[PATCH v2 5/5] lib: utils/timer: Simplify MTIMER synchronization
Atish Patra
atishp at atishpatra.org
Thu Aug 12 08:09:10 PDT 2021
On Wed, Aug 11, 2021 at 9:19 PM Anup Patel <anup at brainfault.org> wrote:
>
> On Thu, Aug 12, 2021 at 2:37 AM Atish Patra <atishp at atishpatra.org> wrote:
> >
> > On Sat, Aug 7, 2021 at 6:34 AM Anup Patel <anup.patel at wdc.com> wrote:
> > >
> > > We simplify MTIMER synchronization as follows:
> > >
> > > 1) Detect MTIMER devices with unique (or non-shared) MTIME
> > > register at boot-time
> > > 2) Select first MTIMER device with no associated HART as our
> > > reference MTIMER device
> > > 3) Only synchronize MTIMER devices with unique (or non-shared)
> > > MTIME register using reference MTIMER device
> > > 4) Directly update the MTIME register at time of synchronization
> > > because MTIME is a read/write register.
> > >
> > > Signed-off-by: Anup Patel <anup.patel at wdc.com>
> > > ---
> > > include/sbi_utils/timer/aclint_mtimer.h | 7 ++-
> > > lib/utils/timer/aclint_mtimer.c | 67 +++++++++++++++----------
> > > lib/utils/timer/fdt_timer_mtimer.c | 39 ++++++++++++--
> > > 3 files changed, 80 insertions(+), 33 deletions(-)
> > >
> > > diff --git a/include/sbi_utils/timer/aclint_mtimer.h b/include/sbi_utils/timer/aclint_mtimer.h
> > > index fdc46cd..a9fe445 100644
> > > --- a/include/sbi_utils/timer/aclint_mtimer.h
> > > +++ b/include/sbi_utils/timer/aclint_mtimer.h
> > > @@ -31,14 +31,19 @@ struct aclint_mtimer_data {
> > > u32 first_hartid;
> > > u32 hart_count;
> > > bool has_64bit_mmio;
> > > + bool has_shared_mtime;
> > > /* Private details (initialized and used by ACLINT MTIMER library) */
> > > struct aclint_mtimer_data *time_delta_reference;
> > > unsigned long time_delta_computed;
> > > - u64 time_delta;
> > > u64 (*time_rd)(volatile u64 *addr);
> > > void (*time_wr)(bool timecmp, u64 value, volatile u64 *addr);
> > > };
> > >
> > > +void aclint_mtimer_sync(struct aclint_mtimer_data *mt);
> > > +
> > > +void aclint_mtimer_set_reference(struct aclint_mtimer_data *mt,
> > > + struct aclint_mtimer_data *ref);
> > > +
> > > int aclint_mtimer_warm_init(void);
> > >
> > > int aclint_mtimer_cold_init(struct aclint_mtimer_data *mt,
> > > diff --git a/lib/utils/timer/aclint_mtimer.c b/lib/utils/timer/aclint_mtimer.c
> > > index 0e4e846..d612b12 100644
> > > --- a/lib/utils/timer/aclint_mtimer.c
> > > +++ b/lib/utils/timer/aclint_mtimer.c
> > > @@ -57,7 +57,7 @@ static u64 mtimer_value(void)
> > > u64 *time_val = (void *)mt->mtime_addr;
> > >
> > > /* Read MTIMER Time Value */
> > > - return mt->time_rd(time_val) + mt->time_delta;
> > > + return mt->time_rd(time_val);
> > > }
> > >
> > > static void mtimer_event_stop(void)
> > > @@ -77,7 +77,7 @@ static void mtimer_event_start(u64 next_event)
> > > u64 *time_cmp = (void *)mt->mtimecmp_addr;
> > >
> > > /* Program MTIMER Time Compare */
> > > - mt->time_wr(true, next_event - mt->time_delta,
> > > + mt->time_wr(true, next_event,
> > > &time_cmp[target_hart - mt->first_hartid]);
> > > }
> > >
> > > @@ -88,36 +88,51 @@ static struct sbi_timer_device mtimer = {
> > > .timer_event_stop = mtimer_event_stop
> > > };
> > >
> > > +void aclint_mtimer_sync(struct aclint_mtimer_data *mt)
> > > +{
> > > + u64 v1, v2, mv, delta;
> > > + u64 *mt_time_val, *ref_time_val;
> > > + struct aclint_mtimer_data *reference;
> > > +
> > > + /* Sync-up non-shared MTIME if reference is available */
> > > + if (mt->has_shared_mtime || !mt->time_delta_reference)
> > > + return;
> > > +
> > > + reference = mt->time_delta_reference;
> > > + mt_time_val = (void *)mt->mtime_addr;
> > > + ref_time_val = (void *)reference->mtime_addr;
> > > + if (!atomic_raw_xchg_ulong(&mt->time_delta_computed, 1)) {
> > > + v1 = mt->time_rd(mt_time_val);
> > > + mv = reference->time_rd(ref_time_val);
> > > + v2 = mt->time_rd(mt_time_val);
> > > + delta = mv - ((v1 / 2) + (v2 / 2));
> > > + mt->time_wr(false, mt->time_rd(mt_time_val) + delta,
> > > + mt_time_val);
> > > + }
> > > +
> > > +}
> > > +
> > > +void aclint_mtimer_set_reference(struct aclint_mtimer_data *mt,
> > > + struct aclint_mtimer_data *ref)
> > > +{
> > > + if (!mt || !ref || mt == ref)
> > > + return;
> > > +
> > > + mt->time_delta_reference = ref;
> > > + mt->time_delta_computed = 0;
> > > +}
> > > +
> > > int aclint_mtimer_warm_init(void)
> > > {
> > > - u64 v1, v2, mv;
> > > + u64 *mt_time_cmp;
> > > u32 target_hart = current_hartid();
> > > - struct aclint_mtimer_data *reference;
> > > - u64 *mt_time_val, *mt_time_cmp, *ref_time_val;
> > > struct aclint_mtimer_data *mt = mtimer_hartid2data[target_hart];
> > >
> > > if (!mt)
> > > return SBI_ENODEV;
> > >
> > > - /*
> > > - * Compute delta if reference available
> > > - *
> > > - * We deliberately compute time_delta in warm init so that time_delta
> > > - * is computed on a HART which is going to use given MTIMER. We use
> > > - * atomic flag timer_delta_computed to ensure that only one HART does
> > > - * time_delta computation.
> > > - */
> > > - if (mt->time_delta_reference) {
> > > - reference = mt->time_delta_reference;
> > > - mt_time_val = (void *)mt->mtime_addr;
> > > - ref_time_val = (void *)reference->mtime_addr;
> > > - if (!atomic_raw_xchg_ulong(&mt->time_delta_computed, 1)) {
> > > - v1 = mt->time_rd(mt_time_val);
> > > - mv = reference->time_rd(ref_time_val);
> > > - v2 = mt->time_rd(mt_time_val);
> > > - mt->time_delta = mv - ((v1 / 2) + (v2 / 2));
> > > - }
> > > - }
> > > + /* Sync-up MTIME register */
> > > + aclint_mtimer_sync(mt);
> > >
> > > /* Clear Time Compare */
> > > mt_time_cmp = (void *)mt->mtimecmp_addr;
> > > @@ -173,9 +188,7 @@ int aclint_mtimer_cold_init(struct aclint_mtimer_data *mt,
> > > return SBI_EINVAL;
> > >
> > > /* Initialize private data */
> > > - mt->time_delta_reference = reference;
> > > - mt->time_delta_computed = 0;
> > > - mt->time_delta = 0;
> > > + aclint_mtimer_set_reference(mt, reference);
> > > mt->time_rd = mtimer_time_rd32;
> > > mt->time_wr = mtimer_time_wr32;
> > >
> > > diff --git a/lib/utils/timer/fdt_timer_mtimer.c b/lib/utils/timer/fdt_timer_mtimer.c
> > > index 15a36ed..26b5a2a 100644
> > > --- a/lib/utils/timer/fdt_timer_mtimer.c
> > > +++ b/lib/utils/timer/fdt_timer_mtimer.c
> > > @@ -17,19 +17,18 @@
> > >
> > > static unsigned long mtimer_count = 0;
> > > static struct aclint_mtimer_data mtimer[MTIMER_MAX_NR];
> > > +static struct aclint_mtimer_data *mt_reference = NULL;
> > >
> > > static int timer_mtimer_cold_init(void *fdt, int nodeoff,
> > > const struct fdt_match *match)
> > > {
> > > - int rc;
> > > + int i, rc;
> > > unsigned long offset, addr[2], size[2];
> > > - struct aclint_mtimer_data *mt, *mtmaster = NULL;
> > > + struct aclint_mtimer_data *mt;
> > >
> > > if (MTIMER_MAX_NR <= mtimer_count)
> > > return SBI_ENOSPC;
> > > mt = &mtimer[mtimer_count];
> > > - if (0 < mtimer_count)
> > > - mtmaster = &mtimer[0];
> > >
> > > rc = fdt_parse_aclint_node(fdt, nodeoff, true,
> > > &addr[0], &size[0], &addr[1], &size[1],
> > > @@ -37,6 +36,7 @@ static int timer_mtimer_cold_init(void *fdt, int nodeoff,
> > > if (rc)
> > > return rc;
> > > mt->has_64bit_mmio = true;
> > > + mt->has_shared_mtime = false;
> > >
> > > if (match->data) { /* SiFive CLINT */
> > > /* Set CLINT addresses */
> > > @@ -63,10 +63,39 @@ static int timer_mtimer_cold_init(void *fdt, int nodeoff,
> > > mt->has_64bit_mmio = false;
> > > }
> > >
> > > - rc = aclint_mtimer_cold_init(mt, mtmaster);
> > > + /* Check if MTIMER device has shared MTIME address */
> > > + mt->has_shared_mtime = false;
> > > + for (i = 0; i < mtimer_count; i++) {
> > > + if (mtimer[i].mtime_addr == mt->mtime_addr) {
> > > + mt->has_shared_mtime = true;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + /* Initialize the MTIMER device */
> > > + rc = aclint_mtimer_cold_init(mt, mt_reference);
> > > if (rc)
> > > return rc;
> > >
> > > + /*
> > > + * Select first MTIMER device with no associated HARTs as
> > > + * our reference MTIMER device
> > > + */
> > > + if (!mt->hart_count && !mt_reference) {
> > > + mt_reference = mt;
> > > + /*
> > > + * Set reference for already propbed MTIMER devices
> > > + * with non-shared MTIME
> > > + */
> > > + for (i = 0; i < mtimer_count; i++)
> > > + if (!mtimer[i].has_shared_mtime)
> > > + aclint_mtimer_set_reference(&mtimer[i], mt);
> > > + }
> > > +
> >
> > Is there a reason this is done after cold_init ?
>
> We should select a MTIMER device as reference only after it is
> successfully initialized by the cold_init(). This ensures that even the
> reference MTIMER device has gone through all sanity checks.
Got it. Thanks.
>
> Also, simply selecting the first successfully initialized MTIMER device is
> also not appropriate because we don't know how MTIMER devices are
> ordered in DT.
>
> For now, the strategy is to select a successfully initialized MTIMER
> device with hart_count = 0 as reference. In future, we might select
Is this information documented somewhere ? The platform must have a
MTIMER device
with zero hart_count in order to get a reference.
Just for my understanding, when do we need multiple MTIMER devices
with zero hart count in multi-socket
scenarios ?
> optional DT property to help us select the reference MTIMER device.
>
> Regards,
> Anup
>
> >
> > > + /* Explicitly sync-up MTIMER devices not associated with any HARTs */
> > > + if (!mt->hart_count)
> > > + aclint_mtimer_sync(mt);
> > > +
> > > mtimer_count++;
> > > return 0;
> > > }
> > > --
> > > 2.25.1
> > >
> > >
> > > --
> > > opensbi mailing list
> > > opensbi at lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/opensbi
> >
> >
> > --
> > Regards,
> > Atish
Other than that, this patch looks good to me.
Reviewed-by: Atish Patra <atish.patra at wdc.com>
--
Regards,
Atish
More information about the opensbi
mailing list