[PATCH v2 1/7] lib: utils: serial: Add Renesas SCIF driver
Prabhakar
prabhakar.csengg at gmail.com
Fri Nov 11 10:20:59 PST 2022
From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
Add Renesas SCIF driver.
Based on a patch in the BSP by Takeki Hamada
<takeki.hamada.ak at bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
RFC->v2
* Fixed comments pointed by Xiang W
---
include/sbi_utils/serial/renesas-scif.h | 11 ++
lib/utils/serial/Kconfig | 4 +
lib/utils/serial/objects.mk | 1 +
lib/utils/serial/renesas_scif.c | 139 ++++++++++++++++++++++++
4 files changed, 155 insertions(+)
create mode 100644 include/sbi_utils/serial/renesas-scif.h
create mode 100644 lib/utils/serial/renesas_scif.c
diff --git a/include/sbi_utils/serial/renesas-scif.h b/include/sbi_utils/serial/renesas-scif.h
new file mode 100644
index 0000000..0002a1a
--- /dev/null
+++ b/include/sbi_utils/serial/renesas-scif.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+
+#ifndef __SERIAL_RENESAS_SCIF_H__
+#define __SERIAL_RENESAS_SCIF_H__
+
+int renesas_scif_init(unsigned long base, u32 in_freq, u32 baudrate);
+
+#endif /* __SERIAL_RENESAS_SCIF_H__ */
diff --git a/lib/utils/serial/Kconfig b/lib/utils/serial/Kconfig
index da549a7..f6ed803 100644
--- a/lib/utils/serial/Kconfig
+++ b/lib/utils/serial/Kconfig
@@ -59,6 +59,10 @@ config SERIAL_GAISLER
bool "Gaisler UART support"
default n
+config SERIAL_RENESAS_SCIF
+ bool "Renesas SCIF support"
+ default n
+
config SERIAL_SHAKTI
bool "Shakti UART support"
default n
diff --git a/lib/utils/serial/objects.mk b/lib/utils/serial/objects.mk
index 98f3f9a..6520424 100644
--- a/lib/utils/serial/objects.mk
+++ b/lib/utils/serial/objects.mk
@@ -36,6 +36,7 @@ libsbiutils-objs-$(CONFIG_FDT_SERIAL_XILINX_UARTLITE) += serial/fdt_serial_xlnx_
libsbiutils-objs-$(CONFIG_SERIAL_CADENCE) += serial/cadence-uart.o
libsbiutils-objs-$(CONFIG_SERIAL_GAISLER) += serial/gaisler-uart.o
+libsbiutils-objs-$(CONFIG_SERIAL_RENESAS_SCIF) += serial/renesas_scif.o
libsbiutils-objs-$(CONFIG_SERIAL_SHAKTI) += serial/shakti-uart.o
libsbiutils-objs-$(CONFIG_SERIAL_SIFIVE) += serial/sifive-uart.o
libsbiutils-objs-$(CONFIG_SERIAL_LITEX) += serial/litex-uart.o
diff --git a/lib/utils/serial/renesas_scif.c b/lib/utils/serial/renesas_scif.c
new file mode 100644
index 0000000..0586e1a
--- /dev/null
+++ b/lib/utils/serial/renesas_scif.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * Copyright (C) 2022 Renesas Electronics Corporation
+ */
+
+#include <sbi/riscv_io.h>
+#include <sbi/sbi_console.h>
+#include <sbi/sbi_timer.h>
+#include <sbi_utils/serial/renesas-scif.h>
+
+/* clang-format off */
+
+#define SCIF_REG_SMR 0x0
+#define SCIF_REG_BRR 0x2
+#define SCIF_REG_SCR 0x4
+#define SCIF_REG_FTDR 0x6
+#define SCIF_REG_FSR 0x8
+#define SCIF_REG_FRDR 0xa
+#define SCIF_REG_FCR 0xc
+#define SCIF_REG_LSR 0x12
+#define SCIF_REG_SEMR 0x14
+
+#define SCIF_RFRST 0x2 /* Reset assert receive-FIFO (bit[1]) */
+#define SCIF_TFRST 0x4 /* Reset assert transmit-FIFO(bit[2]) */
+
+#define SCIF_FCR_RST_ASSRT_TFRF (SCIF_RFRST | SCIF_TFRST) /* Reset assert tx-FIFO & rx-FIFO */
+#define SCIF_FCR_RST_NGATE_TFRF 0x0 /* Reset negate tx-FIFO & rx-FIFO*/
+
+#define SCIF_RE 0x10 /* Enable receive (bit[4]) */
+#define SCIF_TE 0x20 /* Enable transmit(bit[5]) */
+#define SCIF_SCR_RCV_TRN_EN (SCIF_RE | SCIF_TE) /* Enable receive & transmit */
+#define SCIF_SCR_RCV_TRN_DIS 0x0 /* Disable receive & transmit */
+
+#define SCIF_FSR_ER 0x80 /* Receive error flag */
+#define SCIF_FSR_TEND 0x40 /* Detect break flag */
+#define SCIF_FSR_TDFE 0x20 /* Detect break flag */
+#define SCIF_FSR_BRK 0x10 /* Detect break flag */
+#define SCIF_FSR_RDF 0x2 /* Receive FIFO data full flag */
+#define SCIF_FSR_DR 0x1 /* Receive data ready flag */
+
+#define SCIF_FSR_RXD_CHK (SCIF_FSR_ER | SCIF_FSR_BRK | SCIF_FSR_DR)
+#define SCIF_FSR_TXD_CHK (SCIF_FSR_TEND | SCIF_FSR_TDFE)
+
+#define SCIF_LSR_ORER 0x1 /* Overrun error flag */
+
+#define SCIF_SPTR_SPB2DT 0x1 /* if SCR.TE setting, don't care */
+#define SCIF_SPTR_SPB2IO 0x2 /* if SCR.TE setting, don't care */
+
+#define SCIF_SEMR_BRME 0x20 /* bit-rate modulation enable */
+#define SCIF_SEMR_MDDRS 0x10 /* MDDR access enable */
+
+#define SCIF_SIZE(reg) ((reg == SCIF_REG_BRR) || \
+ (reg == SCIF_REG_FTDR) || \
+ (reg == SCIF_REG_FRDR) || \
+ (reg == SCIF_REG_SEMR))
+
+#define SCBRR_VALUE(clk, baudrate) ((clk) / (32 * (baudrate)) - 1)
+
+/* clang-format on */
+
+static volatile char *scif_base;
+
+static u32 get_reg(u32 offset)
+{
+ if (SCIF_SIZE(offset))
+ return readb(scif_base + offset);
+
+ return readw(scif_base + offset);
+}
+
+static void set_reg(u32 offset, u32 val)
+{
+ if (SCIF_SIZE(offset))
+ return writeb(val, scif_base + offset);
+
+ return writew(val, scif_base + offset);
+}
+
+static void scif_wait(unsigned long baudrate)
+{
+ unsigned long utime;
+
+ utime = 1000000 / baudrate + 1;
+
+ sbi_timer_udelay(utime);
+}
+
+static void renesas_scif_putc(char ch)
+{
+ uint16_t reg;
+
+ while (!(SCIF_FSR_TXD_CHK & get_reg(SCIF_REG_FSR)))
+ ;
+
+ set_reg(SCIF_REG_FTDR, ch);
+ reg = get_reg(SCIF_REG_FSR);
+ reg &= ~SCIF_FSR_TXD_CHK;
+ set_reg(SCIF_REG_FSR, reg);
+}
+
+static struct sbi_console_device renesas_scif_console = {
+ .name = "renesas_scif",
+ .console_putc = renesas_scif_putc,
+};
+
+int renesas_scif_init(unsigned long base, u32 in_freq, u32 baudrate)
+{
+ volatile uint16_t data16;
+
+ scif_base = (volatile char *)base;
+
+ set_reg(SCIF_REG_SCR, SCIF_SCR_RCV_TRN_DIS); /* Disable receive & transmit */
+ set_reg(SCIF_REG_FCR, SCIF_FCR_RST_ASSRT_TFRF); /* Reset assert tx-FIFO & rx-FIFO */
+
+ data16 = get_reg(SCIF_REG_FSR); /* Dummy read */
+ set_reg(SCIF_REG_FSR, 0x0); /* Clear all error bit */
+
+ data16 = get_reg(SCIF_REG_LSR); /* Dummy read */
+ set_reg(SCIF_REG_LSR, 0x0); /* Clear ORER bit */
+
+ set_reg(SCIF_REG_SCR, 0x0); /* Select internal clock, SC_CLK pin unused for output pin */
+
+ set_reg(SCIF_REG_SMR, 0x0); /* Set asynchronous, 8bit data, no-parity, 1 stop and Po/1 */
+
+ data16 = get_reg(SCIF_REG_SEMR);
+ set_reg(SCIF_REG_SEMR, data16 & (~SCIF_SEMR_MDDRS)); /* Select to access BRR */
+ set_reg(SCIF_REG_BRR, SCBRR_VALUE(in_freq, baudrate));
+
+ scif_wait(baudrate);
+
+ /* FTCR is left at initial value, because this interrupt isn't used. */
+ set_reg(SCIF_REG_FCR, SCIF_FCR_RST_NGATE_TFRF); /* Reset negate tx-FIFO, rx-FIFO. */
+
+ set_reg(SCIF_REG_SCR, SCIF_SCR_RCV_TRN_EN); /* Enable receive & transmit w/SC_CLK=no output */
+
+ sbi_console_set_device(&renesas_scif_console);
+
+ return 0;
+}
--
2.17.1
More information about the opensbi
mailing list