Discard bad split include

[David Woodhouse]

On Mon, 2014-08-11 at 01:10 -0400, Carl Craft wrote:
> Hello,
> 
> Compiled 6.0 successfully for Windows7, everything seemed great until:
> 
> Discard bad split include: "10.47.118.240/255.255.255.240"
> Discard bad split include: "10.47.100.224/255.255.255.224"
> Discard bad split include: "10.47.101.0/255.255.255.224"
> Discard bad split include: "10.47.101.32/255.255.255.224"
> Discard bad split include: "10.47.100.208/255.255.255.240"
> Discard bad split include: "10.47.118.160/255.255.255.240"
> Discard bad split include: "10.47.118.176/255.255.255.240"
> Discard bad split include: "10.47.118.208/255.255.255.240"
> Discard bad split include: "10.47.118.192/255.255.255.240"
> 
> I'm not sure what this means, but I can see that the routes are not
> added to the routing table after connecting.  I also saw that the
> interface IP address was not set, but assumed that was a failure due
> to the above.  I can't find any documentation about this, any help
> would be appreciated!

I think this should already be fixed in the git tree by
http://git.infradead.org/users/dwmw2/openconnect.git/commitdiff/671c8eb

-- 
David Woodhouse                            Open Source Technology Centre
David.Woodhouse at intel.com                              Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5745 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openconnect-devel/attachments/20140811/e39b0798/attachment.bin>