[PATCH v4 5/7] lib: sbi: Implement SBI debug console extension
Atish Patra
atishp at atishpatra.org
Mon Jan 9 01:35:54 PST 2023
On Wed, Jan 4, 2023 at 6:50 AM Anup Patel <apatel at ventanamicro.com> wrote:
>
> We implement SBI debug console extension as one of the replacement
> SBI extensions. This extension is only available when OpenSBI platform
> provides a console device to generic library.
>
> Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> Reviewed-by: Xiang W <wxjstz at 126.com>
> Reviewed-by: Bin Meng <bmeng at tinylab.org>
> ---
> lib/sbi/Kconfig | 4 +++
> lib/sbi/objects.mk | 3 ++
> lib/sbi/sbi_ecall_dbcn.c | 69 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 76 insertions(+)
> create mode 100644 lib/sbi/sbi_ecall_dbcn.c
>
> diff --git a/lib/sbi/Kconfig b/lib/sbi/Kconfig
> index df74bba..ef6728b 100644
> --- a/lib/sbi/Kconfig
> +++ b/lib/sbi/Kconfig
> @@ -26,6 +26,10 @@ config SBI_ECALL_PMU
> bool "Performance Monitoring Unit extension"
> default y
>
> +config SBI_ECALL_DBCN
> + bool "Debug Console extension"
> + default y
> +
> config SBI_ECALL_LEGACY
> bool "SBI v0.1 legacy extensions"
> default y
> diff --git a/lib/sbi/objects.mk b/lib/sbi/objects.mk
> index c774ebb..319f38d 100644
> --- a/lib/sbi/objects.mk
> +++ b/lib/sbi/objects.mk
> @@ -37,6 +37,9 @@ libsbi-objs-$(CONFIG_SBI_ECALL_SRST) += sbi_ecall_srst.o
> carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_PMU) += ecall_pmu
> libsbi-objs-$(CONFIG_SBI_ECALL_PMU) += sbi_ecall_pmu.o
>
> +carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_DBCN) += ecall_dbcn
> +libsbi-objs-$(CONFIG_SBI_ECALL_DBCN) += sbi_ecall_dbcn.o
> +
> carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_LEGACY) += ecall_legacy
> libsbi-objs-$(CONFIG_SBI_ECALL_LEGACY) += sbi_ecall_legacy.o
>
> diff --git a/lib/sbi/sbi_ecall_dbcn.c b/lib/sbi/sbi_ecall_dbcn.c
> new file mode 100644
> index 0000000..8c6a728
> --- /dev/null
> +++ b/lib/sbi/sbi_ecall_dbcn.c
> @@ -0,0 +1,69 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2022 Ventana Micro Systems Inc.
> + *
> + * Authors:
> + * Anup Patel <apatel at ventanamicro.com>
> + */
> +
> +#include <sbi/sbi_console.h>
> +#include <sbi/sbi_domain.h>
> +#include <sbi/sbi_error.h>
> +#include <sbi/sbi_ecall.h>
> +#include <sbi/sbi_ecall_interface.h>
> +#include <sbi/sbi_trap.h>
> +#include <sbi/riscv_asm.h>
> +
> +static int sbi_ecall_dbcn_handler(unsigned long extid, unsigned long funcid,
> + const struct sbi_trap_regs *regs,
> + unsigned long *out_val,
> + struct sbi_trap_info *out_trap)
> +{
> + ulong smode = (csr_read(CSR_MSTATUS) & MSTATUS_MPP) >>
> + MSTATUS_MPP_SHIFT;
> +
> + switch (funcid) {
> + case SBI_EXT_DBCN_CONSOLE_WRITE:
> + case SBI_EXT_DBCN_CONSOLE_READ:
> + /*
> + * On RV32, the M-mode can only access the first 4GB of
> + * the physical address space because M-mode does not have
> + * MMU to access full 34-bit physical address space.
> + *
> + * Based on above, we simply fail if the upper 32bits of
> + * the physical address (i.e. a2 register) is non-zero on
> + * RV32.
> + */
> +#if __riscv_xlen == 32
> + if (regs->a2)
> + return SBI_ERR_FAILED;
> +#endif
> + if (!sbi_domain_check_addr_range(sbi_domain_thishart_ptr(),
> + regs->a1, regs->a0, smode,
> + SBI_DOMAIN_READ|SBI_DOMAIN_WRITE))
> + return SBI_EINVALID_ADDR;
> + if (funcid == SBI_EXT_DBCN_CONSOLE_WRITE)
> + sbi_nputs((const char *)regs->a1, regs->a0);
> + else
> + *out_val = sbi_ngets((char *)regs->a1, regs->a0);
> + return 0;
> + default:
> + break;
> + }
> +
> + return SBI_ENOTSUPP;
> +}
> +
> +static int sbi_ecall_dbcn_probe(unsigned long extid, unsigned long *out_val)
> +{
> + *out_val = (sbi_console_get_device()) ? 1 : 0;
> + return 0;
> +}
> +
> +struct sbi_ecall_extension ecall_dbcn = {
> + .extid_start = SBI_EXT_DBCN,
> + .extid_end = SBI_EXT_DBCN,
> + .handle = sbi_ecall_dbcn_handler,
> + .probe = sbi_ecall_dbcn_probe,
> +};
> --
> 2.34.1
>
Reviewed-by: Atish Patra <atishp at rivosinc.com>
--
Regards,
Atish
More information about the opensbi
mailing list