[PATCH 16/16] docs: Add initial documentation for domain support
Anup Patel
Anup.Patel at wdc.com
Fri Oct 2 02:28:18 EDT 2020
> -----Original Message-----
> From: Atish Patra <atishp at atishpatra.org>
> Sent: 02 October 2020 11:42
> To: Anup Patel <Anup.Patel at wdc.com>
> Cc: Atish Patra <Atish.Patra at wdc.com>; Alistair Francis
> <Alistair.Francis at wdc.com>; Anup Patel <anup at brainfault.org>; OpenSBI
> <opensbi at lists.infradead.org>
> Subject: Re: [PATCH 16/16] docs: Add initial documentation for domain
> support
>
> On Thu, Oct 1, 2020 at 9:49 PM Anup Patel <Anup.Patel at wdc.com> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: Atish Patra <atishp at atishpatra.org>
> > > Sent: 02 October 2020 04:32
> > > To: Anup Patel <Anup.Patel at wdc.com>
> > > Cc: Atish Patra <Atish.Patra at wdc.com>; Alistair Francis
> > > <Alistair.Francis at wdc.com>; Anup Patel <anup at brainfault.org>;
> > > OpenSBI <opensbi at lists.infradead.org>
> > > Subject: Re: [PATCH 16/16] docs: Add initial documentation for
> > > domain support
> > >
> > > On Fri, Sep 25, 2020 at 4:30 AM Anup Patel <anup.patel at wdc.com>
> wrote:
> > > >
> > > > We add initial documentation for OpenSBI domain support to help
> > > > RISC-V platform vendors achieve system-level partitioning.
> > > >
> > > > Signed-off-by: Anup Patel <anup.patel at wdc.com>
> > > > ---
> > > > README.md | 3 ++
> > > > docs/domain_support.md | 105
> > > +++++++++++++++++++++++++++++++++++++++++
> > > > docs/doxygen.cfg | 1 +
> > > > 3 files changed, 109 insertions(+) create mode 100644
> > > > docs/domain_support.md
> > > >
> > > > diff --git a/README.md b/README.md index bd41ba3..03c02fb 100644
> > > > --- a/README.md
> > > > +++ b/README.md
> > > > @@ -225,6 +225,8 @@ Detailed documentation of various aspects of
> > > > OpenSBI can be found under the
> > > > * [Platform Documentation]: Documentation of the platforms
> > > > currently
> > > supported.
> > > > * [Firmware Documentation]: Documentation for the different types
> > > > of
> > > firmware
> > > > examples build supported by OpenSBI.
> > > > +* [Domain Support]: Documentation for the OpenSBI domain support
> > > > +which helps
> > > > + users achieve system-level partitioning using OpenSBI.
> > > >
> > > > OpenSBI source code is also well documented. For source level
> > > > documentation, doxygen style is used. Please refer to the
> > > > [Doxygen manual] for details on this @@ -278,6 +280,7 @@ make
> > > > I=<install_directory> install_docs [Platform Support Guide]:
> > > > docs/platform_guide.md [Platform Documentation]:
> > > > docs/platform/platform.md [Firmware Documentation]:
> > > > docs/firmware/fw.md
> > > > +[Domain Support]: docs/domain_support.md
> > > > [Doxygen manual]: http://www.doxygen.nl/manual/index.html
> > > > [Kendryte standalone SDK]:
> > > > https://github.com/kendryte/kendryte-standalone-sdk
> > > > [third party notices]: ThirdPartyNotices.md diff --git
> > > > a/docs/domain_support.md b/docs/domain_support.md new file
> mode
> > > 100644
> > > > index 0000000..fad4f67
> > > > --- /dev/null
> > > > +++ b/docs/domain_support.md
> > > > @@ -0,0 +1,105 @@
> > > > +OpenSBI Domain Support
> > > > +======================
> > > > +
> > > > +An OpenSBI domain is a system-level partition (subset) of
> > > > +underlying hardware having it's own memory regions (RAM and
> MMIO
> > > > +devices) and HARTs. The OpenSBI will try to achieve secure
> > > > +isolation between domains using RISC-V platform features such as
> PMP, IOPMP, etc.
> > > > +
> > >
> > > May be specify a few other options such as ePMP, SiFive shield as
> > > well as you mentioned in the patch commit.
> >
> > Okay, will add.
> >
> > >
> > > > +Important entities which help implement OpenSBI domain support
> are:
> > > > +
> > > > +* **struct sbi_domain_memregion** - Representation of a domain
> > > memory
> > > > +region
> > > > +* **struct sbi_hartmask** - Representation of domain HART set
> > > > +* **struct sbi_domain** - Representation of a domain instance
> > > > +
> > > > +Each HART of a RISC-V platform must have an OpenSBI domain
> > > > +assigned
> > > to it.
> > > > +The OpenSBI platform support is responsible for populating
> > > > +domains and providing HART id to domain mapping. The OpenSBI
> > > > +domain support will by default assign **the ROOT domain** to all
> > > > +HARTs of a RISC-V platform so it is not mandatory for the OpenSBI
> > > > +platform support to
> > > populate domains.
> > > > +
> > > > +Domain Memory Region
> > > > +--------------------
> > > > +
> > > > +A domain memory region is represented by **struct
> > > > +sbi_domain_memregion** in OpenSBI and has following details:
> > > > +
> > > > +* **order** - The size of a memory region is **2 ^ order** where
> > > > +**order**
> > > > + must be **3 <= order <= __riscv_xlen**
> > > > +* **base** - The base address of a memory region is **2 ^ order**
> > > > + aligned start address
> > > > +* **flags** - The flags of a memory region represent memory type
> (i.e.
> > > > + RAM or MMIO) and allowed accesses (i.e. READ, WRITE, EXECUTE,
> > > > +etc)
> > > > +
> > > > +Domain Instance
> > > > +---------------
> > > > +
> > > > +A domain instance is represented by **struct sbi_domain** in
> > > > +OpenSBI and has following details:
> > > > +
> > > > +* **index** - Logical index of this domain
> > > > +* **name** - Name of this domain
> > > > +* **assigned_harts** - HARTs assigned to this domain
> > > > +* **possible_harts** - HARTs possible in this domain
> > > > +* **regions** - Array of memory regions terminated by a memory
> > > > +region
> > > > + with order zero
> > > > +* **boot_hartid** - HART id of the HART booting this domain. The
> > > > +domain
> > > > + boot HART will be started at boot-time if boot HART is a
> > > > +possible and
> > > > + assigned for this domain.
> > > > +* **next_addr** - Address of the next booting stage for this
> > > > +domain
> > > > +* **next_arg1** - Arg1 (or 'a1' register) of the next booting stage for
> > > > + this domain
> > > > +* **next_mode** - Priviledge mode of the next booting stage for
> > > > +this domain
> > > > +* **system_reset_allowed** - Is domain allowed to reset the
> system?
> > > > +
> > > Will it be better to keep a bitwise flags for such features ?
> > > Does a domain allow modification of PMP regions ?
> > >
> > > > +The memory regions represented by **regions** in **struct
> > > > +sbi_domain** have following additional constraints to align with
> > > > +RISC-V
> > > PMP requirements:
> > > > +
> > > > +* A memory region to protect OpenSBI firmware from S-mode and U-
> > > mode
> > > > + should always be present
> > > > +* For two overlapping memory regions, one should be sub-region of
> > > > +another
> > > > +* Two overlapping memory regions should not be of same size
> > > > +* Two overlapping memory regions canot have same flags
> > > /canot/cannot/gc
> >
> > Okay, will update.
> >
> > >
> > > > +* Memory access checks on overlapping address should prefer
> > > > +smallest
> > > > + overlapping memory region flags.
> > > > +
> > > > +ROOT Domain
> > > > +-----------
> > > > +
> > > > +**The ROOT domain** is the default OpenSBI domain which is
> > > > +assigned by default to all HARTs of a RISC-V platform. The
> > > > +OpenSBI domain support will hand-craft **the ROOT domain** very
> > > > +early at boot-time in the following manner:
> > > > +
> > > > +* **index** - Logical index of the ROOT domain is always zero
> > > > +* **name** - Name of the ROOT domain is "root"
> > > > +* **assigned_harts** - At boot-time all valid HARTs of a RISC-V
> > > > +platform
> > > > + are assigned the ROOT domain which changes later based on
> > > > +OpenSBI
> > > > + platform support
> > > > +* **possible_harts** - All valid HARTs of a RISC-V platform are
> > > > +possible
> > > > + HARTs of the ROOT domain
> > > > +* **regions** - Two memory regions available to the ROOT domain:
> > > > + **A)** A memory region to protect OpenSBI firmware from S-mode
> > > > +and U-mode
> > > > + **B)** A memory region of **order=__riscv_xlen** allowing
> > > > +S-mode and
> > > > + U-mode access to full memory address space
> > > > +* **boot_hartid** - Coldboot HART is the HART booting the ROOT
> > > domain
> > > > +* **next_addr** - Next booting stage address in coldboot HART
> > > > +scratch
> > > > + space is the next address for the ROOT domain
> > > > +* **next_arg1** - Next booting stage arg1 in coldboot HART
> > > > +scratch space
> > > > + is the next arg1 for the ROOT domain
> > > > +* **next_mode** - Next booting stage mode in coldboot HART
> > > > +scratch space
> > > > + is the next mode for the ROOT domain
> > > > +* **system_reset_allowed** - The ROOT domain is allowed to reset
> > > > +the system
> > > > +
> > > > +Domain Effects
> > > > +--------------
> > > > +
> > > > +Few noteworthy effects of a system partitioned into domains are
> > > > +as
> > > follows:
> > > > +
> > > > +* At any point in time, a HART is running in exactly one OpenSBI
> > > > +domain context
> > > > +* The SBI IPI and RFENCE calls from HART A are restricted to the
> > > > +HARTs in
> > > > + domain assigned to HART A
> > > > +* The SBI HSM calls which try to change/read state of HART B from
> > > > +HART A will
> > > > + only work if both HART A and HART B are assigned same domain
> > > > +* A HART running in S-mode or U-mode can only access memory
> based
> > > > +on the
> > > > + memory regions of the domain assigned to the HART
> > >
> > > How about effects on PMP ?
> >
> > PMP is only accessible to M-mode so S-mode and U-mode can only access
> > memory based on PMP configuration which is based on the memory
> regions
> > of domain assigned to the HART.
> >
> > Is there anything missing ?
> >
>
> I meant to ask about the general effects of domain on PMP. I was not asking
> to follow up the previous sentence. Let me rephrase.
>
> A child domain can run M-mode only payload where next_mode will be M-
> mode. Correct ?
> In that case, can it modify PMP ? or what happens if a child domain next
> stage running in M-mode tries to modify some pmp configurations ?
There is no parent child relationship between domains. It's much simpler
now compared to initial ideas.
We just have a ROOT domain and all other domains are non-ROOT domains.
The M-mode software (OpenSBI) will ensure that PMP regions are configured
for a HART based on the assigned domain.
>
> > >
> > > > \ No newline at end of file
> > > > diff --git a/docs/doxygen.cfg b/docs/doxygen.cfg index
> > > > dbf8ef9..82f31a7 100644
> > > > --- a/docs/doxygen.cfg
> > > > +++ b/docs/doxygen.cfg
> > > > @@ -795,6 +795,7 @@ INPUT = @@SRC_DIR@@/README.md
> \
> > > > @@SRC_DIR@@/docs/platform_guide.md \
> > > > @@SRC_DIR@@/docs/platform_requirements.md \
> > > > @@SRC_DIR@@/docs/library_usage.md \
> > > > + @@SRC_DIR@@/docs/domain_support.md \
> > > > @@SRC_DIR@@/docs/firmware \
> > > > @@SRC_DIR@@/docs/platform \
> > > > @@SRC_DIR@@/include \
> > > > --
> > > > 2.25.1
> > > >
> > > >
> > > > --
> > > > opensbi mailing list
> > > > opensbi at lists.infradead.org
> > > > http://lists.infradead.org/mailman/listinfo/opensbi
> > >
> > >
> > >
> > > --
> > > Regards,
> > > Atish
> >
> > Regards,
> > Anup
>
>
>
> --
> Regards,
> Atish
Regards,
Anup
More information about the opensbi
mailing list