[PATCH 3/3] platform: Remove sifive/fu540 platform
Anup Patel
Anup.Patel at wdc.com
Thu May 6 10:09:51 BST 2021
> -----Original Message-----
> From: Anup Patel
> Sent: 04 May 2021 09:13
> To: Bin Meng <bmeng.cn at gmail.com>; opensbi at lists.infradead.org; David
> Abdurachmanov <david.abdurachmanov at gmail.com>
> Subject: RE: [PATCH 3/3] platform: Remove sifive/fu540 platform
>
> +David
>
> > -----Original Message-----
> > From: Bin Meng <bmeng.cn at gmail.com>
> > Sent: 29 April 2021 15:46
> > To: Anup Patel <Anup.Patel at wdc.com>; opensbi at lists.infradead.org
> > Subject: [PATCH 3/3] platform: Remove sifive/fu540 platform
> >
> > Now that SiFive HiFive Unleashed board is using the generic platform
> > support in OpenSBI, let's remove the old non-generic one.
> >
> > Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>
> Looks good to me.
>
> Reviewed-by: Anup Patel <anup.patel at wdc.com>
Applied this patch to the riscv/opensbi repo
Regards,
Anup
>
> @David Abdurachmanov I hope this is okay ??
>
> Regards,
> Anup
>
> > ---
> >
> > platform/sifive/fu540/config.mk | 40 -------
> > platform/sifive/fu540/objects.mk | 10 --
> > platform/sifive/fu540/platform.c |
> > 175 -------------------------------
> > scripts/create-binary-archive.sh | 2 -
> > 4 files changed, 227 deletions(-)
> > delete mode 100644 platform/sifive/fu540/config.mk delete mode
> > 100644 platform/sifive/fu540/objects.mk delete mode 100644
> > platform/sifive/fu540/platform.c
> >
> > diff --git a/platform/sifive/fu540/config.mk
> > b/platform/sifive/fu540/config.mk deleted file mode 100644 index
> > 23169b1..0000000
> > --- a/platform/sifive/fu540/config.mk
> > +++ /dev/null
> > @@ -1,40 +0,0 @@
> > -#
> > -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019
> > Western Digital Corporation or its affiliates.
> > -#
> > -# Authors:
> > -# Atish Patra <atish.patra at wdc.com>
> > -#
> > -
> > -# Compiler flags
> > -platform-cppflags-y =
> > -platform-cflags-y =
> > -platform-asflags-y =
> > -platform-ldflags-y =
> > -
> > -# Command for platform specific "make run"
> > -platform-runcmd = qemu-system-riscv$(PLATFORM_RISCV_XLEN) -M
> sifive_u
> > -m 256M \
> > - -nographic -bios
> > $(build_dir)/platform/sifive/fu540/firmware/fw_payload.elf
> > -
> > -# Blobs to build
> > -FW_TEXT_START=0x80000000
> > -FW_DYNAMIC=y
> > -FW_JUMP=y
> > -ifeq ($(PLATFORM_RISCV_XLEN), 32)
> > - # This needs to be 4MB aligned for 32-bit system
> > - FW_JUMP_ADDR=0x80400000
> > -else
> > - # This needs to be 2MB aligned for 64-bit system
> > - FW_JUMP_ADDR=0x80200000
> > -endif
> > -FW_JUMP_FDT_ADDR=0x88000000
> > -FW_PAYLOAD=y
> > -ifeq ($(PLATFORM_RISCV_XLEN), 32)
> > - # This needs to be 4MB aligned for 32-bit system
> > - FW_PAYLOAD_OFFSET=0x400000
> > -else
> > - # This needs to be 2MB aligned for 64-bit system
> > - FW_PAYLOAD_OFFSET=0x200000
> > -endif
> > -FW_PAYLOAD_FDT_ADDR=0x88000000
> > diff --git a/platform/sifive/fu540/objects.mk
> > b/platform/sifive/fu540/objects.mk
> > deleted file mode 100644
> > index e0d0585..0000000
> > --- a/platform/sifive/fu540/objects.mk
> > +++ /dev/null
> > @@ -1,10 +0,0 @@
> > -#
> > -# SPDX-License-Identifier: BSD-2-Clause -# -# Copyright (c) 2019
> > Western Digital Corporation or its affiliates.
> > -#
> > -# Authors:
> > -# Atish Patra <atish.patra at wdc.com>
> > -#
> > -
> > -platform-objs-y += platform.o
> > diff --git a/platform/sifive/fu540/platform.c
> > b/platform/sifive/fu540/platform.c
> > deleted file mode 100644
> > index a17034d..0000000
> > --- a/platform/sifive/fu540/platform.c
> > +++ /dev/null
> > @@ -1,175 +0,0 @@
> > -/*
> > - * SPDX-License-Identifier: BSD-2-Clause
> > - *
> > - * Copyright (c) 2019 Western Digital Corporation or its affiliates.
> > - *
> > - * Authors:
> > - * Atish Patra <atish.patra at wdc.com>
> > - */
> > -
> > -#include <libfdt.h>
> > -#include <sbi/riscv_asm.h>
> > -#include <sbi/riscv_io.h>
> > -#include <sbi/riscv_encoding.h>
> > -#include <sbi/sbi_console.h>
> > -#include <sbi/sbi_const.h>
> > -#include <sbi/sbi_platform.h>
> > -#include <sbi_utils/fdt/fdt_fixup.h>
> > -#include <sbi_utils/irqchip/plic.h>
> > -#include <sbi_utils/serial/sifive-uart.h> -#include
> > <sbi_utils/sys/clint.h>
> > -
> > -/* clang-format off */
> > -
> > -#define FU540_HART_COUNT 5
> > -
> > -#define FU540_SYS_CLK 1000000000
> > -
> > -#define FU540_CLINT_ADDR 0x2000000
> > -
> > -#define FU540_PLIC_ADDR 0xc000000
> > -#define FU540_PLIC_NUM_SOURCES 0x35
> > -#define FU540_PLIC_NUM_PRIORITIES 7
> > -
> > -#define FU540_UART0_ADDR 0x10010000
> > -#define FU540_UART1_ADDR 0x10011000
> > -#define FU540_UART_BAUDRATE 115200
> > -
> > -/* PRCI clock related macros */
> > -//TODO: Do we need a separate driver for this ?
> > -#define FU540_PRCI_BASE_ADDR 0x10000000
> > -#define FU540_PRCI_CLKMUXSTATUSREG 0x002C
> > -#define FU540_PRCI_CLKMUX_STATUS_TLCLKSEL (0x1 << 1)
> > -
> > -/* Full tlb flush always */
> > -#define FU540_TLB_RANGE_FLUSH_LIMIT 0
> > -
> > -/* clang-format on */
> > -
> > -static struct plic_data plic = {
> > - .addr = FU540_PLIC_ADDR,
> > - .num_src = FU540_PLIC_NUM_SOURCES,
> > -};
> > -
> > -static struct clint_data clint = {
> > - .addr = FU540_CLINT_ADDR,
> > - .first_hartid = 0,
> > - .hart_count = FU540_HART_COUNT,
> > - .has_64bit_mmio = TRUE,
> > -};
> > -
> > -static void fu540_modify_dt(void *fdt) -{
> > - fdt_cpu_fixup(fdt);
> > -
> > - fdt_fixups(fdt);
> > -
> > - /*
> > - * SiFive Freedom U540 has an erratum that prevents S-mode
> > software
> > - * to access a PMP protected region using 1GB page table mapping,
> > so
> > - * always add the no-map attribute on this platform.
> > - */
> > - fdt_reserved_memory_nomap_fixup(fdt);
> > -}
> > -
> > -static int fu540_final_init(bool cold_boot) -{
> > - void *fdt;
> > -
> > - if (!cold_boot)
> > - return 0;
> > -
> > - fdt = sbi_scratch_thishart_arg1_ptr();
> > - fu540_modify_dt(fdt);
> > -
> > - return 0;
> > -}
> > -
> > -static int fu540_console_init(void)
> > -{
> > - unsigned long peri_in_freq;
> > -
> > - if (readl((volatile void *)FU540_PRCI_BASE_ADDR +
> > - FU540_PRCI_CLKMUXSTATUSREG) &
> > - FU540_PRCI_CLKMUX_STATUS_TLCLKSEL) {
> > - peri_in_freq = FU540_SYS_CLK;
> > - } else {
> > - peri_in_freq = FU540_SYS_CLK / 2;
> > - }
> > -
> > - return sifive_uart_init(FU540_UART0_ADDR, peri_in_freq,
> > - FU540_UART_BAUDRATE);
> > -}
> > -
> > -static int fu540_irqchip_init(bool cold_boot) -{
> > - int rc;
> > - u32 hartid = current_hartid();
> > -
> > - if (cold_boot) {
> > - rc = plic_cold_irqchip_init(&plic);
> > - if (rc)
> > - return rc;
> > - }
> > -
> > - return plic_warm_irqchip_init(&plic, (hartid) ? (2 * hartid - 1) : 0,
> > - (hartid) ? (2 * hartid) : -1);
> > -}
> > -
> > -static int fu540_ipi_init(bool cold_boot) -{
> > - int rc;
> > -
> > - if (cold_boot) {
> > - rc = clint_cold_ipi_init(&clint);
> > - if (rc)
> > - return rc;
> > - }
> > -
> > - return clint_warm_ipi_init();
> > -}
> > -
> > -static u64 fu540_get_tlbr_flush_limit(void) -{
> > - return FU540_TLB_RANGE_FLUSH_LIMIT;
> > -}
> > -
> > -static int fu540_timer_init(bool cold_boot) -{
> > - int rc;
> > -
> > - if (cold_boot) {
> > - rc = clint_cold_timer_init(&clint, NULL);
> > - if (rc)
> > - return rc;
> > - }
> > -
> > - return clint_warm_timer_init();
> > -}
> > -
> > -static u32 fu540_hart_index2id[FU540_HART_COUNT - 1] = {
> > - [0] = 1,
> > - [1] = 2,
> > - [2] = 3,
> > - [3] = 4,
> > -};
> > -
> > -const struct sbi_platform_operations platform_ops = {
> > - .final_init = fu540_final_init,
> > - .console_init = fu540_console_init,
> > - .irqchip_init = fu540_irqchip_init,
> > - .ipi_init = fu540_ipi_init,
> > - .get_tlbr_flush_limit = fu540_get_tlbr_flush_limit,
> > - .timer_init = fu540_timer_init,
> > -};
> > -
> > -const struct sbi_platform platform = {
> > - .opensbi_version = OPENSBI_VERSION,
> > - .platform_version = SBI_PLATFORM_VERSION(0x0, 0x01),
> > - .name = "SiFive Freedom U540",
> > - .features = SBI_PLATFORM_DEFAULT_FEATURES,
> > - .hart_count = (FU540_HART_COUNT - 1),
> > - .hart_index2id = fu540_hart_index2id,
> > - .hart_stack_size =
> > SBI_PLATFORM_DEFAULT_HART_STACK_SIZE,
> > - .platform_ops_addr = (unsigned long)&platform_ops
> > -};
> > diff --git a/scripts/create-binary-archive.sh
> > b/scripts/create-binary-archive.sh
> > index a8bd335..43c5452 100755
> > --- a/scripts/create-binary-archive.sh
> > +++ b/scripts/create-binary-archive.sh
> > @@ -95,12 +95,10 @@ build_opensbi() {
> > case "${BUILD_RISCV_XLEN}" in
> > 32)
> > # Setup 32-bit platform list
> > - BUILD_PLATFORM_SUBDIR=("sifive/fu540")
> > BUILD_PLATFORM_SUBDIR+=("generic")
> > ;;
> > 64)
> > # Setup 64-bit platform list
> > - BUILD_PLATFORM_SUBDIR=("sifive/fu540")
> > BUILD_PLATFORM_SUBDIR+=("nuclei/ux600")
> > BUILD_PLATFORM_SUBDIR+=("kendryte/k210")
> > BUILD_PLATFORM_SUBDIR+=("fpga/ariane")
> > --
> > 2.25.1
More information about the opensbi
mailing list