[PATCH 02/30] ARM: kexec: Disable IRQs/FIQs also on crash CPUs shutdown path

[Marc Zyngier]

On Fri, 29 Apr 2022 22:45:14 +0100,
"Russell King (Oracle)" <linux at armlinux.org.uk> wrote:
> 
> On Fri, Apr 29, 2022 at 06:38:19PM -0300, Guilherme G. Piccoli wrote:
> > Thanks Marc and Michael for the review/discussion.
> > 
> > On 29/04/2022 15:20, Marc Zyngier wrote:
> > > [...]
> > 
> > > My expectations would be that, since we're getting here using an IPI,
> > > interrupts are already masked. So what reenabled them the first place?
> > > 
> > > Thanks,
> > > 
> > > 	M.
> > > 
> > 
> > Marc, I did some investigation in the code (and tried/failed in the ARM
> > documentation as well heh), but this is still not 100% clear for me.
> > 
> > You're saying IPI calls disable IRQs/FIQs by default in the the target
> > CPUs? Where does it happen? I'm a bit confused if this a processor
> > mechanism, or it's in code.
> 
> When we taken an IRQ, IRQs will be masked, FIQs will not. IPIs are
> themselves interrupts, so IRQs will be masked while the IPI is being
> processed. Therefore, there should be no need to re-disable the
> already disabled interrupts.
> 
> > But crash_smp_send_stop() is different, it seems to IPI the other CPUs
> > with the flag IPI_CALL_FUNC, which leads to calling
> > generic_smp_call_function_interrupt() - does it disable interrupts/FIQs
> > as well? I couldn't find it.
> 
> It's buried in the architecture behaviour. When the CPU takes an
> interrupt and jumps to the interrupt vector in the vectors page, it is
> architecturally defined that interrupts will be disabled. If they
> weren't architecturally disabled at this point, then as soon as the
> first instruction is processed (at the interrupt vector, likely a
> branch) the CPU would immediately take another jump to the interrupt
> vector, and this process would continue indefinitely, making interrupt
> handling utterly useless.
> 
> So, you won't find an explicit instruction in the code path from the
> vectors to the IPI handler that disables interrupts - because it's
> written into the architecture that this is what must happen.
> 
> IRQs are a lower priority than FIQs, so FIQs remain unmasked.

Ah, you're of course right. That's one of the huge differences between
AArch32 and AArch64, where the former has per target mode masking
rules, and the later masks everything on entry...

	M.

-- 
Without deviation from the norm, progress is not possible.