[RFC PATCH 11/11] platform: generic: Add system suspend test
Andrew Jones
ajones at ventanamicro.com
Fri Jan 6 03:22:09 PST 2023
When the system-suspend-test property is present in the domain config
node as shown below, implement system suspend with a simple 5 second
delay followed by a WFI. This allows testing system suspend when the
low-level firmware doesn't support it.
/ {
chosen {
opensbi-domains {
compatible = "opensbi,domain,config";
system-suspend-test;
};
Signed-off-by: Andrew Jones <ajones at ventanamicro.com>
---
docs/domain_support.md | 4 ++++
include/sbi/sbi_system.h | 1 +
lib/sbi/sbi_system.c | 30 ++++++++++++++++++++++++++++++
platform/generic/platform.c | 20 +++++++++++++++++++-
4 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/docs/domain_support.md b/docs/domain_support.md
index b2c1023008cc..d86628049b62 100644
--- a/docs/domain_support.md
+++ b/docs/domain_support.md
@@ -126,6 +126,9 @@ The DT properties of a domain configuration DT node are as follows:
* **compatible** (Mandatory) - The compatible string of the domain
configuration. This DT property should have value *"opensbi,domain,config"*
+* **system-suspend-test** (Optional) - When present, enable a system
+ suspend test implementation which simply waits five seconds and issues a WFI.
+
### Domain Memory Region Node
The domain memory region DT node describes details of a memory region and
@@ -226,6 +229,7 @@ be done:
chosen {
opensbi-domains {
compatible = "opensbi,domain,config";
+ system-suspend-test;
tmem: tmem {
compatible = "opensbi,domain,memregion";
diff --git a/include/sbi/sbi_system.h b/include/sbi/sbi_system.h
index 65ea3d36d6cf..7d0867f276aa 100644
--- a/include/sbi/sbi_system.h
+++ b/include/sbi/sbi_system.h
@@ -57,6 +57,7 @@ struct sbi_system_suspend_device {
const struct sbi_system_suspend_device *sbi_system_suspend_get_device(void);
void sbi_system_suspend_set_device(struct sbi_system_suspend_device *dev);
+void sbi_system_suspend_test_enable(void);
bool sbi_system_suspend_supported(u32 sleep_type);
int sbi_system_suspend(u32 sleep_type, ulong resume_addr, ulong opaque);
diff --git a/lib/sbi/sbi_system.c b/lib/sbi/sbi_system.c
index c18562cdcfab..3242b21699cb 100644
--- a/lib/sbi/sbi_system.c
+++ b/lib/sbi/sbi_system.c
@@ -17,6 +17,7 @@
#include <sbi/sbi_system.h>
#include <sbi/sbi_ipi.h>
#include <sbi/sbi_init.h>
+#include <sbi/sbi_timer.h>
static SBI_LIST_HEAD(reset_devices_list);
@@ -108,6 +109,35 @@ void sbi_system_suspend_set_device(struct sbi_system_suspend_device *dev)
suspend_dev = dev;
}
+static int sbi_system_suspend_test_check(u32 sleep_type)
+{
+ return sleep_type == SBI_SUSP_SLEEP_TYPE_SUSPEND;
+}
+
+static int sbi_system_suspend_test_suspend(u32 sleep_type)
+{
+ if (sleep_type != SBI_SUSP_SLEEP_TYPE_SUSPEND)
+ return SBI_EINVAL;
+
+ sbi_timer_mdelay(5000);
+
+ /* Wait for interrupt */
+ wfi();
+
+ return SBI_OK;
+}
+
+static struct sbi_system_suspend_device sbi_system_suspend_test = {
+ .name = "system-suspend-test",
+ .system_suspend_check = sbi_system_suspend_test_check,
+ .system_suspend = sbi_system_suspend_test_suspend,
+};
+
+void sbi_system_suspend_test_enable(void)
+{
+ sbi_system_suspend_set_device(&sbi_system_suspend_test);
+}
+
bool sbi_system_suspend_supported(u32 sleep_type)
{
return suspend_dev && suspend_dev->system_suspend_check &&
diff --git a/platform/generic/platform.c b/platform/generic/platform.c
index bfe15f0d6b87..b3a3351c0439 100644
--- a/platform/generic/platform.c
+++ b/platform/generic/platform.c
@@ -13,6 +13,7 @@
#include <sbi/sbi_hartmask.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_string.h>
+#include <sbi/sbi_system.h>
#include <sbi_utils/fdt/fdt_domain.h>
#include <sbi_utils/fdt/fdt_fixup.h>
#include <sbi_utils/fdt/fdt_helper.h>
@@ -215,7 +216,24 @@ static int generic_extensions_init(struct sbi_hart_features *hfeatures)
static int generic_domains_init(void)
{
- return fdt_domains_populate(fdt_get_address());
+ void *fdt = fdt_get_address();
+ int offset, ret;
+
+ ret = fdt_domains_populate(fdt);
+ if (ret < 0)
+ return ret;
+
+ offset = fdt_path_offset(fdt, "/chosen");
+
+ if (offset >= 0) {
+ offset = fdt_node_offset_by_compatible(fdt, offset,
+ "opensbi,domain,config");
+ if (offset >= 0 &&
+ fdt_get_property(fdt, offset, "system-suspend-test", NULL))
+ sbi_system_suspend_test_enable();
+ }
+
+ return 0;
}
static u64 generic_tlbr_flush_limit(void)
--
2.39.0
More information about the opensbi
mailing list