[PATCH v3 2/3] lib: utils: check if CPU node is enabled

[Jan Remeš]

On Fri, May 13, 2022 at 6:15 AM Anup Patel <anup at brainfault.org> wrote:
>
> On Thu, May 12, 2022 at 11:26 PM Jan Remes <jan.remes at codasip.com> wrote:
> >
> > Ignore CPU nodes in FDT that are not enabled.
> >
> > Signed-off-by: Jan Remes <jan.remes at codasip.com>
> > ---
> >  lib/utils/fdt/fdt_domain.c | 14 +++++++++++++-
> >  lib/utils/fdt/fdt_fixup.c  |  3 +++
> >  lib/utils/fdt/fdt_helper.c |  3 +++
> >  3 files changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/lib/utils/fdt/fdt_domain.c b/lib/utils/fdt/fdt_domain.c
> > index 676c757..bd0eec3 100644
> > --- a/lib/utils/fdt/fdt_domain.c
> > +++ b/lib/utils/fdt/fdt_domain.c
> > @@ -165,6 +165,9 @@ void fdt_domain_fixup(void *fdt)
> >                 if (err)
> >                         continue;
> >
> > +               if (!fdt_node_is_enabled(fdt, doffset))
> > +                       continue;
> > +
> >                 fdt_nop_property(fdt, doffset, "opensbi-domain");
> >         }
> >
> > @@ -308,6 +311,9 @@ static int __fdt_parse_domain(void *fdt, int domain_offset, void *opaque)
> >                         if (err)
> >                                 return err;
> >
> > +                       if (!fdt_node_is_enabled(fdt, cpu_offset))
> > +                               continue;
> > +
> >                         sbi_hartmask_set_hart(val32, mask);
> >                 }
> >         }
> > @@ -347,7 +353,7 @@ static int __fdt_parse_domain(void *fdt, int domain_offset, void *opaque)
> >         if (val && len >= 4) {
> >                 cpu_offset = fdt_node_offset_by_phandle(fdt,
> >                                                          fdt32_to_cpu(*val));
> > -               if (cpu_offset >= 0)
> > +               if (cpu_offset >= 0 && fdt_node_is_enabled(fdt, cpu_offset))
> >                         fdt_parse_hart_id(fdt, cpu_offset, &val32);
> >         } else {
> >                 if (domain_offset == *cold_domain_offset)
> > @@ -414,6 +420,9 @@ static int __fdt_parse_domain(void *fdt, int domain_offset, void *opaque)
> >                 if (SBI_HARTMASK_MAX_BITS <= val32)
> >                         continue;
> >
> > +               if (!fdt_node_is_enabled(fdt, cpu_offset))
> > +                       continue;
> > +
> >                 val = fdt_getprop(fdt, cpu_offset, "opensbi-domain", &len);
> >                 if (!val || len < 4)
> >                         return SBI_EINVAL;
> > @@ -460,6 +469,9 @@ int fdt_domains_populate(void *fdt)
> >                 if (hartid != cold_hartid)
> >                         continue;
> >
> > +               if (!fdt_node_is_enabled(fdt, cpu_offset))
> > +                       continue;
> > +
> >                 val = fdt_getprop(fdt, cpu_offset, "opensbi-domain", &len);
> >                 if (val && len >= 4)
> >                         cold_domain_offset = fdt_node_offset_by_phandle(fdt,
> > diff --git a/lib/utils/fdt/fdt_fixup.c b/lib/utils/fdt/fdt_fixup.c
> > index a80bd82..d1050bb 100644
> > --- a/lib/utils/fdt/fdt_fixup.c
> > +++ b/lib/utils/fdt/fdt_fixup.c
> > @@ -38,6 +38,9 @@ void fdt_cpu_fixup(void *fdt)
> >                 if (err)
> >                         continue;
> >
> > +               if (!fdt_node_is_enabled(fdt, cpu_offset))
> > +                       continue;
> > +
> >                 /*
> >                  * Disable a HART DT node if one of the following is true:
> >                  * 1. The HART is not assigned to the current domain
> > diff --git a/lib/utils/fdt/fdt_helper.c b/lib/utils/fdt/fdt_helper.c
> > index 3b45ae8..5db3fbe 100644
> > --- a/lib/utils/fdt/fdt_helper.c
> > +++ b/lib/utils/fdt/fdt_helper.c
> > @@ -283,6 +283,9 @@ int fdt_parse_max_hart_id(void *fdt, u32 *max_hartid)
> >                 if (err)
> >                         continue;
> >
> > +               if (!fdt_node_is_enabled(fdt, cpu_offset))
> > +                       continue;
> > +
>
> This change is not needed because maximum hartid supported in a
> system remains the same irrespective of whether certain CPU are
> disabled/fused.

What should the fdt_parse_max_hart_id() function return? The highest hart-id
of the harts *used* in the system or *supported* by a system?

It makes sense to me to completely ignore the FDT nodes with status = "disabled"
except in the code handling interrupts-extended which leads to them (where they
should be skipped properly).

For an FPGA based system where there can be a different number of harts for each
build, it makes sense to maintain a base FDT with all harts disabled,
and selectively
enable just those present in the build. And then the disabled cores
are very much
not there at all.

>
> >                 if (hartid > *max_hartid)
> >                         *max_hartid = hartid;
> >         }
> > --
> > 2.36.1
> >
> >
> > --
> > opensbi mailing list
> > opensbi at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/opensbi
>
> Apart from the above minor comment, this looks good to me.
>
> Reviewed-by: Anup Patel <anup at brainfault.org>
>
> Regards,
> Anup

When we resolve the discussion above, I can send a v4 with correct
Reviewed-by: tags.

Thanks,
  Jan