[PATCH v1 2/3] lib: sbi: Disable interrupt during config matching

Atish Patra atishp at rivosinc.com
Fri Jan 7 10:54:08 PST 2022


PMU overflow interrupt should be disabled durinig initial configuration of
counters. They should be enabled while starting counters.

Fixes: 730f01bb41a6 ("lib: sbi: Support sscofpmf extension in OpenSBI")

Signed-off-by: Atish Patra <atishp at rivosinc.com>
---
 include/sbi/riscv_encoding.h |  3 ++-
 lib/sbi/sbi_pmu.c            | 10 +++++++---
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/include/sbi/riscv_encoding.h b/include/sbi/riscv_encoding.h
index 8a29f8e05c9a..ac8590d72e4f 100644
--- a/include/sbi/riscv_encoding.h
+++ b/include/sbi/riscv_encoding.h
@@ -181,13 +181,14 @@
 #define MHPMEVENT_VSINH			(_UL(1) << 59)
 #define MHPMEVENT_VUINH			(_UL(1) << 58)
 #else
-#define MHPMEVENTH_OF			(_UL(1) << 31)
+#define MHPMEVENTH_OF			(_ULL(1) << 31)
 #define MHPMEVENTH_MINH			(_ULL(1) << 30)
 #define MHPMEVENTH_SINH			(_ULL(1) << 29)
 #define MHPMEVENTH_UINH			(_ULL(1) << 28)
 #define MHPMEVENTH_VSINH		(_ULL(1) << 27)
 #define MHPMEVENTH_VUINH		(_ULL(1) << 26)
 
+#define MHPMEVENT_OF			(MHPMEVENTH_OF << 32)
 #define MHPMEVENT_MINH			(MHPMEVENTH_MINH << 32)
 #define MHPMEVENT_SINH			(MHPMEVENTH_SINH << 32)
 #define MHPMEVENT_UINH			(MHPMEVENTH_UINH << 32)
diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 376afec13491..a209c8e266d6 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -256,7 +256,7 @@ static int pmu_ctr_enable_irq_hw(int ctr_idx)
 
 #if __riscv_xlen == 32
 	mhpmevent_csr = CSR_MHPMEVENT3H  + ctr_idx - 3;
-	of_mask = ~MHPMEVENTH_OF;
+	of_mask = (uint32_t)~MHPMEVENTH_OF;
 #else
 	mhpmevent_csr = CSR_MHPMEVENT3 + ctr_idx - 3;
 	of_mask = ~MHPMEVENT_OF;
@@ -470,9 +470,13 @@ static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt, int ctr_idx,
 	if (!mhpmevent_val || ctr_idx < 3 || ctr_idx >= SBI_PMU_HW_CTR_MAX)
 		return SBI_EFAIL;
 
-	/* Always clear the OVF bit and inhibit countin of events in M-mode */
+	/**
+	 * Always set the OVF bit(disable interrupts) and inhibit counting of
+	 * events in M-mode. The OVF bit should be enabled during the start call.
+	 */
 	if (sbi_hart_has_feature(scratch, SBI_HART_HAS_SSCOFPMF))
-		mhpmevent_val = (mhpmevent_val & ~MHPMEVENT_SSCOF_MASK) | MHPMEVENT_MINH;
+		mhpmevent_val = (mhpmevent_val & ~MHPMEVENT_SSCOF_MASK) |
+				 MHPMEVENT_MINH | MHPMEVENT_OF;
 
 	/* Update the inhibit flags based on inhibit flags received from supervisor */
 	pmu_update_inhibit_flags(flags, &mhpmevent_val);
-- 
2.30.2




More information about the opensbi mailing list