[PATCH v10 00/41] virtio pci support VIRTIO_F_RING_RESET
Michael S. Tsirkin
mst at redhat.com
Fri Jun 24 00:00:12 PDT 2022
On Fri, Jun 24, 2022 at 10:55:40AM +0800, Xuan Zhuo wrote:
> The virtio spec already supports the virtio queue reset function. This patch set
> is to add this function to the kernel. The relevant virtio spec information is
> here:
>
> https://github.com/oasis-tcs/virtio-spec/issues/124
> https://github.com/oasis-tcs/virtio-spec/issues/139
>
> Also regarding MMIO support for queue reset, I plan to support it after this
> patch is passed.
>
> This patch set implements the refactoring of vring. Finally, the
> virtuque_resize() interface is provided based on the reset function of the
> transport layer.
>
> Test environment:
> Host: 4.19.91
> Qemu: QEMU emulator version 6.2.50 (with vq reset support)
> Test Cmd: ethtool -G eth1 rx $1 tx $2; ethtool -g eth1
>
> The default is split mode, modify Qemu virtio-net to add PACKED feature to test
> packed mode.
>
> Qemu code:
> https://github.com/fengidri/qemu/compare/89f3bfa3265554d1d591ee4d7f1197b6e3397e84...master
Pls rebase on top of my latest tree, there are some conflicts.
> In order to simplify the review of this patch set, the function of reusing
> the old buffers after resize will be introduced in subsequent patch sets.
>
> Please review. Thanks.
>
> v10:
> 1. on top of the harden vring IRQ
> 2. factor out split and packed from struct vring_virtqueue
> 3. some suggest from @Jason Wang
>
> v9:
> 1. Provide a virtqueue_resize() interface directly
> 2. A patch set including vring resize, virtio pci reset, virtio-net resize
> 3. No more separate structs
>
> v8:
> 1. Provide a virtqueue_reset() interface directly
> 2. Split the two patch sets, this is the first part
> 3. Add independent allocation helper for allocating state, extra
>
> v7:
> 1. fix #6 subject typo
> 2. fix #6 ring_size_in_bytes is uninitialized
> 3. check by: make W=12
>
> v6:
> 1. virtio_pci: use synchronize_irq(irq) to sync the irq callbacks
> 2. Introduce virtqueue_reset_vring() to implement the reset of vring during
> the reset process. May use the old vring if num of the vq not change.
> 3. find_vqs() support sizes to special the max size of each vq
>
> v5:
> 1. add virtio-net support set_ringparam
>
> v4:
> 1. just the code of virtio, without virtio-net
> 2. Performing reset on a queue is divided into these steps:
> 1. reset_vq: reset one vq
> 2. recycle the buffer from vq by virtqueue_detach_unused_buf()
> 3. release the ring of the vq by vring_release_virtqueue()
> 4. enable_reset_vq: re-enable the reset queue
> 3. Simplify the parameters of enable_reset_vq()
> 4. add container structures for virtio_pci_common_cfg
>
> v3:
> 1. keep vq, irq unreleased
>
> *** BLURB HERE ***
>
> Xuan Zhuo (41):
> remoteproc: rename len of rpoc_vring to num
> virtio: add helper virtqueue_get_vring_max_size()
> virtio: struct virtio_config_ops add callbacks for queue_reset
> virtio_ring: update the document of the virtqueue_detach_unused_buf
> for queue reset
> virtio_ring: remove the arg vq of vring_alloc_desc_extra()
> virtio_ring: extract the logic of freeing vring
> virtio_ring: split vring_virtqueue
> virtio_ring: introduce virtqueue_init()
> virtio_ring: split: introduce vring_free_split()
> virtio_ring: split: extract the logic of alloc queue
> virtio_ring: split: extract the logic of alloc state and extra
> virtio_ring: split: extract the logic of attach vring
> virtio_ring: split: extract the logic of vring init
> virtio_ring: split: introduce virtqueue_reinit_split()
> virtio_ring: split: reserve vring_align, may_reduce_num
> virtio_ring: split: introduce virtqueue_resize_split()
> virtio_ring: packed: introduce vring_free_packed
> virtio_ring: packed: extract the logic of alloc queue
> virtio_ring: packed: extract the logic of alloc state and extra
> virtio_ring: packed: extract the logic of attach vring
> virtio_ring: packed: extract the logic of vring init
> virtio_ring: packed: introduce virtqueue_reinit_packed()
> virtio_ring: packed: introduce virtqueue_resize_packed()
> virtio_ring: introduce virtqueue_resize()
> virtio_pci: struct virtio_pci_common_cfg add queue_notify_data
> virtio: queue_reset: add VIRTIO_F_RING_RESET
> virtio: allow to unbreak/break virtqueue individually
> virtio_pci: update struct virtio_pci_common_cfg
> virtio_pci: introduce helper to get/set queue reset
> virtio_pci: extract the logic of active vq for modern pci
> virtio_pci: support VIRTIO_F_RING_RESET
> virtio: find_vqs() add arg sizes
> virtio_pci: support the arg sizes of find_vqs()
> virtio_mmio: support the arg sizes of find_vqs()
> virtio: add helper virtio_find_vqs_ctx_size()
> virtio_net: set the default max ring size by find_vqs()
> virtio_net: get ringparam by virtqueue_get_vring_max_size()
> virtio_net: split free_unused_bufs()
> virtio_net: support rx queue resize
> virtio_net: support tx queue resize
> virtio_net: support set_ringparam
>
> arch/um/drivers/virtio_uml.c | 3 +-
> drivers/net/virtio_net.c | 209 +++++-
> drivers/platform/mellanox/mlxbf-tmfifo.c | 3 +
> drivers/remoteproc/remoteproc_core.c | 4 +-
> drivers/remoteproc/remoteproc_virtio.c | 13 +-
> drivers/s390/virtio/virtio_ccw.c | 4 +
> drivers/virtio/virtio_mmio.c | 11 +-
> drivers/virtio/virtio_pci_common.c | 32 +-
> drivers/virtio/virtio_pci_common.h | 3 +-
> drivers/virtio/virtio_pci_legacy.c | 8 +-
> drivers/virtio/virtio_pci_modern.c | 157 ++++-
> drivers/virtio/virtio_pci_modern_dev.c | 39 ++
> drivers/virtio/virtio_ring.c | 794 +++++++++++++++++------
> drivers/virtio/virtio_vdpa.c | 3 +
> include/linux/remoteproc.h | 4 +-
> include/linux/virtio.h | 9 +
> include/linux/virtio_config.h | 38 +-
> include/linux/virtio_pci_modern.h | 2 +
> include/uapi/linux/virtio_config.h | 7 +-
> include/uapi/linux/virtio_pci.h | 14 +
> 20 files changed, 1063 insertions(+), 294 deletions(-)
>
> --
> 2.31.0
More information about the linux-um
mailing list