore the TEE context.
>
> Data structure.
> opensbi adds the sbi_save_context declaration
> struct sbi_save_context {
> struct sbi_trap_regs regs;
> unsigned long sepc;
> unsigned long satp;
> unsigned long sstatus;
> unsigned long sie;
> unsigned long stvec;
> unsigned long sscratch;
> unsigned long scounteren;
> unsigned long scause;
> unsigned long stval;
> unsigned long sip;
> };
> sbi_save_context include sbi_trap_regs and S mode csr. Used to hold
> the context of TEE or REE
>
> typedef struct optee_vectors {
> optee_vector_isn_t yield_smc_entry;
> optee_vector_isn_t fast_smc_entry;
> optee_vector_isn_t cpu_on_entry;
> optee_vector_isn_t cpu_off_entry;
> optee_vector_isn_t cpu_resume_entry;
> optee_vector_isn_t cpu_suspend_entry;
> optee_vector_isn_t fiq_entry;
> optee_vector_isn_t system_off_entry;
> optee_vector_isn_t system_reset_entry;
> } optee_vectors_t;
> optee_vectors represent the various entry points into TEE OS.
>
> Variables defined by opensbi
> optee_vectors_t *optee_vector_table;
> struct sbi_save_context nsec_cpu_context[OPTEED_CORE_COUNT];
> struct sbi_save_context sec_cpu_context[OPTEED_CORE_COUNT];
> struct sbi_trap_regs cpu_start_context[OPTEED_CORE_COUNT];
> typedef ulong tee_tmp_trap_stack[1024];
> static tee_tmp_trap_stack tmp_stack[OPTEED_CORE_COUNT];
>
> optee_vector_table value is assigned after the TEE OS boot succeeds.
> nsec_cpu_context and sec_cpu_context is to save the context of TEE and REE,
> cpu_start_context save the context of opensbi before tee_os_init enter TEE OS,
> tee_tmp_stack is the trap stack when TEE OS return tee_os_init.
>
> Under the current design, REE does not enable interrupts when entering
> TEE, and the entire TEE, including opensbi, is the process context of linux.
> TEE processing must be brief and quick.
Looks like you do have some write-up for your proof-of-concept implementation which is good but we can look at your patches only after we have discussed your SBI OPTEE proposal.
I suggest you should create a textual/adoc description as if you are writing a chapter for https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
After you have this textual/adoc writeup for SBI OPTEE, we can discuss this in the Platform runtime services (PRS) or Trusted computing SIG meeting.
Your patches can be reviewed only after there is enough agreement on your SBI OPTEE proposal.
Regards,
Anup
>
>
> Regards,
> liushiwei
> -----邮件原件-----
> 发件人: Himanshu Chauhan [mailto:hchauhan at ventanamicro.com]
> 发送时间: 2023年1月11日 23:39
> 收件人: liushiwei <liushiwei at eswincomputing.com>
> 抄送: opensbi at lists.infradead.org; chenchaokai at eswincomputing.com
> 主题: Re: 答复: [PATCH 1/1] Add RISC-V TEE support
>
> On Wed, Jan 11, 2023 at 08:27:59PM +0800, liushiwei wrote:
> > Do you mean hardware? Our hardware design referred to arm's
> > trustzone technology. optee os is a software solution using arm
> > trustzone hardware, which mainly includes REE(linux), TEE(optee os),
> > ATF(ARM Trusted firmware), and then our software also developed
> > these three parts. opensbi is similar to ATF. whether if this is what you want?
> > The current committed code is not hardware-dependent, but just
> > continues the idea of this workaround, and we may commit hardware-dependent code later.
> >
> No, I meant the software specification.
>
> > -----邮件原件-----
> > 发件人: hchauhan at ventanamicro.com [mailto:hchauhan at ventanamicro.com]
> > 发送时间: 2023年1月11日 20:03
> > 收件人: 'liushiwei' <liushiwei at eswincomputing.com>; opensbi at lists.infradead.
> > org
> > 抄送: chenchaokai at eswincomputing.com
> > 主题: RE: [PATCH 1/1] Add RISC-V TEE support
> >
> > -----Original Message-----
> > > From: opensbi <opensbi-bounces at lists.infradead.org> On Behalf Of
> > > liushiwei
> > > Sent: 11 January 2023 07:32
> > > To: opensbi at lists.infradead.org
> > > Cc: chenchaokai at eswincomputing.com; liushiwei
> > <liushiwei at eswincomputing.com>
> > > Subject: [PATCH 1/1] Add RISC-V TEE support
> >
> > >RISC-V Trusted Executable Environment security software includes
> > >linux,
> > opensbi, and OP-TEE OS. linux is the non-secure domain, and OP-TEE
> > OS is the secure domain. At boot time, opensbi boots OP->TEE OS and then starts linux.
> > At runtime, opensbi acts as a secure monitor, responsible for
> > context saving and restoring when switching between linux and OP-TEE OS.
> > >TEE function is off by default, when using configuration is added
> > >in the
> > config and objects file, such as platform/generic/configs/defconfig
> > add CONFIG_SBI_ECALL_TEE = y, In the >platform/generic/objects.mk
> > add CONFIG_TEE_LOAD_ADDR = 0x27c000000, CONFIG_TEE_LOAD_ADDR is the
> > starting address of the OP-TEE OS.
> >
> > Hi Liushiwei,
> >
> > Was there any formal specification or draft for this? Could you
> > please point me to the draft or specification?
> >
> > Regards
> > Himanshu
> >
> > --
> > opensbi mailing list
> > opensbi at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/opensbi
> >
>
>
> --
> opensbi mailing list
> opensbi at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/opensbi
More information about the opensbi
mailing list