[PATCH v5] lib: fix pointer of type 'void *' used in arithmetic
Xiang W
wxjstz at 126.com
Wed Jan 19 07:11:22 PST 2022
在 2022-01-19星期三的 11:20 +0200，Jukka Laitinen写道：
> Using "void *" in arithmetic causes errors with strict compiler
> settings:
> "error: pointer of type 'void *' used in arithmetic [-Werror=pointer-
> arith]"
>
> Avoid these by calculating on "char *" where 1-byte data size is
> assumed.
>
> Signed-off-by: Jukka Laitinen <jukkax at ssrc.tii.ae>
Look good to me.
Reviewed-by: Xiang W <wxjstz at 126.com>
> ---
> include/sbi/sbi_scratch.h | 4 ++--
> lib/sbi/sbi_fifo.c | 6 +++---
> lib/sbi/sbi_string.c | 4 ++--
> lib/utils/i2c/fdt_i2c_sifive.c | 4 ++--
> lib/utils/irqchip/fdt_irqchip_plic.c | 2 +-
> lib/utils/irqchip/plic.c | 8 ++++----
> lib/utils/reset/fdt_reset_sunxi_wdt.c | 4 ++--
> lib/utils/reset/fdt_reset_thead.c | 4 ++--
> lib/utils/serial/gaisler-uart.c | 4 ++--
> lib/utils/serial/shakti-uart.c | 4 ++--
> lib/utils/serial/sifive-uart.c | 4 ++--
> lib/utils/serial/uart8250.c | 4 ++--
> lib/utils/timer/aclint_mtimer.c | 2 +-
> 13 files changed, 27 insertions(+), 27 deletions(-)
>
> diff --git a/include/sbi/sbi_scratch.h b/include/sbi/sbi_scratch.h
> index 186a40c..0c27307 100644
> --- a/include/sbi/sbi_scratch.h
> +++ b/include/sbi/sbi_scratch.h
> @@ -104,11 +104,11 @@ unsigned long sbi_scratch_alloc_offset(unsigned
> long size);
> void sbi_scratch_free_offset(unsigned long offset);
>
> /** Get pointer from offset in sbi_scratch */
> -#define sbi_scratch_offset_ptr(scratch, offset) ((void
> *)scratch + (offset))
> +#define sbi_scratch_offset_ptr(scratch, offset) (void *)((char
> *)(scratch) + (offset))
>
> /** Get pointer from offset in sbi_scratch for current HART */
> #define sbi_scratch_thishart_offset_ptr(offset) \
> - ((void *)sbi_scratch_thishart_ptr() + (offset))
> + (void *)((char *)sbi_scratch_thishart_ptr() + (offset))
>
> /** HART id to scratch table */
> extern struct sbi_scratch *hartid_to_scratch_table[];
> diff --git a/lib/sbi/sbi_fifo.c b/lib/sbi/sbi_fifo.c
> index 589cc18..68d6039 100644
> --- a/lib/sbi/sbi_fifo.c
> +++ b/lib/sbi/sbi_fifo.c
> @@ -66,7 +66,7 @@ static inline void __sbi_fifo_enqueue(struct
> sbi_fifo *fifo, void *data)
> if (head >= fifo->num_entries)
> head = head - fifo->num_entries;
>
> - sbi_memcpy(fifo->queue + head * fifo->entry_size, data, fifo-
> >entry_size);
> + sbi_memcpy((char *)fifo->queue + head * fifo->entry_size,
> data, fifo->entry_size);
>
> fifo->avail++;
> }
> @@ -142,7 +142,7 @@ int sbi_fifo_inplace_update(struct sbi_fifo *fifo,
> void *in,
> index = fifo->tail + i;
> if (index >= fifo->num_entries)
> index -= fifo->num_entries;
> - entry = (void *)fifo->queue + (u32)index * fifo-
> >entry_size;
> + entry = (char *)fifo->queue + (u32)index * fifo-
> >entry_size;
> ret = fptr(in, entry);
>
> if (ret == SBI_FIFO_SKIP || ret == SBI_FIFO_UPDATED) {
> @@ -184,7 +184,7 @@ int sbi_fifo_dequeue(struct sbi_fifo *fifo, void
> *data)
> return SBI_ENOENT;
> }
>
> - sbi_memcpy(data, fifo->queue + (u32)fifo->tail * fifo-
> >entry_size,
> + sbi_memcpy(data, (char *)fifo->queue + (u32)fifo->tail * fifo-
> >entry_size,
> fifo->entry_size);
>
> fifo->avail--;
> diff --git a/lib/sbi/sbi_string.c b/lib/sbi/sbi_string.c
> index c87bce9..c163f31 100644
> --- a/lib/sbi/sbi_string.c
> +++ b/lib/sbi/sbi_string.c
> @@ -149,8 +149,8 @@ void *sbi_memmove(void *dest, const void *src,
> size_t count)
> count--;
> }
> } else {
> - temp1 = dest + count - 1;
> - temp2 = src + count - 1;
> + temp1 = (char *)dest + count - 1;
> + temp2 = (char *)src + count - 1;
>
> while (count > 0) {
> *temp1-- = *temp2--;
> diff --git a/lib/utils/i2c/fdt_i2c_sifive.c
> b/lib/utils/i2c/fdt_i2c_sifive.c
> index 871241a..195541c 100644
> --- a/lib/utils/i2c/fdt_i2c_sifive.c
> +++ b/lib/utils/i2c/fdt_i2c_sifive.c
> @@ -56,13 +56,13 @@ extern struct fdt_i2c_adapter
> fdt_i2c_adapter_sifive;
> static inline void sifive_i2c_setreg(struct sifive_i2c_adapter *adap,
> uint8_t reg, uint8_t value)
> {
> - writel(value, (volatile void *)adap->addr + reg);
> + writel(value, (volatile char *)adap->addr + reg);
> }
>
> static inline uint8_t sifive_i2c_getreg(struct sifive_i2c_adapter
> *adap,
> uint8_t reg)
> {
> - return readl((volatile void *)adap->addr + reg);
> + return readl((volatile char *)adap->addr + reg);
> }
>
> static int sifive_i2c_adapter_rxack(struct sifive_i2c_adapter *adap)
> diff --git a/lib/utils/irqchip/fdt_irqchip_plic.c
> b/lib/utils/irqchip/fdt_irqchip_plic.c
> index 8d375be..b2d2a1b 100644
> --- a/lib/utils/irqchip/fdt_irqchip_plic.c
> +++ b/lib/utils/irqchip/fdt_irqchip_plic.c
> @@ -116,7 +116,7 @@ static int irqchip_plic_cold_init(void *fdt, int
> nodeoff,
>
> static void thead_plic_plat_init(struct plic_data *pd)
> {
> - writel_relaxed(BIT(0), (void *)pd->addr +
> THEAD_PLIC_CTRL_REG);
> + writel_relaxed(BIT(0), (char *)pd->addr +
> THEAD_PLIC_CTRL_REG);
> }
>
> static const struct fdt_match irqchip_plic_match[] = {
> diff --git a/lib/utils/irqchip/plic.c b/lib/utils/irqchip/plic.c
> index 7665c62..0f58f3e 100644
> --- a/lib/utils/irqchip/plic.c
> +++ b/lib/utils/irqchip/plic.c
> @@ -23,7 +23,7 @@
>
> static void plic_set_priority(struct plic_data *plic, u32 source, u32
> val)
> {
> - volatile void *plic_priority = (void *)plic->addr +
> + volatile void *plic_priority = (char *)plic->addr +
> PLIC_PRIORITY_BASE + 4 * source;
> writel(val, plic_priority);
> }
> @@ -35,19 +35,19 @@ void plic_set_thresh(struct plic_data *plic, u32
> cntxid, u32 val)
> if (!plic)
> return;
>
> - plic_thresh = (void *)plic->addr +
> + plic_thresh = (char *)plic->addr +
> PLIC_CONTEXT_BASE + PLIC_CONTEXT_STRIDE *
> cntxid;
> writel(val, plic_thresh);
> }
>
> void plic_set_ie(struct plic_data *plic, u32 cntxid, u32 word_index,
> u32 val)
> {
> - volatile void *plic_ie;
> + volatile char *plic_ie;
>
> if (!plic)
> return;
>
> - plic_ie = (void *)plic->addr +
> + plic_ie = (char *)plic->addr +
> PLIC_ENABLE_BASE + PLIC_ENABLE_STRIDE * cntxid;
> writel(val, plic_ie + word_index * 4);
> }
> diff --git a/lib/utils/reset/fdt_reset_sunxi_wdt.c
> b/lib/utils/reset/fdt_reset_sunxi_wdt.c
> index 6d1b5b7..446d32b 100644
> --- a/lib/utils/reset/fdt_reset_sunxi_wdt.c
> +++ b/lib/utils/reset/fdt_reset_sunxi_wdt.c
> @@ -19,7 +19,7 @@
>
> #define WDT_MODE_REG 0x18
>
> -static volatile void *sunxi_wdt_base;
> +static volatile char *sunxi_wdt_base;
>
> static int sunxi_wdt_system_reset_check(u32 type, u32 reason)
> {
> @@ -59,7 +59,7 @@ static int sunxi_wdt_reset_init(void *fdt, int
> nodeoff,
> if (rc < 0 || !reg_addr)
> return SBI_ENODEV;
>
> - sunxi_wdt_base = (volatile void *)(unsigned long)reg_addr;
> + sunxi_wdt_base = (volatile char *)(unsigned long)reg_addr;
>
> sbi_system_reset_add_device(&sunxi_wdt_reset);
>
> diff --git a/lib/utils/reset/fdt_reset_thead.c
> b/lib/utils/reset/fdt_reset_thead.c
> index d491687..e1d6885 100644
> --- a/lib/utils/reset/fdt_reset_thead.c
> +++ b/lib/utils/reset/fdt_reset_thead.c
> @@ -59,7 +59,7 @@ extern void __thead_pre_start_warm(void);
> static int thead_reset_init(void *fdt, int nodeoff,
> const struct fdt_match *match)
> {
> - void *p;
> + char *p;
> const fdt64_t *val;
> const fdt32_t *val_w;
> int len, i;
> @@ -91,7 +91,7 @@ static int thead_reset_init(void *fdt, int nodeoff,
> /* Custom reset method for secondary harts */
> val = fdt_getprop(fdt, nodeoff, "entry-reg", &len);
> if (len > 0 && val) {
> - p = (void *)(ulong)fdt64_to_cpu(*val);
> + p = (char *)(ulong)fdt64_to_cpu(*val);
>
> val_w = fdt_getprop(fdt, nodeoff, "entry-cnt", &len);
> if (len > 0 && val_w) {
> diff --git a/lib/utils/serial/gaisler-uart.c
> b/lib/utils/serial/gaisler-uart.c
> index 49298e9..5f30ee4 100644
> --- a/lib/utils/serial/gaisler-uart.c
> +++ b/lib/utils/serial/gaisler-uart.c
> @@ -29,7 +29,7 @@
>
> /* clang-format on */
>
> -static volatile void *uart_base;
> +static volatile char *uart_base;
>
> static u32 get_reg(u32 num)
> {
> @@ -67,7 +67,7 @@ int gaisler_uart_init(unsigned long base, u32
> in_freq, u32 baudrate)
> {
> u32 ctrl;
>
> - uart_base = (volatile void *)base;
> + uart_base = (volatile char *)base;
>
> /* Configure baudrate */
> if (in_freq)
> diff --git a/lib/utils/serial/shakti-uart.c b/lib/utils/serial/shakti-
> uart.c
> index e77a985..5f2fe75 100644
> --- a/lib/utils/serial/shakti-uart.c
> +++ b/lib/utils/serial/shakti-uart.c
> @@ -21,7 +21,7 @@
> #define UART_TX_FULL 0x2
> #define UART_RX_FULL 0x8
>
> -static volatile void *uart_base;
> +static volatile char *uart_base;
>
> static void shakti_uart_putc(char ch)
> {
> @@ -46,7 +46,7 @@ static struct sbi_console_device shakti_console = {
>
> int shakti_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
> {
> - uart_base = (volatile void *)base;
> + uart_base = (volatile char *)base;
> u16 baud = (u16)(in_freq/(16 * baudrate));
> writew(baud, uart_base + REG_BAUD);
>
> diff --git a/lib/utils/serial/sifive-uart.c b/lib/utils/serial/sifive-
> uart.c
> index 57d80fa..9478a77 100644
> --- a/lib/utils/serial/sifive-uart.c
> +++ b/lib/utils/serial/sifive-uart.c
> @@ -29,7 +29,7 @@
>
> /* clang-format on */
>
> -static volatile void *uart_base;
> +static volatile char *uart_base;
> static u32 uart_in_freq;
> static u32 uart_baudrate;
>
> @@ -90,7 +90,7 @@ static struct sbi_console_device sifive_console = {
>
> int sifive_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
> {
> - uart_base = (volatile void *)base;
> + uart_base = (volatile char *)base;
> uart_in_freq = in_freq;
> uart_baudrate = baudrate;
>
> diff --git a/lib/utils/serial/uart8250.c b/lib/utils/serial/uart8250.c
> index 1cf6624..142f8dc 100644
> --- a/lib/utils/serial/uart8250.c
> +++ b/lib/utils/serial/uart8250.c
> @@ -39,7 +39,7 @@
>
> /* clang-format on */
>
> -static volatile void *uart8250_base;
> +static volatile char *uart8250_base;
> static u32 uart8250_in_freq;
> static u32 uart8250_baudrate;
> static u32 uart8250_reg_width;
> @@ -95,7 +95,7 @@ int uart8250_init(unsigned long base, u32 in_freq,
> u32 baudrate, u32 reg_shift,
> {
> u16 bdiv;
>
> - uart8250_base = (volatile void *)base;
> + uart8250_base = (volatile char *)base;
> uart8250_reg_shift = reg_shift;
> uart8250_reg_width = reg_width;
> uart8250_in_freq = in_freq;
> diff --git a/lib/utils/timer/aclint_mtimer.c
> b/lib/utils/timer/aclint_mtimer.c
> index 62e87f7..2532b63 100644
> --- a/lib/utils/timer/aclint_mtimer.c
> +++ b/lib/utils/timer/aclint_mtimer.c
> @@ -47,7 +47,7 @@ static u64 mtimer_time_rd32(volatile u64 *addr)
> static void mtimer_time_wr32(bool timecmp, u64 value, volatile u64
> *addr)
> {
> writel_relaxed((timecmp) ? -1U : 0U, (void *)(addr));
> - writel_relaxed((u32)(value >> 32), (void *)(addr) + 0x04);
> + writel_relaxed((u32)(value >> 32), (char *)(addr) + 0x04);
> writel_relaxed((u32)value, (void *)(addr));
> }
>
> --
> 2.25.1
>
>
More information about the opensbi
mailing list