[PATCH] Makefile: fix build with binutils 2.38
Alexandre Ghiti
alex at ghiti.fr
Sun Jan 30 23:43:51 PST 2022
Hi Aurélien,
On 1/28/22 18:33, Aurelien Jarno wrote:
> From version 2.38, binutils default to ISA spec version 20191213. This
> means that the csr read/write (csrr*/csrw*) instructions and fence.i
> instruction has separated from the `I` extension, become two standalone
> extensions: Zicsr and Zifencei. As the kernel uses those instruction,
> this causes the following build failure:
>
> CC lib/sbi/sbi_tlb.o
> <<BUILDDIR>>/lib/sbi/sbi_tlb.c: Assembler messages:
> <<BUILDDIR>>/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i'
> make: *** [Makefile:431: <<BUILDDIR>>/build/lib/sbi/sbi_tlb.o] Error 1
>
> The fix is to specify those extensions explicitly in -march. However as
> older binutils version do not support this, we first need to detect
> that.
>
> Signed-off-by: Aurelien Jarno <aurelien at aurel32.net>
> ---
> Makefile | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> Changes v1 -> v2 following the review from Bin Men (thanks)!
> - Fix typos
> - Use grep to detect missing extensions for consistency with CC_SUPPORT_SAVE_RESTORE
>
> diff --git a/Makefile b/Makefile
> index 062883e..717dffd 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -153,6 +153,9 @@ OPENSBI_LD_PIE := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) $(USE_LD_FLAG) -fP
> # Check whether the compiler supports -m(no-)save-restore
> CC_SUPPORT_SAVE_RESTORE := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -mno-save-restore -x c /dev/null -o /dev/null 2>&1 | grep "\-save\-restore" >/dev/null && echo n || echo y)
>
> +# Check whether the assembler and the compiler support the Zicsr and Zifencei extensions
> +CC_SUPPORT_ZICSR_ZIFENCEI := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -march=rv$(PLATFORM_RISCV_XLEN)imafd_zicsr_zifencei -x c /dev/null -o /dev/null 2>&1 | grep "zicsr\|zifencei" > /dev/null && echo n || echo y)
> +
> # Build Info:
> # OPENSBI_BUILD_TIME_STAMP -- the compilation time stamp
> # OPENSBI_BUILD_COMPILER_VERSION -- the compiler version info
> @@ -223,7 +226,11 @@ ifndef PLATFORM_RISCV_ABI
> endif
> ifndef PLATFORM_RISCV_ISA
> ifneq ($(PLATFORM_RISCV_TOOLCHAIN_DEFAULT), 1)
> - PLATFORM_RISCV_ISA = rv$(PLATFORM_RISCV_XLEN)imafdc
> + ifeq ($(CC_SUPPORT_ZICSR_ZIFENCEI), y)
> + PLATFORM_RISCV_ISA = rv$(PLATFORM_RISCV_XLEN)imafdc_zicsr_zifencei
> + else
> + PLATFORM_RISCV_ISA = rv$(PLATFORM_RISCV_XLEN)imafdc
> + endif
> else
> PLATFORM_RISCV_ISA = $(OPENSBI_CC_ISA)
> endif
You can add:
Tested-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
Thanks again for taking care of that,
Alex
More information about the opensbi
mailing list