[PATCH v2 10/15] lib: sbi: Add PMU support
Xiang W
wxjstz at 126.com
Tue Jun 8 04:29:21 PDT 2021
在 2021-05-26星期三的 17:30 -0700，Atish Patra写道：
> RISC-V SBI v0.3 specification defined a PMU extension to
> configure/start/stop
> the hardware/firmware pmu events.
>
> Implement PMU support in OpenSBI library. The implementation is
> agnostic of
> event to counter mapping & mhpmevent value configuration. That means,
> it
> expects platform hooks will be used to set up the mapping and provide
> the mhpmevent value at runtime.
>
> Signed-off-by: Atish Patra <atish.patra at wdc.com>
> ---
> include/sbi/sbi_ecall_interface.h | 138 ++++++-
> include/sbi/sbi_error.h | 2 +
> include/sbi/sbi_pmu.h | 73 ++++
> lib/sbi/objects.mk | 1 +
> lib/sbi/sbi_init.c | 9 +
> lib/sbi/sbi_pmu.c | 600
> ++++++++++++++++++++++++++++++
> 6 files changed, 822 insertions(+), 1 deletion(-)
> create mode 100644 include/sbi/sbi_pmu.h
> create mode 100644 lib/sbi/sbi_pmu.c
>
> diff --git a/include/sbi/sbi_ecall_interface.h
> b/include/sbi/sbi_ecall_interface.h
> index 559a33e7ced0..8fc723bc212c 100644
> --- a/include/sbi/sbi_ecall_interface.h
> +++ b/include/sbi/sbi_ecall_interface.h
> @@ -28,6 +28,7 @@
> #define SBI_EXT_RFENCE 0x52464E43
> #define SBI_EXT_HSM 0x48534D
> #define SBI_EXT_SRST 0x53525354
> +#define SBI_EXT_PMU 0x504D55
>
> /* SBI function IDs for BASE extension*/
> #define SBI_EXT_BASE_GET_SPEC_VERSION 0x0
> @@ -91,6 +92,139 @@
> #define SBI_SRST_RESET_REASON_NONE 0x0
> #define SBI_SRST_RESET_REASON_SYSFAIL 0x1
>
> +/* SBI function IDs for PMU extension */
> +#define SBI_EXT_PMU_NUM_COUNTERS 0x0
> +#define SBI_EXT_PMU_COUNTER_GET_INFO 0x1
> +#define SBI_EXT_PMU_COUNTER_CFG_MATCH 0x2
> +#define SBI_EXT_PMU_COUNTER_START 0x3
> +#define SBI_EXT_PMU_COUNTER_STOP 0x4
> +#define SBI_EXT_PMU_COUNTER_FW_READ 0x5
> +
> +/** General pmu event codes specified in SBI PMU extension */
> +enum sbi_pmu_hw_generic_events_t {
> + SBI_PMU_HW_NO_EVENT = 0,
> + SBI_PMU_HW_CPU_CYCLES = 1,
> + SBI_PMU_HW_INSTRUCTIONS = 2,
> + SBI_PMU_HW_CACHE_REFERENCES = 3,
> + SBI_PMU_HW_CACHE_MISSES = 4,
> + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5,
> + SBI_PMU_HW_BRANCH_MISSES = 6,
> + SBI_PMU_HW_BUS_CYCLES = 7,
> + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8,
> + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9,
> + SBI_PMU_HW_REF_CPU_CYCLES = 10,
> +
> + SBI_PMU_HW_GENERAL_MAX,
> +};
> +
> +/**
> + * Generalized hardware cache events:
> + *
> + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
> + * { read, write, prefetch } x
> + * { accesses, misses }
> + */
> +enum sbi_pmu_hw_cache_id {
> + SBI_PMU_HW_CACHE_L1D = 0,
> + SBI_PMU_HW_CACHE_L1I = 1,
> + SBI_PMU_HW_CACHE_LL = 2,
> + SBI_PMU_HW_CACHE_DTLB = 3,
> + SBI_PMU_HW_CACHE_ITLB = 4,
> + SBI_PMU_HW_CACHE_BPU = 5,
> + SBI_PMU_HW_CACHE_NODE = 6,
> +
> + SBI_PMU_HW_CACHE_MAX,
> +};
> +
> +enum sbi_pmu_hw_cache_op_id {
> + SBI_PMU_HW_CACHE_OP_READ = 0,
> + SBI_PMU_HW_CACHE_OP_WRITE = 1,
> + SBI_PMU_HW_CACHE_OP_PREFETCH = 2,
> +
> + SBI_PMU_HW_CACHE_OP_MAX,
> +};
> +
> +enum sbi_pmu_hw_cache_op_result_id {
> + SBI_PMU_HW_CACHE_RESULT_ACCESS = 0,
> + SBI_PMU_HW_CACHE_RESULT_MISS = 1,
> +
> + SBI_PMU_HW_CACHE_RESULT_MAX,
> +};
> +
> +/**
> + * Special "firmware" events provided by the OpenSBI, even if the
> hardware
> + * does not support performance events. These events are encoded as
> a raw
> + * event type in Linux kernel perf framework.
> + */
> +enum sbi_pmu_fw_event_code_id {
> + SBI_PMU_FW_MISALIGNED_LOAD = 0,
> + SBI_PMU_FW_MISALIGNED_STORE = 1,
> + SBI_PMU_FW_ACCESS_LOAD = 2,
> + SBI_PMU_FW_ACCESS_STORE = 3,
> + SBI_PMU_FW_ILLEGAL_INSN = 4,
> + SBI_PMU_FW_SET_TIMER = 5,
> + SBI_PMU_FW_IPI_SENT = 6,
> + SBI_PMU_FW_IPI_RECVD = 7,
> + SBI_PMU_FW_FENCE_I_SENT = 8,
> + SBI_PMU_FW_FENCE_I_RECVD = 9,
> + SBI_PMU_FW_SFENCE_VMA_SENT = 10,
> + SBI_PMU_FW_SFENCE_VMA_RCVD = 11,
> + SBI_PMU_FW_SFENCE_VMA_ASID_SENT = 12,
> + SBI_PMU_FW_SFENCE_VMA_ASID_RCVD = 13,
> +
> + SBI_PMU_FW_HFENCE_GVMA_SENT = 14,
> + SBI_PMU_FW_HFENCE_GVMA_RCVD = 15,
> + SBI_PMU_FW_HFENCE_GVMA_VMID_SENT = 16,
> + SBI_PMU_FW_HFENCE_GVMA_VMID_RCVD = 17,
> +
> + SBI_PMU_FW_HFENCE_VVMA_SENT = 18,
> + SBI_PMU_FW_HFENCE_VVMA_RCVD = 19,
> + SBI_PMU_FW_HFENCE_VVMA_ASID_SENT = 20,
> + SBI_PMU_FW_HFENCE_VVMA_ASID_RCVD = 21,
> + SBI_PMU_FW_MAX,
> +};
> +
> +/** SBI PMU event idx type */
> +enum sbi_pmu_event_type_id {
> + SBI_PMU_EVENT_TYPE_HW = 0x0,
> + SBI_PMU_EVENT_TYPE_HW_CACHE = 0x1,
> + SBI_PMU_EVENT_TYPE_HW_RAW = 0x2,
> + SBI_PMU_EVENT_TYPE_FW = 0xf,
> + SBI_PMU_EVENT_TYPE_MAX,
> +};
> +
> +/** SBI PMU counter type */
> +enum sbi_pmu_ctr_type {
> + SBI_PMU_CTR_TYPE_HW = 0,
> + SBI_PMU_CTR_TYPE_FW,
> +};
> +
> +/* Helper macros to decode event idx */
> +#define SBI_PMU_EVENT_IDX_OFFSET 20
> +#define SBI_PMU_EVENT_IDX_MASK 0xFFFFF
> +#define SBI_PMU_EVENT_IDX_CODE_MASK 0xFFFF
> +#define SBI_PMU_EVENT_IDX_TYPE_MASK 0xF0000
> +#define SBI_PMU_EVENT_RAW_IDX 0x20000
> +
> +#define SBI_PMU_EVENT_IDX_INVALID 0xFFFFFFFF
> +
> +/* Flags defined for config matching function */
> +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0)
> +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1)
> +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2)
> +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 3)
> +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 4)
> +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5)
> +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 6)
> +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 7)
> +
> +/* Flags defined for counter start function */
> +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
> +
> +/* Flags defined for counter stop function */
> +#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
> +
> +/* SBI base specification related macros */
> #define SBI_SPEC_VERSION_MAJOR_OFFSET 24
> #define SBI_SPEC_VERSION_MAJOR_MASK 0x7f
> #define SBI_SPEC_VERSION_MINOR_MASK 0xffffff
> @@ -107,8 +241,10 @@
> #define SBI_ERR_DENIED -4
> #define SBI_ERR_INVALID_ADDRESS -5
> #define SBI_ERR_ALREADY_AVAILABLE -6
> +#define SBI_ERR_ALREADY_STARTED -7
> +#define SBI_ERR_ALREADY_STOPPED -8
>
> -#define
> SBI_LAST_ERR SBI_ERR_ALREADY_AVAILABLE
> +#define
> SBI_LAST_ERR SBI_ERR_ALREADY_STOPPED
>
> /* clang-format on */
>
> diff --git a/include/sbi/sbi_error.h b/include/sbi/sbi_error.h
> index 3655d122006b..dd65e14b6fcd 100644
> --- a/include/sbi/sbi_error.h
> +++ b/include/sbi/sbi_error.h
> @@ -21,6 +21,8 @@
> #define SBI_EDENIED SBI_ERR_DENIED
> #define SBI_EINVALID_ADDR SBI_ERR_INVALID_ADDRESS
> #define SBI_EALREADY SBI_ERR_ALREADY_AVAILABLE
> +#define SBI_EALREADY_STARTED SBI_ERR_ALREADY_STARTED
> +#define SBI_EALREADY_STOPPED SBI_ERR_ALREADY_STOPPED
>
> #define SBI_ENODEV -1000
> #define SBI_ENOSYS -1001
> diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
> new file mode 100644
> index 000000000000..b3010cc5c1ce
> --- /dev/null
> +++ b/include/sbi/sbi_pmu.h
> @@ -0,0 +1,73 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2021 Western Digital Corporation or its affiliates.
> + *
> + * Authors:
> + * Atish Patra <atish.patra at wdc.com>
> + */
> +
> +#ifndef __SBI_PMU_H__
> +#define __SBI_PMU_H__
> +
> +#include <sbi/sbi_types.h>
> +#include <sbi/sbi_hartmask.h>
> +#include <sbi/sbi_scratch.h>
> +#include <sbi/sbi_ecall_interface.h>
> +
> +/* Event related macros */
> +/* Maximum number of hardware events that can mapped by OpenSBI */
> +#define SBI_PMU_HW_EVENT_MAX 64
> +
> +/* Maximum number of firmware events that can mapped by OpenSBI */
> +#define SBI_PMU_FW_EVENT_MAX 32
> +
> +/* Counter related macros */
> +#define SBI_PMU_FW_CTR_MAX 16
> +#define SBI_PMU_HW_CTR_MAX 32
> +#define SBI_PMU_CTR_MAX (SBI_PMU_HW_CTR_MAX +
> SBI_PMU_FW_CTR_MAX)
> +
> +/** Initialize PMU */
> +int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot);
> +
> +/** Reset PMU during hart exit */
> +void sbi_pmu_exit(struct sbi_scratch *scratch);
> +
> +/**
> + * Add the hardware event to counter mapping information. This
> should be called
> + * from the platform code to update the mapping table.
> + * @param eidx_start Start of the event idx range for supported
> counters
> + * @param eidx_end End of the event idx range for supported
> counters
> + * @param cmap A bitmap representing counters supporting the
> event range
> + * @return 0 on success, error otherwise.
> + */
> +int sbi_pmu_add_hw_event_counter_map(u32 eidx_start, u32 eidx_end,
> u32 cmap);
> +
> +/**
> + * Add the raw hardware event selector and supported counter
> information. This
> + * should be called from the platform code to update the mapping
> table.
> + * @param info a pointer to the hardware event info
> + * @return 0 on success, error otherwise.
> + */
> +
> +int sbi_pmu_add_raw_event_counter_map(uint64_t select, u32 cmap);
> +
> +int sbi_pmu_ctr_read(uint32_t cidx, unsigned long *cval);
> +
> +int sbi_pmu_ctr_stop(unsigned long cidx_base, unsigned long
> cidx_mask,
> + unsigned long flag);
> +
> +int sbi_pmu_ctr_start(unsigned long cidx_base, unsigned long
> cidx_mask,
> + unsigned long flags, uint64_t ival);
> +
> +int sbi_pmu_ctr_get_info(uint32_t cidx, unsigned long *ctr_info);
> +
> +unsigned long sbi_pmu_num_ctr(void);
> +
> +int sbi_pmu_ctr_cfg_match(unsigned long cidx_base, unsigned long
> cidx_mask,
> + unsigned long flags, unsigned long
> event_idx,
> + uint64_t event_data);
> +
> +int sbi_pmu_ctr_incr_fw(enum sbi_pmu_fw_event_code_id fw_id);
> +
> +#endif
> diff --git a/lib/sbi/objects.mk b/lib/sbi/objects.mk
> index 6f2c06f5b501..d9068b707854 100644
> --- a/lib/sbi/objects.mk
> +++ b/lib/sbi/objects.mk
> @@ -33,6 +33,7 @@ libsbi-objs-y += sbi_init.o
> libsbi-objs-y += sbi_ipi.o
> libsbi-objs-y += sbi_misaligned_ldst.o
> libsbi-objs-y += sbi_platform.o
> +libsbi-objs-y += sbi_pmu.o
> libsbi-objs-y += sbi_scratch.o
> libsbi-objs-y += sbi_string.o
> libsbi-objs-y += sbi_system.o
> diff --git a/lib/sbi/sbi_init.c b/lib/sbi/sbi_init.c
> index 65af5705f484..143b98f93c02 100644
> --- a/lib/sbi/sbi_init.c
> +++ b/lib/sbi/sbi_init.c
> @@ -19,6 +19,7 @@
> #include <sbi/sbi_hsm.h>
> #include <sbi/sbi_ipi.h>
> #include <sbi/sbi_platform.h>
> +#include <sbi/sbi_pmu.h>
> #include <sbi/sbi_system.h>
> #include <sbi/sbi_string.h>
> #include <sbi/sbi_timer.h>
> @@ -252,6 +253,8 @@ static void __noreturn init_coldboot(struct
> sbi_scratch *scratch, u32 hartid)
> if (rc)
> sbi_hart_hang();
>
> + sbi_pmu_init(scratch, TRUE);
> +
> sbi_boot_print_banner(scratch);
>
> rc = sbi_platform_irqchip_init(plat, TRUE);
> @@ -353,6 +356,8 @@ static void init_warm_startup(struct sbi_scratch
> *scratch, u32 hartid)
> if (rc)
> sbi_hart_hang();
>
> + sbi_pmu_init(scratch, FALSE);
> +
> rc = sbi_platform_irqchip_init(plat, FALSE);
> if (rc)
> sbi_hart_hang();
> @@ -393,6 +398,8 @@ static void init_warm_resume(struct sbi_scratch
> *scratch)
> if (rc)
> sbi_hart_hang();
>
> + sbi_pmu_init(scratch, FALSE);
> +
> rc = sbi_hart_pmp_configure(scratch);
> if (rc)
> sbi_hart_hang();
> @@ -516,6 +523,8 @@ void __noreturn sbi_exit(struct sbi_scratch
> *scratch)
>
> sbi_platform_early_exit(plat);
>
> + sbi_pmu_exit(scratch);
> +
> sbi_timer_exit(scratch);
>
> sbi_ipi_exit(scratch);
> diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
> new file mode 100644
> index 000000000000..ed519dfcc860
> --- /dev/null
> +++ b/lib/sbi/sbi_pmu.c
> @@ -0,0 +1,600 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2021 Western Digital Corporation or its affiliates.
> + *
> + * Authors:
> + * Atish Patra <atish.patra at wdc.com>
> + */
> +
> +#include <sbi/riscv_asm.h>
> +#include <sbi/sbi_bitops.h>
> +#include <sbi/sbi_console.h>
> +#include <sbi/sbi_hart.h>
> +#include <sbi/sbi_platform.h>
> +#include <sbi/sbi_pmu.h>
> +#include <sbi/sbi_scratch.h>
> +#include <sbi/sbi_string.h>
> +
> +/** Information about hardware counters */
> +struct sbi_pmu_hw_event {
> + unsigned long counters;
> + unsigned long start_idx;
> + unsigned long end_idx;
> + /* Event selector value used only for raw events */
> + uint64_t select;
> +};
> +
> +/** Representation of a firmware event */
> +struct sbi_pmu_fw_event {
> +
> + /* Event associated with the particular counter */
> + unsigned long event_idx;
> +
> + /* Current value of the counter */
> + unsigned long curr_count;
> +
> + /* A flag indicating pmu event monitoring is started */
> + bool bStarted;
> +};
> +
> +/* Information about PMU counters as per SBI specification */
> +union sbi_pmu_ctr_info {
> + unsigned long value;
> + struct {
> + unsigned long csr:12;
> + unsigned long width:6;
> +#if __riscv_xlen == 32
> + unsigned long reserved:13;
> +#else
> + unsigned long reserved:45;
> +#endif
> + unsigned long type:1;
> + };
> +};
> +
> +/* Mapping between event range and possible counters */
> +static struct sbi_pmu_hw_event hw_event_map[SBI_PMU_HW_EVENT_MAX] =
> {0};
> +
> +/* counter to enabled event mapping */
> +static uint32_t
> active_events[SBI_HARTMASK_MAX_BITS][SBI_PMU_HW_CTR_MAX +
> SBI_PMU_FW_CTR_MAX];
> +
> +/* Contains all the information about firmwares events */
> +static struct sbi_pmu_fw_event
> fw_event_map[SBI_HARTMASK_MAX_BITS][SBI_PMU_FW_EVENT_MAX] = {0};
> +
> +/* Maximum number of hardware events available */
> +static uint32_t num_hw_events;
> +/* Maximum number of hardware counters available */
> +static uint32_t num_hw_ctrs;
> +
> +/* Maximum number of counters available */
> +static uint32_t total_ctrs;
> +
> +/* Helper macros to retrieve event idx and code type */
> +#define get_cidx_type(x) ((x & SBI_PMU_EVENT_IDX_TYPE_MASK) >> 16)
> +#define get_cidx_code(x) (x & SBI_PMU_EVENT_IDX_CODE_MASK)
> +
> +/**
> + * Perform a sanity check on event & counter mappings with event
> range overlap check
> + * @param evtA Pointer to the existing hw event structure
> + * @param evtB Pointer to the new hw event structure
> + *
> + * Return FALSE if the range doesn't overlap, TRUE otherwise
> + */
> +static bool pmu_event_range_overlap(struct sbi_pmu_hw_event *evtA,
> + struct sbi_pmu_hw_event *evtB)
> +{
> + /* check if the range of events overlap with a previous entry
> */
> + if (((evtA->end_idx < evtB->start_idx) && (evtA->end_idx <
> evtB->end_idx)) ||
> + ((evtA->start_idx > evtB->start_idx) && (evtA->start_idx >
> evtB->end_idx)))
> + return FALSE;
> + return TRUE;
> +}
> +
> +static bool pmu_event_select_overlap(struct sbi_pmu_hw_event *evt,
> + uint64_t select_val)
> +{
> +
> + if (evt->select == select_val)
> + return TRUE;
> +
> + return FALSE;
> +}
> +
> +static int pmu_ctr_validate(uint32_t cidx, uint32_t *event_idx_code)
> +{
> + uint32_t event_idx_val;
> + uint32_t event_idx_type;
> + u32 hartid = current_hartid();
> +
> + event_idx_val = active_events[hartid][cidx];
> +
> + if (cidx >= total_ctrs || (event_idx_val ==
> SBI_PMU_EVENT_IDX_INVALID))
> + return SBI_EINVAL;
> +
> + event_idx_type = get_cidx_type(event_idx_val);
> + if (event_idx_type >= SBI_PMU_EVENT_TYPE_MAX)
> + return SBI_EINVAL;
> +
> + *event_idx_code = get_cidx_code(event_idx_val);
> +
> + return event_idx_type;
> +}
> +
> +static int pmu_ctr_read_fw(uint32_t cidx, unsigned long *cval,
> + uint32_t fw_evt_code)
> +{
> + u32 hartid = current_hartid();
> + struct sbi_pmu_fw_event fevent;
> +
> + fevent = fw_event_map[hartid][fw_evt_code];
> + *cval = fevent.curr_count;
> +
> + return 0;
> +}
> +
> +/* Add a hardware counter read for completeness for future purpose
> */
> +static int pmu_ctr_read_hw(uint32_t cidx, uint64_t *cval)
> +{
> +#if __riscv_xlen == 32
> + uint32_t temp, temph = 0;
> +
> + temp = csr_read_num(CSR_MCYCLE + cidx);
> + temph = csr_read_num(CSR_MCYCLEH + cidx);
> + *cval = ((uint64_t)temph << 32) | temp;
The code for reading the timer is recommended to be changed to the
following to prevent large discrepancies in the reading of the counter
value
do {
temph = csr_read_num(CSR_MCYCLEH + cidx);
temp = csr_read_num(CSR_MCYCLE + cidx);
} while(temph != csr_read_num(CSR_MCYCLEH + cidx));
*cval = ((uint64_t)temph << 32) | temp;
Reviewed-by: Xiang W <wxjstz at 126.com>
> +#else
> + *cval = csr_read_num(CSR_MCYCLE + cidx);
> +#endif
> +
> + return 0;
> +}
> +
> +int sbi_pmu_ctr_read(uint32_t cidx, unsigned long *cval)
> +{
> + int event_idx_type;
> + uint32_t event_code;
> + uint64_t cval64;
> +
> + event_idx_type = pmu_ctr_validate(cidx, &event_code);
> + if (event_idx_type < 0)
> + return SBI_EINVAL;
> + else if (event_idx_type == SBI_PMU_EVENT_TYPE_FW)
> + pmu_ctr_read_fw(cidx, cval, event_code);
> + else
> + pmu_ctr_read_hw(cidx, &cval64);
> +
> + return 0;
> +}
> +
> +static int pmu_add_hw_event_map(u32 eidx_start, u32 eidx_end, u32
> cmap,
> + uint64_t select)
> +{
> + int i = 0;
> + bool is_overlap;
> + struct sbi_pmu_hw_event *event =
> &hw_event_map[num_hw_events];
> +
> + /* The first two counters are reserved by priv spec */
> + if ((eidx_start == SBI_PMU_HW_CPU_CYCLES && cmap != 0x1) ||
> + (eidx_start == SBI_PMU_HW_INSTRUCTIONS && cmap != 0x4) ||
> + (eidx_start > SBI_PMU_HW_INSTRUCTIONS && cmap < 0x08))
> + return SBI_EDENIED;
> +
> + if (num_hw_events >= SBI_PMU_HW_EVENT_MAX - 1) {
> + sbi_printf("Can not handle more than %d perf
> events\n",
> + SBI_PMU_HW_EVENT_MAX);
> + return SBI_EFAIL;
> + }
> +
> + event->start_idx = eidx_start;
> + event->end_idx = eidx_end;
> + event->counters = cmap;
> + event->select = select;
> +
> + /* Sanity check */
> + for (i = 0; i < num_hw_events; i++) {
> + if (eidx_start == SBI_PMU_EVENT_RAW_IDX)
> + /* All raw events have same event idx. Just do sanity
> check on select */
> + is_overlap =
> pmu_event_select_overlap(&hw_event_map[i], select);
> + else
> + is_overlap =
> pmu_event_range_overlap(&hw_event_map[i], event);
> + if (is_overlap)
> + return SBI_EINVALID_ADDR;
> + }
> + num_hw_events++;
> +
> + return 0;
> +}
> +
> +/**
> + * Logical counter ids are assigned to hardware counters are
> assigned consecutively.
> + * E.g. counter0 must count MCYCLE where counter2 must count
> minstret. Similarly,
> + * counterX will mhpmcounterX.
> + */
> +int sbi_pmu_add_hw_event_counter_map(u32 eidx_start, u32 eidx_end,
> u32 cmap)
> +{
> + if ((eidx_start > eidx_end) || eidx_start ==
> SBI_PMU_EVENT_RAW_IDX ||
> + eidx_end == SBI_PMU_EVENT_RAW_IDX)
> + return SBI_EINVAL;
> +
> + return pmu_add_hw_event_map(eidx_start, eidx_end, cmap, 0);
> +}
> +
> +int sbi_pmu_add_raw_event_counter_map(uint64_t select, u32 cmap)
> +{
> + return pmu_add_hw_event_map(SBI_PMU_EVENT_RAW_IDX,
> + SBI_PMU_EVENT_RAW_IDX, cmap,
> select);
> +}
> +
> +static void pmu_ctr_write_hw(uint32_t cidx, uint64_t ival)
> +{
> +#if __riscv_xlen == 32
> + csr_write_num(CSR_MCYCLE + cidx, ival & 0xFFFF);
> + csr_write_num(CSR_MCYCLEH + cidx, ival >> BITS_PER_LONG);
> +#else
> + csr_write_num(CSR_MCYCLE + cidx, ival);
> +#endif
> +}
> +
> +static int pmu_ctr_start_hw(uint32_t cidx, uint64_t ival, bool
> ival_update)
> +{
> + unsigned long mctr_en = csr_read(CSR_MCOUNTEREN);
> + unsigned long mctr_inhbt = csr_read(CSR_MCOUNTINHIBIT);
> +
> + if (cidx > num_hw_ctrs)
> + return SBI_EINVAL;
> +
> + if (__test_bit(cidx, &mctr_en) && !__test_bit(cidx,
> &mctr_inhbt))
> + return SBI_EALREADY_STARTED;
> +
> + __set_bit(cidx, &mctr_en);
> + __clear_bit(cidx, &mctr_inhbt);
> +
> + if (ival_update)
> + pmu_ctr_write_hw(cidx, ival);
> +
> + csr_write(CSR_MCOUNTEREN, mctr_en);
> + csr_write(CSR_MCOUNTINHIBIT, mctr_inhbt);
> +
> + return 0;
> +}
> +
> +static int pmu_ctr_start_fw(uint32_t cidx, uint32_t fw_evt_code,
> + uint64_t ival, bool ival_update)
> +{
> + u32 hartid = current_hartid();
> + struct sbi_pmu_fw_event *fevent;
> +
> + fevent = &fw_event_map[hartid][fw_evt_code];
> + if (ival_update)
> + fevent->curr_count = ival;
> + fevent->bStarted = TRUE;
> +
> + return 0;
> +}
> +
> +int sbi_pmu_ctr_start(unsigned long cbase, unsigned long cmask,
> + unsigned long flags, uint64_t ival)
> +{
> + int event_idx_type;
> + uint32_t event_code;
> + unsigned long ctr_mask = cmask << cbase;
> + int ret = SBI_EINVAL;
> + bool bUpdate = FALSE;
> +
> + if (cbase >= total_ctrs)
> + return ret;
> +
> + if (flags & SBI_PMU_START_FLAG_SET_INIT_VALUE)
> + bUpdate = TRUE;
> +
> + for_each_set_bit_from(cbase, &ctr_mask, total_ctrs) {
> + event_idx_type = pmu_ctr_validate(cbase,
> &event_code);
> + if (event_idx_type < 0)
> + return SBI_EINVAL;
> + else if (event_idx_type == SBI_PMU_EVENT_TYPE_FW)
> + ret = pmu_ctr_start_fw(cbase, event_code,
> ival, bUpdate);
> + else
> + ret = pmu_ctr_start_hw(cbase, ival, bUpdate);
> + }
> +
> + return ret;
> +}
> +
> +static int pmu_ctr_stop_hw(uint32_t cidx)
> +{
> + unsigned long mctr_en = csr_read(CSR_MCOUNTEREN);
> + unsigned long mctr_inhbt = csr_read(CSR_MCOUNTINHIBIT);
> +
> + if (__test_bit(cidx, &mctr_en) && !__test_bit(cidx,
> &mctr_inhbt)) {
> + __set_bit(cidx, &mctr_inhbt);
> + __clear_bit(cidx, &mctr_en);
> + csr_write(CSR_MCOUNTEREN, mctr_en);
> + csr_write(CSR_MCOUNTINHIBIT, mctr_inhbt);
> + return 0;
> + } else
> + return SBI_EALREADY_STOPPED;
> +}
> +
> +static int pmu_ctr_stop_fw(uint32_t cidx, uint32_t fw_evt_code)
> +{
> + u32 hartid = current_hartid();
> +
> + fw_event_map[hartid][fw_evt_code].bStarted = FALSE;
> +
> + return 0;
> +}
> +
> +int sbi_pmu_ctr_stop(unsigned long cbase, unsigned long cmask,
> + unsigned long flag)
> +{
> + u32 hartid = current_hartid();
> + int ret = SBI_EINVAL;
> + int event_idx_type;
> + uint32_t event_code;
> + unsigned long ctr_mask = cmask << cbase;
> +
> + if (cbase >= total_ctrs)
> + return SBI_EINVAL;
> +
> + for_each_set_bit_from(cbase, &ctr_mask, total_ctrs) {
> + event_idx_type = pmu_ctr_validate(cbase,
> &event_code);
> + if (event_idx_type < 0)
> + return SBI_EINVAL;
> +
> + else if (event_idx_type == SBI_PMU_EVENT_TYPE_FW)
> + ret = pmu_ctr_stop_fw(cbase, event_code);
> + else
> + ret = pmu_ctr_stop_hw(cbase);
> +
> + if (!ret && (flag & SBI_PMU_STOP_FLAG_RESET))
> + active_events[hartid][cbase] =
> SBI_PMU_EVENT_IDX_INVALID;
> + }
> +
> + return ret;
> +}
> +
> +static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt,
> int ctr_idx,
> + unsigned long eindex, uint64_t
> data)
> +{
> + struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
> + const struct sbi_platform *plat = sbi_platform_ptr(scratch);
> + uint64_t mhpmevent_val;
> +
> + /* Get the final mhpmevent value to be written from platform
> */
> + mhpmevent_val = sbi_platform_pmu_xlate_to_mhpmevent(plat,
> eindex, data);
> +
> + if (!mhpmevent_val || ctr_idx < 3 || ctr_idx >=
> SBI_PMU_HW_CTR_MAX)
> + return SBI_EFAIL;
> +
> + /* TODO: The upper 8 bits of mhpmevent is reserved by
> sscofpmf extension.
> + * Update those bits based on the flags received from
> supervisor.
> + * The OVF bit also should be cleared here in case it was not
> cleared
> + * during event stop.
> + */
> + csr_write_num(CSR_MCOUNTINHIBIT + ctr_idx, mhpmevent_val);
> +
> + return 0;
> +}
> +
> +static int pmu_ctr_find_hw(unsigned long cbase, unsigned long cmask,
> + unsigned long event_idx, uint64_t data)
> +{
> + unsigned long ctr_mask;
> + int i, ret = 0, ctr_idx = SBI_ENOTSUPP;
> + struct sbi_pmu_hw_event *temp;
> + unsigned long mctr_en = csr_read(CSR_MCOUNTEREN);
> + unsigned long mctr_inhbt = csr_read(CSR_MCOUNTINHIBIT);
> + int evt_idx_code = get_cidx_code(event_idx);
> +
> + if (cbase > num_hw_ctrs)
> + return SBI_EINVAL;
> +
> + for (i = 0; i < num_hw_events; i++) {
> + temp = &hw_event_map[i];
> + if ((temp->start_idx > event_idx && event_idx < temp-
> >end_idx) ||
> + (temp->start_idx < event_idx && event_idx > temp-
> >end_idx))
> + continue;
> +
> + /* For raw events, event data is used as the select
> value */
> + if ((event_idx == SBI_PMU_EVENT_RAW_IDX) && temp-
> >select != data)
> + continue;
> +
> + ctr_mask = temp->counters & (cmask << cbase);
> + for_each_set_bit_from(cbase, &ctr_mask,
> SBI_PMU_HW_CTR_MAX) {
> + if (!__test_bit(cbase, &mctr_en) &&
> + __test_bit(cbase, &mctr_inhbt)) {
> + ctr_idx = cbase;
> + break;
> + }
> + }
> + }
> +
> + if (ctr_idx == SBI_ENOTSUPP)
> + return SBI_EFAIL;
> +
> + /* No need to update the event selectors for fixed events */
> + if (evt_idx_code != SBI_PMU_HW_CPU_CYCLES &&
> + evt_idx_code != SBI_PMU_HW_INSTRUCTIONS)
> + ret = pmu_update_hw_mhpmevent(temp, ctr_idx,
> event_idx, data);
> +
> + if (!ret)
> + ret = ctr_idx;
> +
> + return ret;
> +}
> +
> +
> +/**
> + * Any firmware counter can map to any firmware event.
> + * Thus, select the first available fw counter after sanity
> + * check.
> + */
> +static int pmu_ctr_find_fw(unsigned long cbase, unsigned long cmask,
> u32 hartid)
> +{
> + int i = 0;
> + int fw_base;
> + unsigned long ctr_mask = cmask << cbase;
> +
> + if (cbase <= num_hw_ctrs)
> + fw_base = num_hw_ctrs + 1;
> + else
> + fw_base = cbase;
> +
> + for (i = fw_base; i < total_ctrs; i++)
> + if ((active_events[hartid][i] ==
> SBI_PMU_EVENT_IDX_INVALID) &&
> + ((1UL << i) & ctr_mask))
> + return i;
> +
> + return SBI_ENOTSUPP;
> +}
> +
> +int sbi_pmu_ctr_cfg_match(unsigned long cidx_base, unsigned long
> cidx_mask,
> + unsigned long flags, unsigned long
> event_idx,
> + uint64_t event_data)
> +{
> + int ctr_idx = SBI_ENOTSUPP;
> + u32 hartid = current_hartid();
> + int event_type = get_cidx_type(event_idx);
> + struct sbi_pmu_fw_event *fevent;
> + uint32_t fw_evt_code;
> + unsigned long tmp = cidx_mask << cidx_base;
> +
> + /* Do a basic sanity check of counter base & mask */
> + if (cidx_base >= total_ctrs || __fls(tmp) >= total_ctrs ||
> + event_type >= SBI_PMU_EVENT_TYPE_MAX)
> + return SBI_EINVAL;
> +
> + if (flags & SBI_PMU_CFG_FLAG_SKIP_MATCH) {
> + /* The caller wants to skip the match because it
> already knows the
> + * counter idx for the given event. Verify that the
> counter idx
> + * is still valid.
> + */
> + if (active_events[hartid][cidx_base] ==
> SBI_PMU_EVENT_IDX_INVALID)
> + return SBI_EINVAL;
> + ctr_idx = cidx_base;
> + goto skip_match;
> + }
> +
> + if (event_type == SBI_PMU_EVENT_TYPE_FW) {
> + /* Any firmware counter can be used track any
> firmware event */
> + ctr_idx = pmu_ctr_find_fw(cidx_base, cidx_mask,
> hartid);
> + } else {
> + ctr_idx = pmu_ctr_find_hw(cidx_base, cidx_mask,
> event_idx, event_data);
> + }
> +
> + if (ctr_idx < 0)
> + return SBI_ENOTSUPP;
> +
> + active_events[hartid][ctr_idx] = event_idx;
> +skip_match:
> + if (event_type == SBI_PMU_EVENT_TYPE_HW) {
> + if (flags & SBI_PMU_CFG_FLAG_CLEAR_VALUE)
> + pmu_ctr_write_hw(ctr_idx, 0);
> + if (flags & SBI_PMU_CFG_FLAG_AUTO_START)
> + pmu_ctr_start_hw(ctr_idx, 0, false);
> + } else if (event_type == SBI_PMU_EVENT_TYPE_FW) {
> + fw_evt_code = get_cidx_code(event_idx);
> + fevent = &fw_event_map[hartid][fw_evt_code];
> + if (flags & SBI_PMU_CFG_FLAG_CLEAR_VALUE)
> + fevent->curr_count = 0;
> + if (flags & SBI_PMU_CFG_FLAG_AUTO_START)
> + fevent->bStarted = TRUE;
> + }
> +
> + return ctr_idx;
> +}
> +
> +inline int sbi_pmu_ctr_incr_fw(enum sbi_pmu_fw_event_code_id fw_id)
> +{
> + u32 hartid = current_hartid();
> + struct sbi_pmu_fw_event *fevent;
> +
> + if (unlikely(fw_id >= SBI_PMU_FW_MAX))
> + return SBI_EINVAL;
> +
> + fevent = &fw_event_map[hartid][fw_id];
> +
> + /* PMU counters will be only enabled during performance
> debugging */
> + if (unlikely(fevent->bStarted))
> + fevent->curr_count++;
> +
> + return 0;
> +}
> +
> +unsigned long sbi_pmu_num_ctr(void)
> +{
> + return (num_hw_ctrs + SBI_PMU_FW_CTR_MAX);
> +}
> +
> +int sbi_pmu_ctr_get_info(uint32_t cidx, unsigned long *ctr_info)
> +{
> + union sbi_pmu_ctr_info cinfo = {0};
> + struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
> +
> + /* Sanity check. Counter1 is not mapped at all */
> + if (cidx >= total_ctrs || cidx == 1)
> + return SBI_EINVAL;
> +
> + /* We have 31 HW counters with 31 being the last
> index(MHPMCOUNTER31) */
> + if (cidx <= num_hw_ctrs) {
> + cinfo.type = SBI_PMU_CTR_TYPE_HW;
> + cinfo.csr = CSR_CYCLE + cidx;
> + /* mcycle & minstret are always 64 bit */
> + if (cidx == 0 || cidx == 2)
> + cinfo.width = 63;
> + else
> + cinfo.width = sbi_hart_mhpm_bits(scratch);
> + } else {
> + /* it's a firmware counter */
> + cinfo.type = SBI_PMU_CTR_TYPE_FW;
> + /* Firmware counters are XLEN bits wide */
> + cinfo.width = BITS_PER_LONG - 1;
> + }
> +
> + *ctr_info = cinfo.value;
> +
> + return 0;
> +}
> +
> +static void pmu_reset_event_map(u32 hartid)
> +{
> + int j;
> +
> + /* Initialize the counter to event mapping table */
> + for (j = 0; j < total_ctrs; j++)
> + active_events[hartid][j] = SBI_PMU_EVENT_IDX_INVALID;
> + for (j = 0; j < SBI_PMU_FW_CTR_MAX; j++)
> + sbi_memset(&fw_event_map[hartid][j], 0,
> + sizeof(struct sbi_pmu_fw_event));
> +}
> +
> +void sbi_pmu_exit(struct sbi_scratch *scratch)
> +{
> + u32 hartid = current_hartid();
> +
> + csr_write(CSR_MCOUNTINHIBIT, -1);
> + csr_write(CSR_MCOUNTEREN, 2);
> + pmu_reset_event_map(hartid);
> +}
> +
> +int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
> +{
> + const struct sbi_platform *plat;
> +
> + if (!sbi_hart_has_feature(scratch,
> SBI_HART_HAS_MCOUNTINHIBIT))
> + return SBI_ENOTSUPP;
> +
> + if (cold_boot) {
> + plat = sbi_platform_ptr(scratch);
> + /* Initialize hw pmu events */
> + sbi_platform_pmu_init(plat);
> +
> + /* mcycle & minstret is available always */
> + num_hw_ctrs = sbi_hart_mhpm_count(scratch) + 2;
> + total_ctrs = num_hw_ctrs + SBI_PMU_FW_CTR_MAX;
> + }
> +
> + pmu_reset_event_map(current_hartid());
> +
> + return 0;
> +}
> --
> 2.25.1
>
>
More information about the opensbi
mailing list