SSD on the Netwinder
daniel at gimpelevich.san-francisco.ca.us
Fri Apr 12 16:53:21 PDT 2019
On Wed, 2019-04-10 at 16:08 -0400, Ralph Siemsen wrote:
> On Wed, Apr 10, 2019 at 11:22:54AM -0700, Daniel Gimpelevich wrote:
> >I'm out of town at the moment, so I can't check the label right now,
> >IIRC, the stock Corel 12V PSU is 1.5A, not 2A.
> It depends a bit on the vintage. Early customers in Europe received
> 9V/2A wall warts, while North America received 12V/1.5A.
> Later on, both were replaced with HiTRON 12V/2A units. As Jon has a
> board, it is most likely the 12V/2A power supply.
Considering that what I have is a Rev5 from 1999, that makes sense. I'm
curious whether the plug on the 12V/2A model actually matched the
Netwinder, since the plugs on my Corel 12V/1.5A units do not.
More information about the Netwinder