[PATCH v2 2/3] lib: utils: check if CPU node is enabled
Xiang W
wxjstz at 126.com
Mon May 9 23:08:48 PDT 2022
在 2022-05-09星期一的 15:56 +0200,Jan Remeš写道:
> Ignore CPU nodes in FDT that are not enabled.
>
> Signed-off-by: Jan Remes <jan.remes at codasip.com>
Look good to me
Reviewed-by: Xiang W <wxjstz at 126.com>
> ---
> lib/utils/fdt/fdt_domain.c | 14 +++++++++++++-
> lib/utils/fdt/fdt_fixup.c | 3 +++
> lib/utils/fdt/fdt_helper.c | 6 ++++++
> lib/utils/irqchip/fdt_irqchip_imsic.c | 3 +++
> lib/utils/irqchip/fdt_irqchip_plic.c | 3 +++
> 5 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/lib/utils/fdt/fdt_domain.c b/lib/utils/fdt/fdt_domain.c
> index 676c757..bd0eec3 100644
> --- a/lib/utils/fdt/fdt_domain.c
> +++ b/lib/utils/fdt/fdt_domain.c
> @@ -165,6 +165,9 @@ void fdt_domain_fixup(void *fdt)
> if (err)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, doffset))
> + continue;
> +
> fdt_nop_property(fdt, doffset, "opensbi-domain");
> }
>
> @@ -308,6 +311,9 @@ static int __fdt_parse_domain(void *fdt, int
> domain_offset, void *opaque)
> if (err)
> return err;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> sbi_hartmask_set_hart(val32, mask);
> }
> }
> @@ -347,7 +353,7 @@ static int __fdt_parse_domain(void *fdt, int
> domain_offset, void *opaque)
> if (val && len >= 4) {
> cpu_offset = fdt_node_offset_by_phandle(fdt,
> fdt32_to_cpu(*val));
> - if (cpu_offset >= 0)
> + if (cpu_offset >= 0 && fdt_node_is_enabled(fdt, cpu_offset))
> fdt_parse_hart_id(fdt, cpu_offset, &val32);
> } else {
> if (domain_offset == *cold_domain_offset)
> @@ -414,6 +420,9 @@ static int __fdt_parse_domain(void *fdt, int
> domain_offset, void *opaque)
> if (SBI_HARTMASK_MAX_BITS <= val32)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> val = fdt_getprop(fdt, cpu_offset, "opensbi-domain", &len);
> if (!val || len < 4)
> return SBI_EINVAL;
> @@ -460,6 +469,9 @@ int fdt_domains_populate(void *fdt)
> if (hartid != cold_hartid)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> val = fdt_getprop(fdt, cpu_offset, "opensbi-domain", &len);
> if (val && len >= 4)
> cold_domain_offset = fdt_node_offset_by_phandle(fdt,
> diff --git a/lib/utils/fdt/fdt_fixup.c b/lib/utils/fdt/fdt_fixup.c
> index a80bd82..d1050bb 100644
> --- a/lib/utils/fdt/fdt_fixup.c
> +++ b/lib/utils/fdt/fdt_fixup.c
> @@ -38,6 +38,9 @@ void fdt_cpu_fixup(void *fdt)
> if (err)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> /*
> * Disable a HART DT node if one of the following is true:
> * 1. The HART is not assigned to the current domain
> diff --git a/lib/utils/fdt/fdt_helper.c b/lib/utils/fdt/fdt_helper.c
> index 3b45ae8..a2736af 100644
> --- a/lib/utils/fdt/fdt_helper.c
> +++ b/lib/utils/fdt/fdt_helper.c
> @@ -283,6 +283,9 @@ int fdt_parse_max_hart_id(void *fdt, u32 *max_hartid)
> if (err)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> if (hartid > *max_hartid)
> *max_hartid = hartid;
> }
> @@ -864,6 +867,9 @@ int fdt_parse_aclint_node(void *fdt, int
> nodeoffset, bool for_timer,
> if (rc)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> if (SBI_HARTMASK_MAX_BITS <= hartid)
> continue;
>
> diff --git a/lib/utils/irqchip/fdt_irqchip_imsic.c
> b/lib/utils/irqchip/fdt_irqchip_imsic.c
> index b6962be..bbd8b8d 100644
> --- a/lib/utils/irqchip/fdt_irqchip_imsic.c
> +++ b/lib/utils/irqchip/fdt_irqchip_imsic.c
> @@ -51,6 +51,9 @@ static int irqchip_imsic_update_hartid_table(void
> *fdt, int nodeoff,
> if (SBI_HARTMASK_MAX_BITS <= hartid)
> return SBI_EINVAL;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> switch (hwirq) {
> case IRQ_M_EXT:
> err = imsic_map_hartid_to_data(hartid, id, i / 2);
> diff --git a/lib/utils/irqchip/fdt_irqchip_plic.c
> b/lib/utils/irqchip/fdt_irqchip_plic.c
> index b2d2a1b..94ddd08 100644
> --- a/lib/utils/irqchip/fdt_irqchip_plic.c
> +++ b/lib/utils/irqchip/fdt_irqchip_plic.c
> @@ -64,6 +64,9 @@ static int irqchip_plic_update_hartid_table(void
> *fdt, int nodeoff,
> if (SBI_HARTMASK_MAX_BITS <= hartid)
> continue;
>
> + if (!fdt_node_is_enabled(fdt, cpu_offset))
> + continue;
> +
> plic_hartid2data[hartid] = pd;
> switch (hwirq) {
> case IRQ_M_EXT:
> --
> 2.35.1
>
More information about the opensbi
mailing list