[PATCH v4] lib: fix pointer of type 'void *' used in arithmetic
Jukka Laitinen
jukka.laitinen at iki.fi
Thu Jan 13 04:55:25 PST 2022
Using "void *" in arithmetic causes errors with strict compiler settings:
"error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]"
Avoid these by calculating on "char *" where 1-byte data size is assumed.
Signed-off-by: Jukka Laitinen <jukkax at ssrc.tii.ae>
---
include/sbi/sbi_scratch.h | 4 ++--
lib/sbi/sbi_fifo.c | 6 +++---
lib/sbi/sbi_string.c | 4 ++--
lib/utils/i2c/fdt_i2c_sifive.c | 4 ++--
lib/utils/irqchip/fdt_irqchip_plic.c | 2 +-
lib/utils/irqchip/plic.c | 8 ++++----
lib/utils/reset/fdt_reset_sunxi_wdt.c | 4 ++--
lib/utils/reset/fdt_reset_thead.c | 4 ++--
lib/utils/serial/gaisler-uart.c | 4 ++--
lib/utils/serial/shakti-uart.c | 4 ++--
lib/utils/serial/sifive-uart.c | 4 ++--
lib/utils/serial/uart8250.c | 4 ++--
lib/utils/timer/aclint_mtimer.c | 2 +-
13 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/include/sbi/sbi_scratch.h b/include/sbi/sbi_scratch.h
index 186a40c..0c27307 100644
--- a/include/sbi/sbi_scratch.h
+++ b/include/sbi/sbi_scratch.h
@@ -104,11 +104,11 @@ unsigned long sbi_scratch_alloc_offset(unsigned long size);
void sbi_scratch_free_offset(unsigned long offset);
/** Get pointer from offset in sbi_scratch */
-#define sbi_scratch_offset_ptr(scratch, offset) ((void *)scratch + (offset))
+#define sbi_scratch_offset_ptr(scratch, offset) (void *)((char *)(scratch) + (offset))
/** Get pointer from offset in sbi_scratch for current HART */
#define sbi_scratch_thishart_offset_ptr(offset) \
- ((void *)sbi_scratch_thishart_ptr() + (offset))
+ (void *)((char *)sbi_scratch_thishart_ptr() + (offset))
/** HART id to scratch table */
extern struct sbi_scratch *hartid_to_scratch_table[];
diff --git a/lib/sbi/sbi_fifo.c b/lib/sbi/sbi_fifo.c
index 589cc18..68d6039 100644
--- a/lib/sbi/sbi_fifo.c
+++ b/lib/sbi/sbi_fifo.c
@@ -66,7 +66,7 @@ static inline void __sbi_fifo_enqueue(struct sbi_fifo *fifo, void *data)
if (head >= fifo->num_entries)
head = head - fifo->num_entries;
- sbi_memcpy(fifo->queue + head * fifo->entry_size, data, fifo->entry_size);
+ sbi_memcpy((char *)fifo->queue + head * fifo->entry_size, data, fifo->entry_size);
fifo->avail++;
}
@@ -142,7 +142,7 @@ int sbi_fifo_inplace_update(struct sbi_fifo *fifo, void *in,
index = fifo->tail + i;
if (index >= fifo->num_entries)
index -= fifo->num_entries;
- entry = (void *)fifo->queue + (u32)index * fifo->entry_size;
+ entry = (char *)fifo->queue + (u32)index * fifo->entry_size;
ret = fptr(in, entry);
if (ret == SBI_FIFO_SKIP || ret == SBI_FIFO_UPDATED) {
@@ -184,7 +184,7 @@ int sbi_fifo_dequeue(struct sbi_fifo *fifo, void *data)
return SBI_ENOENT;
}
- sbi_memcpy(data, fifo->queue + (u32)fifo->tail * fifo->entry_size,
+ sbi_memcpy(data, (char *)fifo->queue + (u32)fifo->tail * fifo->entry_size,
fifo->entry_size);
fifo->avail--;
diff --git a/lib/sbi/sbi_string.c b/lib/sbi/sbi_string.c
index c87bce9..c163f31 100644
--- a/lib/sbi/sbi_string.c
+++ b/lib/sbi/sbi_string.c
@@ -149,8 +149,8 @@ void *sbi_memmove(void *dest, const void *src, size_t count)
count--;
}
} else {
- temp1 = dest + count - 1;
- temp2 = src + count - 1;
+ temp1 = (char *)dest + count - 1;
+ temp2 = (char *)src + count - 1;
while (count > 0) {
*temp1-- = *temp2--;
diff --git a/lib/utils/i2c/fdt_i2c_sifive.c b/lib/utils/i2c/fdt_i2c_sifive.c
index 871241a..195541c 100644
--- a/lib/utils/i2c/fdt_i2c_sifive.c
+++ b/lib/utils/i2c/fdt_i2c_sifive.c
@@ -56,13 +56,13 @@ extern struct fdt_i2c_adapter fdt_i2c_adapter_sifive;
static inline void sifive_i2c_setreg(struct sifive_i2c_adapter *adap,
uint8_t reg, uint8_t value)
{
- writel(value, (volatile void *)adap->addr + reg);
+ writel(value, (volatile char *)adap->addr + reg);
}
static inline uint8_t sifive_i2c_getreg(struct sifive_i2c_adapter *adap,
uint8_t reg)
{
- return readl((volatile void *)adap->addr + reg);
+ return readl((volatile char *)adap->addr + reg);
}
static int sifive_i2c_adapter_rxack(struct sifive_i2c_adapter *adap)
diff --git a/lib/utils/irqchip/fdt_irqchip_plic.c b/lib/utils/irqchip/fdt_irqchip_plic.c
index 8d375be..b2d2a1b 100644
--- a/lib/utils/irqchip/fdt_irqchip_plic.c
+++ b/lib/utils/irqchip/fdt_irqchip_plic.c
@@ -116,7 +116,7 @@ static int irqchip_plic_cold_init(void *fdt, int nodeoff,
static void thead_plic_plat_init(struct plic_data *pd)
{
- writel_relaxed(BIT(0), (void *)pd->addr + THEAD_PLIC_CTRL_REG);
+ writel_relaxed(BIT(0), (char *)pd->addr + THEAD_PLIC_CTRL_REG);
}
static const struct fdt_match irqchip_plic_match[] = {
diff --git a/lib/utils/irqchip/plic.c b/lib/utils/irqchip/plic.c
index 7665c62..0f58f3e 100644
--- a/lib/utils/irqchip/plic.c
+++ b/lib/utils/irqchip/plic.c
@@ -23,7 +23,7 @@
static void plic_set_priority(struct plic_data *plic, u32 source, u32 val)
{
- volatile void *plic_priority = (void *)plic->addr +
+ volatile void *plic_priority = (char *)plic->addr +
PLIC_PRIORITY_BASE + 4 * source;
writel(val, plic_priority);
}
@@ -35,19 +35,19 @@ void plic_set_thresh(struct plic_data *plic, u32 cntxid, u32 val)
if (!plic)
return;
- plic_thresh = (void *)plic->addr +
+ plic_thresh = (char *)plic->addr +
PLIC_CONTEXT_BASE + PLIC_CONTEXT_STRIDE * cntxid;
writel(val, plic_thresh);
}
void plic_set_ie(struct plic_data *plic, u32 cntxid, u32 word_index, u32 val)
{
- volatile void *plic_ie;
+ volatile char *plic_ie;
if (!plic)
return;
- plic_ie = (void *)plic->addr +
+ plic_ie = (char *)plic->addr +
PLIC_ENABLE_BASE + PLIC_ENABLE_STRIDE * cntxid;
writel(val, plic_ie + word_index * 4);
}
diff --git a/lib/utils/reset/fdt_reset_sunxi_wdt.c b/lib/utils/reset/fdt_reset_sunxi_wdt.c
index 6d1b5b7..446d32b 100644
--- a/lib/utils/reset/fdt_reset_sunxi_wdt.c
+++ b/lib/utils/reset/fdt_reset_sunxi_wdt.c
@@ -19,7 +19,7 @@
#define WDT_MODE_REG 0x18
-static volatile void *sunxi_wdt_base;
+static volatile char *sunxi_wdt_base;
static int sunxi_wdt_system_reset_check(u32 type, u32 reason)
{
@@ -59,7 +59,7 @@ static int sunxi_wdt_reset_init(void *fdt, int nodeoff,
if (rc < 0 || !reg_addr)
return SBI_ENODEV;
- sunxi_wdt_base = (volatile void *)(unsigned long)reg_addr;
+ sunxi_wdt_base = (volatile char *)(unsigned long)reg_addr;
sbi_system_reset_add_device(&sunxi_wdt_reset);
diff --git a/lib/utils/reset/fdt_reset_thead.c b/lib/utils/reset/fdt_reset_thead.c
index d491687..def4997 100644
--- a/lib/utils/reset/fdt_reset_thead.c
+++ b/lib/utils/reset/fdt_reset_thead.c
@@ -59,7 +59,7 @@ extern void __thead_pre_start_warm(void);
static int thead_reset_init(void *fdt, int nodeoff,
const struct fdt_match *match)
{
- void *p;
+ char *p;
const fdt64_t *val;
const fdt32_t *val_w;
int len, i;
@@ -91,7 +91,7 @@ static int thead_reset_init(void *fdt, int nodeoff,
/* Custom reset method for secondary harts */
val = fdt_getprop(fdt, nodeoff, "entry-reg", &len);
if (len > 0 && val) {
- p = (void *)(ulong)fdt64_to_cpu(*val);
+ p = (char *)fdt64_to_cpu(*val);
val_w = fdt_getprop(fdt, nodeoff, "entry-cnt", &len);
if (len > 0 && val_w) {
diff --git a/lib/utils/serial/gaisler-uart.c b/lib/utils/serial/gaisler-uart.c
index 49298e9..5f30ee4 100644
--- a/lib/utils/serial/gaisler-uart.c
+++ b/lib/utils/serial/gaisler-uart.c
@@ -29,7 +29,7 @@
/* clang-format on */
-static volatile void *uart_base;
+static volatile char *uart_base;
static u32 get_reg(u32 num)
{
@@ -67,7 +67,7 @@ int gaisler_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
{
u32 ctrl;
- uart_base = (volatile void *)base;
+ uart_base = (volatile char *)base;
/* Configure baudrate */
if (in_freq)
diff --git a/lib/utils/serial/shakti-uart.c b/lib/utils/serial/shakti-uart.c
index e77a985..5f2fe75 100644
--- a/lib/utils/serial/shakti-uart.c
+++ b/lib/utils/serial/shakti-uart.c
@@ -21,7 +21,7 @@
#define UART_TX_FULL 0x2
#define UART_RX_FULL 0x8
-static volatile void *uart_base;
+static volatile char *uart_base;
static void shakti_uart_putc(char ch)
{
@@ -46,7 +46,7 @@ static struct sbi_console_device shakti_console = {
int shakti_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
{
- uart_base = (volatile void *)base;
+ uart_base = (volatile char *)base;
u16 baud = (u16)(in_freq/(16 * baudrate));
writew(baud, uart_base + REG_BAUD);
diff --git a/lib/utils/serial/sifive-uart.c b/lib/utils/serial/sifive-uart.c
index 57d80fa..9478a77 100644
--- a/lib/utils/serial/sifive-uart.c
+++ b/lib/utils/serial/sifive-uart.c
@@ -29,7 +29,7 @@
/* clang-format on */
-static volatile void *uart_base;
+static volatile char *uart_base;
static u32 uart_in_freq;
static u32 uart_baudrate;
@@ -90,7 +90,7 @@ static struct sbi_console_device sifive_console = {
int sifive_uart_init(unsigned long base, u32 in_freq, u32 baudrate)
{
- uart_base = (volatile void *)base;
+ uart_base = (volatile char *)base;
uart_in_freq = in_freq;
uart_baudrate = baudrate;
diff --git a/lib/utils/serial/uart8250.c b/lib/utils/serial/uart8250.c
index 1cf6624..142f8dc 100644
--- a/lib/utils/serial/uart8250.c
+++ b/lib/utils/serial/uart8250.c
@@ -39,7 +39,7 @@
/* clang-format on */
-static volatile void *uart8250_base;
+static volatile char *uart8250_base;
static u32 uart8250_in_freq;
static u32 uart8250_baudrate;
static u32 uart8250_reg_width;
@@ -95,7 +95,7 @@ int uart8250_init(unsigned long base, u32 in_freq, u32 baudrate, u32 reg_shift,
{
u16 bdiv;
- uart8250_base = (volatile void *)base;
+ uart8250_base = (volatile char *)base;
uart8250_reg_shift = reg_shift;
uart8250_reg_width = reg_width;
uart8250_in_freq = in_freq;
diff --git a/lib/utils/timer/aclint_mtimer.c b/lib/utils/timer/aclint_mtimer.c
index 62e87f7..2532b63 100644
--- a/lib/utils/timer/aclint_mtimer.c
+++ b/lib/utils/timer/aclint_mtimer.c
@@ -47,7 +47,7 @@ static u64 mtimer_time_rd32(volatile u64 *addr)
static void mtimer_time_wr32(bool timecmp, u64 value, volatile u64 *addr)
{
writel_relaxed((timecmp) ? -1U : 0U, (void *)(addr));
- writel_relaxed((u32)(value >> 32), (void *)(addr) + 0x04);
+ writel_relaxed((u32)(value >> 32), (char *)(addr) + 0x04);
writel_relaxed((u32)value, (void *)(addr));
}
--
2.25.1
More information about the opensbi
mailing list