[PATCH 1/4] lib: utils/i2c: Add generic I2C configuration library

[Xiang W]

在 2021-09-24星期五的 14:33 +0300，Nikita Shubin写道：
> From: Nikita Shubin <n.shubin at yadro.com>
> 
> Helper library to keep track of registered I2C adapters,
> identified by dts offset, basic send/read functions and
> adapter configuration (enable, set dividers, etc...).
> 
> Signed-off-by: Nikita Shubin <n.shubin at yadro.com>
> ---
>  include/sbi_utils/i2c/i2c.h |  65 +++++++++++++++++++++++
>  lib/utils/i2c/i2c.c         | 102
> ++++++++++++++++++++++++++++++++++++
>  lib/utils/i2c/objects.mk    |  10 ++++
>  3 files changed, 177 insertions(+)
>  create mode 100644 include/sbi_utils/i2c/i2c.h
>  create mode 100644 lib/utils/i2c/i2c.c
>  create mode 100644 lib/utils/i2c/objects.mk
> 
> diff --git a/include/sbi_utils/i2c/i2c.h
> b/include/sbi_utils/i2c/i2c.h
> new file mode 100644
> index 0000000..86dd582
> --- /dev/null
> +++ b/include/sbi_utils/i2c/i2c.h
> @@ -0,0 +1,65 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2021 YADRO
> + *
> + * Authors:
> + *   Nikita Shubin <nshubin at yadro.com>
> + */
> +
> +#ifndef __I2C_H__
> +#define __I2C_H__
> +
> +#include <sbi/sbi_types.h>
> +
> +/** Representation of a I2C adapter */
> +struct i2c_adapter {
I suggest adding an object sbi_dlist to form a linked list

> +       /** Pointer to I2C driver owning this I2C adapter */
> +       void *driver;
> +
> +       /** Uniquie ID of the I2C adapter assigned by the driver */
> +       int id;
> +
> +       /**
> +        * Configure I2C adapter
> +        *
> +        * Enable, set dividers, etc...
> +        *
> +        * @return 0 on success and negative error code on failure
> +        */
> +       int (*configure)(struct i2c_adapter *ia);
> +
> +       /**
> +        * Send byte to given address, register
> +        *
> +        * @return 0 on success and negative error code on failure
> +        */
> +       int (*send)(struct i2c_adapter *ia, uint8_t addr, uint8_t
> reg, uint8_t value);
> +
> +       /**
> +        * Read byte from given address, register
> +        *
> +        * @return 0 on success and negative error code on failure
> +        */
> +       int (*read)(struct i2c_adapter *ia, uint8_t addr, uint8_t
> reg, uint8_t *value);
> +};
> +
> +/** Find a registered I2C adapter */
> +struct i2c_adapter *i2c_adapter_find(int id);
> +
> +/** Register I2C adapter */
> +int i2c_adapter_add(struct i2c_adapter *ia);
> +
> +/** Un-register I2C adapter */
> +void i2c_adapter_remove(struct i2c_adapter *ia);
> +
> +/** Configure I2C adapter prior to send/read */
> +int i2c_adapter_configure(struct i2c_adapter *ia);
> +
> +/** Send to device on I2C adapter bus */
> +int i2c_adapter_send(struct i2c_adapter *ia, uint8_t addr, uint8_t
> reg, uint8_t value);
> +
> +/** Read from device on I2C adapter bus */
> +int i2c_adapter_read(struct i2c_adapter *ia, uint8_t addr, uint8_t
> reg, uint8_t *value);
> +
> +#endif
> diff --git a/lib/utils/i2c/i2c.c b/lib/utils/i2c/i2c.c
> new file mode 100644
> index 0000000..9bcb129
> --- /dev/null
> +++ b/lib/utils/i2c/i2c.c
> @@ -0,0 +1,102 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2021 YADRO
> + *
> + * Authors:
> + *   Nikita Shubin <nshubin at yadro.com>
> + *
> + * derivate: lib/utils/gpio/gpio.c
> + * Authors:
> + *   Anup Patel <anup.patel at wdc.com>
> + */
> +
> +#include <sbi/sbi_error.h>
> +#include <sbi_utils/i2c/i2c.h>
> +
> +#define I2C_ADAPTER_MAX                16
If it is implemented through a linked list, there will be no limit on
the number

Regards,
Xiang W
> +
> +static struct i2c_adapter *i2c_array[I2C_ADAPTER_MAX];
> +
> +struct i2c_adapter *i2c_adapter_find(int id)
> +{
> +       unsigned int i;
> +       struct i2c_adapter *ret = NULL;
> +
> +       for (i = 0; i < I2C_ADAPTER_MAX; i++) {
> +               if (i2c_array[i] && i2c_array[i]->id == id) {
> +                       ret = i2c_array[i];
> +                       break;
> +               }
> +       }
> +
> +       return ret;
> +}
> +
> +int i2c_adapter_add(struct i2c_adapter *ia)
> +{
> +       int i, ret = SBI_ENOSPC;
> +
> +       if (!ia)
> +               return SBI_EINVAL;
> +       if (i2c_adapter_find(ia->id))
> +               return SBI_EALREADY;
> +
> +       for (i = 0; i < I2C_ADAPTER_MAX; i++) {
> +               if (!i2c_array[i]) {
> +                       i2c_array[i] = ia;
> +                       ret = 0;
> +                       break;
> +               }
> +       }
> +
> +       return ret;
> +}
> +
> +void i2c_adapter_remove(struct i2c_adapter *ia)
> +{
> +       int i;
> +
> +       if (!ia)
> +               return;
> +
> +       for (i = 0; i < I2C_ADAPTER_MAX; i++) {
> +               if (i2c_array[i] == ia) {
> +                       i2c_array[i] = NULL;
> +                       break;
> +               }
> +       }
> +}
> +
> +int i2c_adapter_configure(struct i2c_adapter *ia)
> +{
> +       if (!ia)
> +               return SBI_EINVAL;
> +       if (!ia->configure)
> +               return 0;
> +
> +       return ia->configure(ia);
> +}
> +
> +int i2c_adapter_send(struct i2c_adapter *ia, uint8_t addr,
> +                    uint8_t reg, uint8_t value)
> +{
> +       if (!ia)
> +               return SBI_EINVAL;
> +       if (!ia->send)
> +               return SBI_ENOSYS;
> +
> +       return ia->send(ia, addr, reg, value);
> +}
> +
> +
> +int i2c_adapter_read(struct i2c_adapter *ia, uint8_t addr,
> +                    uint8_t reg, uint8_t *value)
> +{
> +       if (!ia)
> +               return SBI_EINVAL;
> +       if (!ia->read)
> +               return SBI_ENOSYS;
> +
> +       return ia->read(ia, addr, reg, value);
> +}
> diff --git a/lib/utils/i2c/objects.mk b/lib/utils/i2c/objects.mk
> new file mode 100644
> index 0000000..16a70da
> --- /dev/null
> +++ b/lib/utils/i2c/objects.mk
> @@ -0,0 +1,10 @@
> +#
> +# SPDX-License-Identifier: BSD-2-Clause
> +#
> +# Copyright (c) 2021 YADRO
> +#
> +# Authors:
> +#   Nikita Shubin <nshubin at yadro.com>
> +#
> +
> +libsbiutils-objs-y += i2c/i2c.o
> -- 
> 2.31.1
> 
>