[PATCH v3 3/6] lib: utils/i2c: Add generic I2C configuration library
Nikita Shubin
nikita.shubin at maquefel.me
Wed Nov 10 00:09:55 PST 2021
Hello Alexandre,
Thank you, i will fix all mentioned issues in v4 series.
On Wed, 10 Nov 2021 08:34:11 +0100
Alexandre Ghiti <alexandre.ghiti at canonical.com> wrote:
> On Tue, Nov 9, 2021 at 1:41 PM Nikita Shubin
> <nikita.shubin at maquefel.me> wrote:
> >
> > From: Nikita Shubin <n.shubin at yadro.com>
> >
> > Helper library to keep track of registered I2C adapters,
> > identified by dts offset, basic send/read functions and
> > adapter configuration (enable, set dividers, etc...).
> >
> > Signed-off-by: Nikita Shubin <n.shubin at yadro.com>
> > ---
> > v2->v3:
> > - dropped configure
> > ---
> > include/sbi_utils/i2c/i2c.h | 97
> > +++++++++++++++++++++++++++++++++++++ lib/utils/i2c/i2c.c |
> > 75 ++++++++++++++++++++++++++++ lib/utils/i2c/objects.mk | 10
> > ++++ 3 files changed, 182 insertions(+)
> > create mode 100644 include/sbi_utils/i2c/i2c.h
> > create mode 100644 lib/utils/i2c/i2c.c
> > create mode 100644 lib/utils/i2c/objects.mk
> >
> > diff --git a/include/sbi_utils/i2c/i2c.h
> > b/include/sbi_utils/i2c/i2c.h new file mode 100644
> > index 0000000..09e5f0e
> > --- /dev/null
> > +++ b/include/sbi_utils/i2c/i2c.h
> > @@ -0,0 +1,97 @@
> > +/*
> > + * SPDX-License-Identifier: BSD-2-Clause
> > + *
> > + * Copyright (c) 2021 YADRO
> > + *
> > + * Authors:
> > + * Nikita Shubin <nshubin at yadro.com>
> > + */
> > +
> > +#ifndef __I2C_H__
> > +#define __I2C_H__
> > +
> > +#include <sbi/sbi_types.h>
> > +#include <sbi/sbi_list.h>
> > +
> > +/** Representation of a I2C adapter */
> > +struct i2c_adapter {
> > + /** Pointer to I2C driver owning this I2C adapter */
> > + void *driver;
> > +
> > + /** Uniquie ID of the I2C adapter assigned by the driver */
> >
>
> Still this typo that comes from the GPIO file.
>
> > + int id;
> > +
> > + /**
> > + * Configure I2C adapter
> > + *
> > + * Enable, set dividers, etc...
> > + *
> > + * @return 0 on success and negative error code on failure
> > + */
> > + int (*configure)(struct i2c_adapter *ia);
>
> You drop this in a later patch, maybe you should just not introduce
> it here.
>
>
> > +
> > + /**
> > + * Send buffer to given address, register
> > + *
> > + * @return 0 on success and negative error code on failure
> > + */
> > + int (*write)(struct i2c_adapter *ia, uint8_t addr, uint8_t
> > reg,
> > + uint8_t *buffer, int len);
> > +
> > + /**
> > + * Read buffer from given address, register
> > + *
> > + * @return 0 on success and negative error code on failure
> > + */
> > + int (*read)(struct i2c_adapter *ia, uint8_t addr, uint8_t
> > reg,
> > + uint8_t *buffer, int len);
> > +
> > + /** List */
> > + struct sbi_dlist node;
> > +};
> > +
> > +static inline struct i2c_adapter *to_i2c_adapter(struct sbi_dlist
> > *node) +{
> > + return container_of(node, struct i2c_adapter, node);
> > +}
> > +
> > +/** Find a registered I2C adapter */
> > +struct i2c_adapter *i2c_adapter_find(int id);
> > +
> > +/** Register I2C adapter */
> > +int i2c_adapter_add(struct i2c_adapter *ia);
> > +
> > +/** Un-register I2C adapter */
> > +void i2c_adapter_remove(struct i2c_adapter *ia);
> > +
> > +/** Configure I2C adapter prior to send/read */
> > +int i2c_adapter_configure(struct i2c_adapter *ia);
> > +
> > +/** Send to device on I2C adapter bus */
> > +int i2c_adapter_write(struct i2c_adapter *ia, uint8_t addr,
> > uint8_t reg,
> > + uint8_t *buffer, int len);
> > +
> > +/** Read from device on I2C adapter bus */
> > +int i2c_adapter_read(struct i2c_adapter *ia, uint8_t addr, uint8_t
> > reg,
> > + uint8_t *buffer, int len);
> > +
> > +static inline int i2c_adapter_reg_write(struct i2c_adapter *ia,
> > uint8_t addr,
> > + uint8_t reg, uint8_t val)
> > +{
> > + return i2c_adapter_write(ia, addr, reg, &val, 1);
> > +}
> > +
> > +static inline int i2c_adapter_reg_read(struct i2c_adapter *ia,
> > uint8_t addr,
> > + uint8_t reg, uint8_t *val)
> > +{
> > + uint8_t buf;
> > + int ret = i2c_adapter_read(ia, addr, reg, &buf, 1);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + *val = buf;
> > + return 0;
> > +}
> > +
> > +#endif
> > diff --git a/lib/utils/i2c/i2c.c b/lib/utils/i2c/i2c.c
> > new file mode 100644
> > index 0000000..1f5072c
> > --- /dev/null
> > +++ b/lib/utils/i2c/i2c.c
> > @@ -0,0 +1,75 @@
> > +/*
> > + * SPDX-License-Identifier: BSD-2-Clause
> > + *
> > + * Copyright (c) 2021 YADRO
> > + *
> > + * Authors:
> > + * Nikita Shubin <nshubin at yadro.com>
> > + *
> > + * derivate: lib/utils/gpio/gpio.c
> > + * Authors:
> > + * Anup Patel <anup.patel at wdc.com>
> > + */
> > +
> > +#include <sbi/sbi_error.h>
> > +#include <sbi_utils/i2c/i2c.h>
> > +
> > +static SBI_LIST_HEAD(i2c_adapters_list);
> > +
> > +struct i2c_adapter *i2c_adapter_find(int id)
> > +{
> > + struct sbi_dlist *pos;
> > +
> > + sbi_list_for_each(pos, &(i2c_adapters_list)) {
> > + struct i2c_adapter *adap = to_i2c_adapter(pos);
> > +
> > + if (adap->id == id)
> > + return adap;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +int i2c_adapter_add(struct i2c_adapter *ia)
> > +{
> > + if (!ia)
> > + return SBI_EINVAL;
> > +
> > + if (i2c_adapter_find(ia->id))
> > + return SBI_EALREADY;
> > +
> > + sbi_list_add(&(ia->node), &(i2c_adapters_list));
> > +
> > + return 0;
> > +}
> > +
> > +void i2c_adapter_remove(struct i2c_adapter *ia)
> > +{
> > + if (!ia)
> > + return;
> > +
> > + sbi_list_del(&(ia->node));
> > +}
> > +
> > +int i2c_adapter_write(struct i2c_adapter *ia, uint8_t addr,
> > uint8_t reg,
> > + uint8_t *buffer, int len)
> > +{
> > + if (!ia)
> > + return SBI_EINVAL;
> > + if (!ia->write)
> > + return SBI_ENOSYS;
> > +
> > + return ia->write(ia, addr, reg, buffer, len);
> > +}
> > +
> > +
> > +int i2c_adapter_read(struct i2c_adapter *ia, uint8_t addr, uint8_t
> > reg,
> > + uint8_t *buffer, int len)
> > +{
> > + if (!ia)
> > + return SBI_EINVAL;
> > + if (!ia->read)
> > + return SBI_ENOSYS;
> > +
> > + return ia->read(ia, addr, reg, buffer, len);
> > +}
> > diff --git a/lib/utils/i2c/objects.mk b/lib/utils/i2c/objects.mk
> > new file mode 100644
> > index 0000000..16a70da
> > --- /dev/null
> > +++ b/lib/utils/i2c/objects.mk
> > @@ -0,0 +1,10 @@
> > +#
> > +# SPDX-License-Identifier: BSD-2-Clause
> > +#
> > +# Copyright (c) 2021 YADRO
> > +#
> > +# Authors:
> > +# Nikita Shubin <nshubin at yadro.com>
> > +#
> > +
> > +libsbiutils-objs-y += i2c/i2c.o
> > --
> > 2.31.1
> >
>
> Otherwise, this looks good to me:
>
> Reviewed-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
> Tested-by: Alexandre Ghiti <alexandre.ghiti at canonical.com>
>
> Thanks!
>
> Alex
More information about the opensbi
mailing list