Can't connect to Juniper VPN when a 'Post Sign-In Message' is set

[Katelyn Schiesser]

Hey all,

I have been using openconnect to get on work's Juniper Pulse VPN for a
while, Recently, they changed things so that when we log in we are
greeted with a proceed/decline check and a message.

This causes openconnect to tell me 'Failed to obtain WebVPN cookie' -
full log below.

Is there anything I can do to get around this?

Thanks!
Katelyn Schiesser



[katelyn at xb ~]$ sudo openconnect --juniper vpn.company.com
WARNING: Juniper Network Connect support is experimental.
It will probably be superseded by Junos Pulse support.
GET https://vpn.company.com/
Attempting to connect to server x.x.x.x:443
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
Got HTTP response: HTTP/1.1 302 Found
GET https://vpn.company.com/dana-na/auth/url_default/welcome.cgi
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
frmLogin
username:
password:
POST https://vpn.company.com/dana-na/auth/url_default/login.cgi
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
Got HTTP response: HTTP/1.1 302 Moved
GET https://vpn.company.com/dana-na/auth/url_default/welcome.cgi?p=sn-postauth-show&id=state_b27916813ff06420afa89ef2cfeb716d
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
frmLogin
POST https://vpn.company.com/dana-na/auth/url_default/login.cgi
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
Got HTTP response: HTTP/1.1 302 Moved
GET https://vpn.company.com/dana-na/auth/url_default/welcome.cgi?p=sn-postauth-show&id=state_b27916813ff06420afa89ef2cfeb716d
SSL negotiation with vpn.company.com
Connected to HTTPS on vpn.company.com
frmLogin
Failed to obtain WebVPN cookie