[PATCH v5] lib: fix pointer of type 'void *' used in arithmetic
Jukka Laitinen
jukka.laitinen at iki.fi
Fri Jan 21 09:39:20 PST 2022
Anup Patel kirjoitti perjantai 21. tammikuuta 2022:
> On Wed, Jan 19, 2022 at 2:50 PM Jukka Laitinen <jukka.laitinen at iki.fi> wrote:
> >
> > Using "void *" in arithmetic causes errors with strict compiler settings:
> > "error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]"
> >
> > Avoid these by calculating on "char *" where 1-byte data size is assumed.
> >
> > Signed-off-by: Jukka Laitinen <jukkax at ssrc.tii.ae>
>
> Looks good to me.
>
> Reviewed-by: Anup Patel <anup at brainfault.org>
>
> Applied this patch to the riscv/opensbi repo.
>
> Thanks,
> Anup
Thank you all for reviews!
>
> > ---
> > include/sbi/sbi_scratch.h | 4 ++--
> > lib/sbi/sbi_fifo.c | 6 +++---
> > lib/sbi/sbi_string.c | 4 ++--
> > lib/utils/i2c/fdt_i2c_sifive.c | 4 ++--
> > lib/utils/irqchip/fdt_irqchip_plic.c | 2 +-
> > lib/utils/irqchip/plic.c | 8 ++++----
> > lib/utils/reset/fdt_reset_sunxi_wdt.c | 4 ++--
> > lib/utils/reset/fdt_reset_thead.c | 4 ++--
> > lib/utils/serial/gaisler-uart.c | 4 ++--
> > lib/utils/serial/shakti-uart.c | 4 ++--
> > lib/utils/serial/sifive-uart.c | 4 ++--
> > lib/utils/serial/uart8250.c | 4 ++--
> > lib/utils/timer/aclint_mtimer.c | 2 +-
> > 13 files changed, 27 insertions(+), 27 deletions(-)
> >
> > diff --git a/include/sbi/sbi_scratch.h b/include/sbi/sbi_scratch.h
> > index 186a40c..0c27307 100644
> > --- a/include/sbi/sbi_scratch.h
> > +++ b/include/sbi/sbi_scratch.h
> > @@ -104,11 +104,11 @@ unsigned long sbi_scratch_alloc_offset(unsigned long size);
> > void sbi_scratch_free_offset(unsigned long offset);
> >
> > /** Get pointer from offset in sbi_scratch */
> > -#define sbi_scratch_offset_ptr(scratch, offset) ((void *)scratch + (offset))
> > +#define sbi_scratch_offset_ptr(scratch, offset) (void *)((char *)(scratch) + (offset))
> >
> > /** Get pointer from offset in sbi_scratch for current HART */
> > #define sbi_scratch_thishart_offset_ptr(offset) \
> > - ((void *)sbi_scratch_thishart_ptr() + (offset))
> > + (void *)((char *)sbi_scratch_thishart_ptr() + (offset))
> >
> > /** HART id to scratch table */
> > extern struct sbi_scratch *hartid_to_scratch_table[];
> > diff --git a/lib/sbi/sbi_fifo.c b/lib/sbi/sbi_fifo.c
> > index 589cc18..68d6039 100644
> > --- a/lib/sbi/sbi_fifo.c
> > +++ b/lib/sbi/sbi_fifo.c
> > @@ -66,7 +66,7 @@ static inline void __sbi_fifo_enqueue(struct sbi_fifo *fifo, void *data)
> > if (head >= fifo->num_entries)
> > head = head - fifo->num_entries;
> >
> > - sbi_memcpy(fifo->queue + head * fifo->entry_size, data, fifo->entry_size);
> > + sbi_memcpy((char *)fifo->queue + head * fifo->entry_size, data, fifo->entry_size);
> >
> > fifo->avail++;
> > }
> > @@ -142,7 +142,7 @@ int sbi_fifo_inplace_update(struct sbi_fifo *fifo, void *in,
> > index = fifo->tail + i;
> > if (index >= fifo->num_entries)
> > index -= fifo->num_entries;
> > - entry = (void *)fifo->queue + (u32)index * fifo->entry_size;
> > + entry = (char *)fifo->queue + (u32)index * fifo->entry_size;
> > ret = fptr(in, entry);
> >
> > if (ret == SBI_FIFO_SKIP || ret == SBI_FIFO_UPDATED) {
> > @@ -184,7 +184,7 @@ int sbi_fifo_dequeue(struct sbi_fifo *fifo, void *data)
> > return SBI_ENOENT;
> > }
> >
> > - sbi_memcpy(data, fifo->queue + (u32)fifo->tail * fifo->entry_size,
> > + sbi_memcpy(data, (char *)fifo->queue + (u32)fifo->tail * fifo->entry_size,
> > fifo->entry_size);
> >
> > fifo->avail--;
> > diff --git a/lib/sbi/sbi_string.c b/lib/sbi/sbi_string.c
> > index c87bce9..c163f31 100644
> > --- a/lib/sbi/sbi_string.c
> > +++ b/lib/sbi/sbi_string.c
> > @@ -149,8 +149,8 @@ void *sbi_memmove(void *dest, const void *src, size_t count)
> > count--;
> > }
> > } else {
> > - temp1 = dest + count - 1;
> > - temp2 = src + count - 1;
> > + temp1 = (char *)dest + count - 1;
> > + temp2 = (char *)src + count - 1;
> >
> > while (count > 0) {
> > *temp1-- = *temp2--;
> > diff --git a/lib/utils/i2c/fdt_i2c_sifive.c b/lib/utils/i2c/fdt_i2c_sifive.c
> > index 871241a..195541c 100644
> > --- a/lib/utils/i2c/fdt_i2c_sifive.c
> > +++ b/lib/utils/i2c/fdt_i2c_sifive.c
> > @@ -56,13 +56,13 @@ extern struct fdt_i2c_adapter fdt_i2c_adapter_sifive;
> > static inline void sifive_i2c_setreg(struct sifive_i2c_adapter *adap,
> > uint8_t reg, uint8_t value)
> > {
> > - writel(value, (volatile void *)adap->addr + reg);
> > + writel(value, (volatile char *)adap->addr + reg);
> > }
> >
> > static inline uint8_t sifive_i2c_getreg(struct sifive_i2c_adapter *adap,
> > uint8_t reg)
> > {
> > - return readl((volatile void *)adap->addr + reg);
> > + return readl((volatile char *)adap->addr + reg);
> > }
> >
> > static int sifive_i2c_adapter_rxack(struct sifive_i2c_adapter *adap)
> > diff --git a/lib/utils/irqchip/fdt_irqchip_plic.c b/lib/utils/irqchip/fdt_irqchip_plic.c
> > index 8d375be..b2d2a1b 100644
> > --- a/lib/utils/irqchip/fdt_irqchip_plic.c
> > +++ b/lib/utils/irqchip/fdt_irqchip_plic.c
> > @@ -116,7 +116,7 @@ static int irqchip_plic_cold_init(void *fdt, int nodeoff,
> >
> > static void thead_plic_plat_init(struct plic_data *pd)
> > {
> > - writel_relaxed(BIT(0), (void *)pd->addr + THEAD_PLIC_CTRL_REG);
> > + writel_relaxed(BIT(0), (char *)pd->addr + THEAD_PLIC_CTRL_REG);
> > }
> >
> > static const struct fdt_match irqchip_plic_match[] = {
> > diff --git a/lib/utils/irqchip/plic.c b/lib/utils/irqchip/plic.c
> > index 7665c62..0f58f3e 100644
> > --- a/lib/utils/irqchip/plic.c
> > +++ b/lib/utils/irqchip/plic.c
> > @@ -23,7 +23,7 @@
> >
> > static void plic_set_priority(struct plic_data *plic, u32 source, u32 val)
> > {
> > - volatile void *plic_priority = (void *)plic->addr +
> > + volatile void *plic_priority = (char *)plic->addr +
> > PLIC_PRIORITY_BASE + 4 * source;
> > writel(val, plic_priority);
> > }
> > @@ -35,19 +35,19 @@ void plic_set_thresh(struct plic_data *plic, u32 cntxid, u32 val)
> > if (!plic)
> > return;
> >
> > - plic_thresh = (void *)plic->addr +
> > + plic_thresh = (char *)plic->addr +
> > PLIC_CONTEXT_BASE + PLIC_CONTEXT_STRIDE * cntxid;
> > writel(val, plic_thresh);
> > }
> >
> > void plic_set_ie(struct plic_data *plic, u32 cntxid, u32 word_index, u32 val)
> > {
> > - volatile void *plic_ie;
> > + volatile char *plic_ie;
> >
> > if (!plic)
> > return;
> >
> > - plic_ie = (void *)plic->addr +
> > + plic_ie = (char *)plic->addr +
> > PLIC_ENABLE_BASE + PLIC_ENABLE_STRIDE * cntxid;
> > writel(val, plic_ie + word_index * 4);
> > }
> > diff --git a/lib/utils/reset/fdt_reset_sunxi_wdt.c b/lib/utils/reset/fdt_reset_sunxi_wdt.c
> > index 6d1b5b7..446d32b 100644
> > --- a/lib/utils/reset/fdt_reset_sunxi_wdt.c
> > +++ b/lib/utils/reset/fdt_reset_sunxi_wdt.c
> > @@ -19,7 +19,7 @@
> >
> > #define WDT_MODE_REG 0x18
> >
> > -static volatile void *sunxi_wdt_base;
> > +static volatile char *sunxi_wdt_base;
> >
> > static int sunxi_wdt_system_reset_check(u32 type, u32 reason)
> > {
> > @@ -59,7 +59,7 @@ static int sunxi_wdt_reset_init(void *fdt, int nodeoff,
> > if (rc < 0 || !reg_addr)
> > return SBI_ENODEV;
> >
> > - sunxi_wdt_base = (volatile void *)(unsigned long)reg_addr;
> > + sunxi_wdt_base = (volatile char *)(unsigned long)reg_addr;
> >
> > sbi_system_reset_add_device(&sunxi_wdt_reset);
> >
> > diff --git a/lib/utils/reset/fdt_reset_thead.c b/lib/utils/reset/fdt_reset_thead.c
> > index d491687..e1d6885 100644
> > --- a/lib/utils/reset/fdt_reset_thead.c
> > +++ b/lib/utils/reset/fdt_reset_thead.c
> > @@ -59,7 +59,7 @@ extern void __thead_pre_start_warm(void);
> > static int thead_reset_init(void *fdt, int nodeoff,
> > const struct fdt_match *match)
> > {
> > - void *p;
> > + char *p;
> > const fdt64_t *val;
> > const fdt32_t *val_w;
> > int len, i;
> > @@ -91,7 +91,7 @@ static int thead_reset_init(void *fdt, int nodeoff,
> > /* Custom reset method for secondary harts */
> > val = fdt_getprop(fdt, nodeoff, "entry-reg", &len);
> > if (len > 0 && val) {
> > - p = (void *)(ulong)fdt64_to_cpu(*val);
> > + p = (char *)(ulong)fdt64_to_cpu(*val);
> >
> > val_w = fdt_getprop(fdt, nodeoff, "entry-cnt", &len);
> > if (len > 0 && val_w) {
> > diff --git a/lib/utils/serial/gaisler-uart.c b/lib/utils/serial/gaisler-uart.c
> > index 49298e9..5f30ee4 100644
> > --- a/lib/utils/serial/gaisler-uart.c
> > +++ b/lib/utils/serial/gaisler-uart.c
> > @@ -29,7 +29,7 @@
> >
> > /* clang-format on */
> >
> > -static volatile void *uart_base;
> > +static volatile char *uart_base;
> >
> > static u32 get_reg(u32 num)
> > {
> > @@ -67,7 +67,7 @@ int gaisler_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
> > {
> > u32 ctrl;
> >
> > - uart_base = (volatile void *)base;
> > + uart_base = (volatile char *)base;
> >
> > /* Configure baudrate */
> > if (in_freq)
> > diff --git a/lib/utils/serial/shakti-uart.c b/lib/utils/serial/shakti-uart.c
> > index e77a985..5f2fe75 100644
> > --- a/lib/utils/serial/shakti-uart.c
> > +++ b/lib/utils/serial/shakti-uart.c
> > @@ -21,7 +21,7 @@
> > #define UART_TX_FULL 0x2
> > #define UART_RX_FULL 0x8
> >
> > -static volatile void *uart_base;
> > +static volatile char *uart_base;
> >
> > static void shakti_uart_putc(char ch)
> > {
> > @@ -46,7 +46,7 @@ static struct sbi_console_device shakti_console = {
> >
> > int shakti_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
> > {
> > - uart_base = (volatile void *)base;
> > + uart_base = (volatile char *)base;
> > u16 baud = (u16)(in_freq/(16 * baudrate));
> > writew(baud, uart_base + REG_BAUD);
> >
> > diff --git a/lib/utils/serial/sifive-uart.c b/lib/utils/serial/sifive-uart.c
> > index 57d80fa..9478a77 100644
> > --- a/lib/utils/serial/sifive-uart.c
> > +++ b/lib/utils/serial/sifive-uart.c
> > @@ -29,7 +29,7 @@
> >
> > /* clang-format on */
> >
> > -static volatile void *uart_base;
> > +static volatile char *uart_base;
> > static u32 uart_in_freq;
> > static u32 uart_baudrate;
> >
> > @@ -90,7 +90,7 @@ static struct sbi_console_device sifive_console = {
> >
> > int sifive_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
> > {
> > - uart_base = (volatile void *)base;
> > + uart_base = (volatile char *)base;
> > uart_in_freq = in_freq;
> > uart_baudrate = baudrate;
> >
> > diff --git a/lib/utils/serial/uart8250.c b/lib/utils/serial/uart8250.c
> > index 1cf6624..142f8dc 100644
> > --- a/lib/utils/serial/uart8250.c
> > +++ b/lib/utils/serial/uart8250.c
> > @@ -39,7 +39,7 @@
> >
> > /* clang-format on */
> >
> > -static volatile void *uart8250_base;
> > +static volatile char *uart8250_base;
> > static u32 uart8250_in_freq;
> > static u32 uart8250_baudrate;
> > static u32 uart8250_reg_width;
> > @@ -95,7 +95,7 @@ int uart8250_init(unsigned long base, u32 in_freq, u32 baudrate, u32 reg_shift,
> > {
> > u16 bdiv;
> >
> > - uart8250_base = (volatile void *)base;
> > + uart8250_base = (volatile char *)base;
> > uart8250_reg_shift = reg_shift;
> > uart8250_reg_width = reg_width;
> > uart8250_in_freq = in_freq;
> > diff --git a/lib/utils/timer/aclint_mtimer.c b/lib/utils/timer/aclint_mtimer.c
> > index 62e87f7..2532b63 100644
> > --- a/lib/utils/timer/aclint_mtimer.c
> > +++ b/lib/utils/timer/aclint_mtimer.c
> > @@ -47,7 +47,7 @@ static u64 mtimer_time_rd32(volatile u64 *addr)
> > static void mtimer_time_wr32(bool timecmp, u64 value, volatile u64 *addr)
> > {
> > writel_relaxed((timecmp) ? -1U : 0U, (void *)(addr));
> > - writel_relaxed((u32)(value >> 32), (void *)(addr) + 0x04);
> > + writel_relaxed((u32)(value >> 32), (char *)(addr) + 0x04);
> > writel_relaxed((u32)value, (void *)(addr));
> > }
> >
> > --
> > 2.25.1
> >
> >
> > --
> > opensbi mailing list
> > opensbi at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/opensbi
>
More information about the opensbi
mailing list