[PATCH v2 2/3] lib: utils/timer: mtimer: add a quirk for lacking mtime register

[Xiang W]

在 2022-12-12星期一的 16:22 +0800，Icenowy Zheng写道：
> T-Head developers surely have a different understanding of time CSR and
> CLINT's mtime register with SiFive ones, that they did not implement
> the mtime register at all -- as shown in openC906 source code, their
> time CSR value is just exposed at the top of their processor IP block
> and expects an external continous counter, which makes it not
> overrideable, and thus mtime register is not implemented, even not for
> reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
> extended CSR, these systems still rely on the mtimecmp registers to
> generate timer interrupts. This makes it necessary to implement T-Head
> C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
> reading mtime register and falls back to default code that reads time
> CSR.
> 
> Add a quirk into MTIMER driver, which represents a mtime register is
> lacking and time CSR value should be used instead.
> 
> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
> ---
> Changes in v2:
> - Dropped has_mtime field in aclint_mtimer_data, use mtime_size = 0
>   (which is disallowed before) to mark absence of mtime.
> - Dropped the code that specially handle the existence of mtime when
>   registering memory ranges -- the function will just be a no-op when
>   size is 0.
> 
>  lib/utils/timer/aclint_mtimer.c    | 11 ++++++++---
>  lib/utils/timer/fdt_timer_mtimer.c | 30 ++++++++++++++++++++----------
>  2 files changed, 28 insertions(+), 13 deletions(-)
> 
> diff --git a/lib/utils/timer/aclint_mtimer.c b/lib/utils/timer/aclint_mtimer.c
> index 3f00c21..1846a9a 100644
> --- a/lib/utils/timer/aclint_mtimer.c
> +++ b/lib/utils/timer/aclint_mtimer.c
> @@ -149,10 +149,10 @@ int aclint_mtimer_cold_init(struct aclint_mtimer_data *mt,
>         int rc;
>  
>         /* Sanity checks */
> -       if (!mt || !mt->mtime_size ||
> +       if (!mt ||
>             (mt->hart_count && !mt->mtimecmp_size) ||
> -           (mt->mtime_addr & (ACLINT_MTIMER_ALIGN - 1)) ||
> -           (mt->mtime_size & (ACLINT_MTIMER_ALIGN - 1)) ||
> +           (mt->mtime_size && (mt->mtime_addr & (ACLINT_MTIMER_ALIGN - 1))) ||
typo.
mt->mtime_size should be mt->mtime_addr.

Regards,
Xiang W
> +           (mt->mtime_size && (mt->mtime_size & (ACLINT_MTIMER_ALIGN - 1))) ||
>             (mt->mtimecmp_addr & (ACLINT_MTIMER_ALIGN - 1)) ||
>             (mt->mtimecmp_size & (ACLINT_MTIMER_ALIGN - 1)) ||
>             (mt->first_hartid >= SBI_HARTMASK_MAX_BITS) ||
> @@ -178,6 +178,11 @@ int aclint_mtimer_cold_init(struct aclint_mtimer_data *mt,
>         for (i = 0; i < mt->hart_count; i++)
>                 mtimer_hartid2data[mt->first_hartid + i] = mt;
>  
> +       if (!mt->mtime_size) {
> +               /* Disable reading mtime when mtime is not available */
> +               mtimer.timer_value = NULL;
> +       }
> +
>         /* Add MTIMER regions to the root domain */
>         if (mt->mtime_addr == (mt->mtimecmp_addr + mt->mtimecmp_size)) {
>                 rc = sbi_domain_root_add_memrange(mt->mtimecmp_addr,
> diff --git a/lib/utils/timer/fdt_timer_mtimer.c b/lib/utils/timer/fdt_timer_mtimer.c
> index 7b8546b..a0adc70 100644
> --- a/lib/utils/timer/fdt_timer_mtimer.c
> +++ b/lib/utils/timer/fdt_timer_mtimer.c
> @@ -18,6 +18,7 @@
>  struct timer_mtimer_quirks {
>         unsigned int    mtime_offset;
>         bool            has_64bit_mmio;
> +       bool            without_mtime;
>  };
>  
>  static unsigned long mtimer_count = 0;
> @@ -53,12 +54,16 @@ static int timer_mtimer_cold_init(void *fdt, int nodeoff,
>                 /* Set CLINT addresses */
>                 mt->mtimecmp_addr = addr[0] + ACLINT_DEFAULT_MTIMECMP_OFFSET;
>                 mt->mtimecmp_size = ACLINT_DEFAULT_MTIMECMP_SIZE;
> -               mt->mtime_addr = addr[0] + ACLINT_DEFAULT_MTIME_OFFSET;
> -               mt->mtime_size = size[0] - mt->mtimecmp_size;
> -               /* Adjust MTIMER address and size for CLINT device */
> -               mt->mtime_addr += quirks->mtime_offset;
> +               if (!quirks->without_mtime) {
> +                       mt->mtime_addr = addr[0] + ACLINT_DEFAULT_MTIME_OFFSET;
> +                       mt->mtime_size = size[0] - mt->mtimecmp_size;
> +                       /* Adjust MTIMER address and size for CLINT device */
> +                       mt->mtime_addr += quirks->mtime_offset;
> +                       mt->mtime_size -= quirks->mtime_offset;
> +               } else {
> +                       mt->mtime_addr = mt->mtime_size = 0;
> +               }
>                 mt->mtimecmp_addr += quirks->mtime_offset;
> -               mt->mtime_size -= quirks->mtime_offset;
>                 /* Apply additional CLINT quirks */
>                 mt->has_64bit_mmio = quirks->has_64bit_mmio;
>         } else { /* RISC-V ACLINT MTIMER */
> @@ -70,12 +75,17 @@ static int timer_mtimer_cold_init(void *fdt, int nodeoff,
>         }
>  
>         /* Check if MTIMER device has shared MTIME address */
> -       mt->has_shared_mtime = false;
> -       for (i = 0; i < mtimer_count; i++) {
> -               if (mtimer[i].mtime_addr == mt->mtime_addr) {
> -                       mt->has_shared_mtime = true;
> -                       break;
> +       if (mt->mtime_size) {
> +               mt->has_shared_mtime = false;
> +               for (i = 0; i < mtimer_count; i++) {
> +                       if (mtimer[i].mtime_addr == mt->mtime_addr) {
> +                               mt->has_shared_mtime = true;
> +                               break;
> +                       }
>                 }
> +       } else {
> +               /* Assume shared time CSR */
> +               mt->has_shared_mtime = true;
>         }
>  
>         /* Initialize the MTIMER device */
> -- 
> 2.38.1
> 
>