[PATCH] kbuild: use objcopy to generate asm-offsets
Vegard Nossum
vegard.nossum at oracle.com
Wed Aug 28 01:36:04 PDT 2024
In order to give assembly code access to C structs without having to
hardcore member offsets, the kernel compiles a C source file listing all
the structs and offsets that are needed in assembly code. Using some
C preprocessor trickery and a sed script, the compiled assembly code is
turned back into C preprocessor code that in turn can be used by the
asssembly code.
This sed script is very hard to read and understand.
Remove the sed script and compile the C source listing structs and
offsets to an object file (instead of assembly code) that embeds C source
directly. Then extract the C source using objcopy.
The resulting code is more readable, less fragile, and sligthly shorter.
Note to reviewers: The 'objcopy ... /dev/stdout | cat' bit is needed to
force the correct ordering of the objcopy lines vs. the surrounding echo
commands; without it, objcopy will open /dev/stdout (which refers to a
temporary file created by kbuild) and reset the file offset to 0. In
other words, the pipe ensures that objcopy doesn't overwrite the lines
that already exist in /dev/stdout.
Signed-off-by: Vegard Nossum <vegard.nossum at oracle.com>
---
Kbuild | 10 +++++-----
arch/arm/mach-at91/Makefile | 4 ++--
arch/arm/mach-omap2/Makefile | 4 ++--
arch/arm64/kvm/Makefile | 9 +++++----
arch/x86/kvm/Makefile | 4 ++--
arch/x86/um/Makefile | 6 +++---
drivers/memory/Makefile | 4 ++--
include/linux/kbuild.h | 15 +++++++++++----
samples/bpf/Makefile | 4 ++--
scripts/Makefile.lib | 13 +------------
scripts/mod/Makefile | 4 ++--
11 files changed, 37 insertions(+), 40 deletions(-)
diff --git a/Kbuild b/Kbuild
index 464b34a08f51e..412b77007deb1 100644
--- a/Kbuild
+++ b/Kbuild
@@ -9,9 +9,9 @@
bounds-file := include/generated/bounds.h
-targets := kernel/bounds.s
+targets := kernel/bounds.o
-$(bounds-file): kernel/bounds.s FORCE
+$(bounds-file): kernel/bounds.o FORCE
$(call filechk,offsets,__LINUX_BOUNDS_H__)
# Generate timeconst.h
@@ -27,11 +27,11 @@ $(timeconst-file): kernel/time/timeconst.bc FORCE
offsets-file := include/generated/asm-offsets.h
-targets += arch/$(SRCARCH)/kernel/asm-offsets.s
+targets += arch/$(SRCARCH)/kernel/asm-offsets.o
-arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file)
+arch/$(SRCARCH)/kernel/asm-offsets.o: $(timeconst-file) $(bounds-file)
-$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
+$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.o FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
# Check for missing system calls
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 794bd12ab0a8e..4d4be0000fd98 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -18,10 +18,10 @@ ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
-$(obj)/pm_data-offsets.h: $(obj)/pm_data-offsets.s FORCE
+$(obj)/pm_data-offsets.h: $(obj)/pm_data-offsets.o FORCE
$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
$(obj)/pm_suspend.o: $(obj)/pm_data-offsets.h
-targets += pm_data-offsets.s
+targets += pm_data-offsets.o
clean-files += pm_data-offsets.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index daf21127c82f1..991ffe6871d1d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -217,12 +217,12 @@ obj-y += omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
-$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
+$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.o FORCE
$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
$(obj)/sleep33xx.o $(obj)/sleep43xx.o: $(obj)/pm-asm-offsets.h
-targets += pm-asm-offsets.s
+targets += pm-asm-offsets.o
clean-files += pm-asm-offsets.h
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 86a629aaf0a13..ee699a683d82c 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -28,17 +28,18 @@ kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \
kvm-$(CONFIG_HW_PERF_EVENTS) += pmu-emul.o pmu.o
kvm-$(CONFIG_ARM64_PTR_AUTH) += pauth.o
-always-y := hyp_constants.h hyp-constants.s
+always-y := hyp_constants.h hyp-constants.o
define rule_gen_hyp_constants
$(call filechk,offsets,__HYP_CONSTANTS_H__)
endef
CFLAGS_hyp-constants.o = -I $(src)/hyp/include
-$(obj)/hyp-constants.s: $(src)/hyp/hyp-constants.c FORCE
- $(call if_changed_dep,cc_s_c)
-$(obj)/hyp_constants.h: $(obj)/hyp-constants.s FORCE
+$(obj)/hyp-constants.o: $(src)/hyp/hyp-constants.c FORCE
+ $(call if_changed_dep,cc_o_c)
+
+$(obj)/hyp_constants.h: $(obj)/hyp-constants.o FORCE
$(call if_changed_rule,gen_hyp_constants)
obj-kvm := $(addprefix $(obj)/, $(kvm-y))
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 5494669a055a6..3b561c7e7c4f9 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -42,8 +42,8 @@ $(obj)/svm/vmenter.o: $(obj)/kvm-asm-offsets.h
AFLAGS_vmx/vmenter.o := -iquote $(obj)
$(obj)/vmx/vmenter.o: $(obj)/kvm-asm-offsets.h
-$(obj)/kvm-asm-offsets.h: $(obj)/kvm-asm-offsets.s FORCE
+$(obj)/kvm-asm-offsets.h: $(obj)/kvm-asm-offsets.o FORCE
$(call filechk,offsets,__KVM_ASM_OFFSETS_H__)
-targets += kvm-asm-offsets.s
+targets += kvm-asm-offsets.o
clean-files += kvm-asm-offsets.h
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
index 36e67fc97c22f..6563503d4b25d 100644
--- a/arch/x86/um/Makefile
+++ b/arch/x86/um/Makefile
@@ -38,11 +38,11 @@ subarch-$(CONFIG_MODULES) += ../kernel/module.o
USER_OBJS := bugs_$(BITS).o ptrace_user.o fault.o
-$(obj)/user-offsets.s: c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \
+$(obj)/user-offsets.o: c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \
-Iarch/x86/include/generated
-targets += user-offsets.s
+targets += user-offsets.o
-include/generated/user_constants.h: $(obj)/user-offsets.s FORCE
+include/generated/user_constants.h: $(obj)/user-offsets.o FORCE
$(call filechk,offsets,__USER_CONSTANT_H__)
UNPROFILE_OBJS := stub_segv.o
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index d2e6ca9abbe02..efae95f315a12 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -34,8 +34,8 @@ ti-emif-sram-objs := ti-emif-pm.o ti-emif-sram-pm.o
$(obj)/ti-emif-sram-pm.o: $(obj)/ti-emif-asm-offsets.h
-$(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.s FORCE
+$(obj)/ti-emif-asm-offsets.h: $(obj)/emif-asm-offsets.o FORCE
$(call filechk,offsets,__TI_EMIF_ASM_OFFSETS_H__)
-targets += emif-asm-offsets.s
+targets += emif-asm-offsets.o
clean-files += ti-emif-asm-offsets.h
diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h
index e7be517aaaf68..d253ae4dfd1c1 100644
--- a/include/linux/kbuild.h
+++ b/include/linux/kbuild.h
@@ -2,15 +2,22 @@
#ifndef __LINUX_KBUILD_H
#define __LINUX_KBUILD_H
-#define DEFINE(sym, val) \
- asm volatile("\n.ascii \"->" #sym " %0 " #val "\"" : : "i" (val))
+#define _LINE(x, ...) \
+ asm volatile( \
+ ".pushsection \".data.kbuild\"; "\
+ ".ascii \"" x "\\n\"; "\
+ ".popsection" : : __VA_ARGS__)
-#define BLANK() asm volatile("\n.ascii \"->\"" : : )
+#define DEFINE(sym, val) \
+ _LINE("#define " #sym " %c0 /* " #val " */", "i" (val))
#define OFFSET(sym, str, mem) \
DEFINE(sym, offsetof(struct str, mem))
+#define BLANK() \
+ _LINE("")
+
#define COMMENT(x) \
- asm volatile("\n.ascii \"->#" x "\"")
+ _LINE("/* " #x " */")
#endif
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 3e003dd6bea09..a5d86ac8f5f57 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -270,10 +270,10 @@ $(LIBBPF_OUTPUT) $(BPFTOOL_OUTPUT):
$(call msg,MKDIR,$@)
$(Q)mkdir -p $@
-$(obj)/syscall_nrs.h: $(obj)/syscall_nrs.s FORCE
+$(obj)/syscall_nrs.h: $(obj)/syscall_nrs.o FORCE
$(call filechk,offsets,__SYSCALL_NRS_H__)
-targets += syscall_nrs.s
+targets += syscall_nrs.o
clean-files += syscall_nrs.h
FORCE:
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 207325eaf1d1c..f78b0b12ace26 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -583,17 +583,6 @@ quiet_cmd_zstd22_with_size = ZSTD22 $@
# ASM offsets
# ---------------------------------------------------------------------------
-# Default sed regexp - multiline due to syntax constraints
-#
-# Use [:space:] because LLVM's integrated assembler inserts <tab> around
-# the .ascii directive whereas GCC keeps the <space> as-is.
-define sed-offsets
- 's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
- /^->/{s:->#\(.*\):/* \1 */:; \
- s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
- s:->::; p;}'
-endef
-
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
@@ -605,7 +594,7 @@ define filechk_offsets
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
- sed -ne $(sed-offsets) < $<; \
+ $(OBJCOPY) -j .data.kbuild -O binary $< /dev/stdout | cat; \
echo ""; \
echo "#endif"
endef
diff --git a/scripts/mod/Makefile b/scripts/mod/Makefile
index c729bc936bae1..3c3f5e16a30a2 100644
--- a/scripts/mod/Makefile
+++ b/scripts/mod/Makefile
@@ -8,10 +8,10 @@ modpost-objs := modpost.o file2alias.o sumversion.o symsearch.o
devicetable-offsets-file := devicetable-offsets.h
-$(obj)/$(devicetable-offsets-file): $(obj)/devicetable-offsets.s FORCE
+$(obj)/$(devicetable-offsets-file): $(obj)/devicetable-offsets.o FORCE
$(call filechk,offsets,__DEVICETABLE_OFFSETS_H__)
-targets += $(devicetable-offsets-file) devicetable-offsets.s
+targets += $(devicetable-offsets-file) devicetable-offsets.o
# dependencies on generated files need to be listed explicitly
--
2.34.1
More information about the linux-um
mailing list