[PATCH 4/5] Makefile: Allow padding zeros when converting DTB to C source

Atish Patra atishp at atishpatra.org
Fri Oct 16 19:31:05 EDT 2020


On Thu, Oct 15, 2020 at 1:13 AM Anup Patel <anup.patel at wdc.com> wrote:
>
> From: Heinrich Schuchardt <xypron.glpk at gmx.de>
>
> We extend d2c.sh to allow padding zeros in output C source when
> converting DTB to C source. Using this feature, platforms can
> create extra room for in-place FDT fixups on built-in DTBs.
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> Signed-off-by: Anup Patel <anup.patel at wdc.com>
> ---
>  Makefile       | 7 +++++--
>  scripts/d2c.sh | 9 ++++++++-
>  2 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 6c36f09..a231881 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -291,7 +291,10 @@ compile_dts = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
>              $(CPP) $(DTSCPPFLAGS) $(2) | $(DTC) -O dtb -i `dirname $(2)` -o $(1)
>  compile_d2c = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
>              echo " D2C       $(subst $(build_dir)/,,$(1))"; \
> -            $(src_dir)/scripts/d2c.sh -i $(4) -a $(3) -p $(2) > $(1)
> +            $(if $($(2)-varalign-$(3)),$(eval D2C_ALIGN_BYTES := $($(2)-varalign-$(3))),$(eval D2C_ALIGN_BYTES := $(4))) \
> +            $(if $($(2)-varprefix-$(3)),$(eval D2C_NAME_PREFIX := $($(2)-varprefix-$(3))),$(eval D2C_NAME_PREFIX := $(5))) \
> +            $(if $($(2)-padding-$(3)),$(eval D2C_PADDING_BYTES := $($(2)-padding-$(3))),$(eval D2C_PADDING_BYTES := 0)) \
> +            $(src_dir)/scripts/d2c.sh -i $(6) -a $(D2C_ALIGN_BYTES) -p $(D2C_NAME_PREFIX) -t $(D2C_PADDING_BYTES) > $(1)
>  compile_gen_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
>              echo " GEN-DEP   $(subst $(build_dir)/,,$(1))"; \
>              echo "$(1:.dep=$(2)): $(3)" >> $(1)
> @@ -361,7 +364,7 @@ $(platform_build_dir)/%.dep: $(platform_src_dir)/%.dts
>         $(call compile_gen_dep,$@,.o,$(@:.dep=.c))
>
>  $(platform_build_dir)/%.c: $(platform_build_dir)/%.dtb
> -       $(call compile_d2c,$@,$(platform-varprefix-$(subst .dtb,.o,$(subst /,-,$(subst $(platform_build_dir)/,,$<)))),16,$<)
> +       $(call compile_d2c,$@,platform,$(subst .dtb,.o,$(subst /,-,$(subst $(platform_build_dir)/,,$<))),16,dt,$<)
>
>  $(platform_build_dir)/%.dtb: $(platform_src_dir)/%.dts
>         $(call compile_dts,$@,$<)
> diff --git a/scripts/d2c.sh b/scripts/d2c.sh
> index 821a995..33a3ccf 100755
> --- a/scripts/d2c.sh
> +++ b/scripts/d2c.sh
> @@ -9,6 +9,7 @@ function usage()
>         echo "     -i <input_file_path> Input binary file path"
>         echo "     -a <c_align>         Output C array alignment"
>         echo "     -p <c_prefix>        Output C array name prefix"
> +       echo "     -t <num_zero_bytes>  Output padding zero bytes"
>         exit 1;
>  }
>
> @@ -16,8 +17,9 @@ function usage()
>  INPUT_PATH=""
>  OUTPUT_C_ALIGN=""
>  OUTPUT_C_PREFIX=""
> +NUM_ZERO_BYTES=0
>
> -while getopts "hi:a:p:o:" o; do
> +while getopts "hi:a:p:t:" o; do
>         case "${o}" in
>         h)
>                 usage
> @@ -31,6 +33,9 @@ while getopts "hi:a:p:o:" o; do
>         p)
>                 OUTPUT_C_PREFIX=${OPTARG}
>                 ;;
> +       t)
> +               NUM_ZERO_BYTES=${OPTARG}
> +               ;;
>         *)
>                 usage
>                 ;;
> @@ -62,6 +67,8 @@ printf "const char __attribute__((aligned(%s))) %s_start[] = {\n" "${OUTPUT_C_AL
>
>  od -v -t x1 -An ${INPUT_PATH} | awk '{for (i=1; i<=NF; i++) printf " 0x%s,", $i; printf "\n"; }'
>
> +echo __dummy__ | awk "{for (i=1; i<=${NUM_ZERO_BYTES}; i++) { printf \" 0x00,\"; if (i % 16 == 0) printf \"\n\"; } }"
> +
>  printf "};\n"
>
>  printf "const unsigned long %s_size = sizeof(%s_start);\n" "${OUTPUT_C_PREFIX}" "${OUTPUT_C_PREFIX}"
> --
> 2.25.1
>
>
> --
> opensbi mailing list
> opensbi at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/opensbi


Reviewed-by: Atish Patra <atish.patra at wdc.com>

-- 
Regards,
Atish



More information about the opensbi mailing list