early console in setup code
early console in extract_kernel
input_data: 0x022d8094
input_len: 0x00e9b665
output: 0x01000000
output_len: 0x01e6b964
kernel_total_size: 0x02579000
needed_size: 0x02579000

Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel (entry_offset: 0x00000080).
[    0.000000][    T0] Linux version 6.3.0-rc5-00613-gc31fe5eb2ec6 (kbuild@512d3e973ecc) (gcc-11 (Debian 11.3.0-8) 11.3.0, GNU ld (GNU Binutils for Debian) 2.39.90.20221231) #42 SMP Fri Apr 14 19:24:22 CST 2023
[    0.000000][    T0] KERNEL supported cpus:
[    0.000000][    T0]   Intel GenuineIntel
[    0.000000][    T0]   Transmeta GenuineTMx86
[    0.000000][    T0]   Transmeta TransmetaCPU
[    0.000000][    T0]   UMC UMC UMC UMC
[    0.000000][    T0]   Vortex Vortex86 SoC
[    0.000000][    T0] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000][    T0] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000][    T0] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000][    T0] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000][    T0] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000][    T0] signal: max sigframe size: 1760
[    0.000000][    T0] BIOS-provided physical RAM map:
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000][    T0] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
[    0.000000][    T0] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000][    T0] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] usable
[    0.000000][    T0] printk: debug: ignoring loglevel setting.
[    0.000000][    T0] printk: bootconsole [earlyser0] enabled
[    0.000000][    T0] e820: remove [mem 0x100000000-0xfffffffffffffffe] usable
[    0.000000][    T0] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000][    T0] user-defined physical RAM map:
[    0.000000][    T0] user: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000][    T0] user: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000][    T0] user: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000][    T0] user: [mem 0x0000000000100000-0x00000000bffdffff] usable
[    0.000000][    T0] user: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000][    T0] user: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000][    T0] user: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000][    T0] Hypervisor detected: KVM
[    0.000000][    T0] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000012][    T0] kvm-clock: using sched offset of 3329522727 cycles
[    0.001342][    T0] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.003440][    T0] tsc: Detected 2194.916 MHz processor
[    0.004000][    T0] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.004000][    T0] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.004000][    T0] last_pfn = 0xbffe0 max_arch_pfn = 0x100000
[    0.004000][    T0] x86/PAT: PAT support disabled because CONFIG_X86_PAT is disabled in the kernel.
[    0.004000][    T0] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.004000][    T0] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.004000][    T0] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.004000][    T0] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.004000][    T0] found SMP MP-table at [mem 0x000f5ba0-0x000f5baf]
[    0.004000][    T0]   mpc: f5bb0-f5c80
[    0.004000][    T0] initial memory mapped: [mem 0x00000000-0x037fffff]
[    0.004000][    T0] RAMDISK: [mem 0x7f773000-0x7fffffff]
[    0.004000][    T0] Allocated new RAMDISK: [mem 0x2db71000-0x2e3fd60e]
[    0.004000][    T0] Move RAMDISK from [mem 0x7f773000-0x7ffff60e] to [mem 0x2db71000-0x2e3fd60e]
[    0.004000][    T0] ACPI: Early table checksum verification disabled
[    0.004000][    T0] ACPI: RSDP 0x00000000000F59B0 000014 (v00 BOCHS )
[    0.004000][    T0] ACPI: RSDT 0x00000000BFFE198D 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: FACP 0x00000000BFFE1839 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: DSDT 0x00000000BFFE0040 0017F9 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: FACS 0x00000000BFFE0000 000040
[    0.004000][    T0] ACPI: APIC 0x00000000BFFE18AD 000080 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: HPET 0x00000000BFFE192D 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: WAET 0x00000000BFFE1965 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004000][    T0] ACPI: Reserving FACP table memory at [mem 0xbffe1839-0xbffe18ac]
[    0.004000][    T0] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe1838]
[    0.004000][    T0] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[    0.004000][    T0] ACPI: Reserving APIC table memory at [mem 0xbffe18ad-0xbffe192c]
[    0.004000][    T0] ACPI: Reserving HPET table memory at [mem 0xbffe192d-0xbffe1964]
[    0.004000][    T0] ACPI: Reserving WAET table memory at [mem 0xbffe1965-0xbffe198c]
[    0.004000][    T0] mapped APIC to         ffffc000 (        fee00000)
[    0.004000][    T0] 2331MB HIGHMEM available.
[    0.004000][    T0] 739MB LOWMEM available.
[    0.004000][    T0]   mapped low ram: 0 - 2e3fe000
[    0.004000][    T0]   low ram: 0 - 2e3fe000
[    0.004000][    T0] Zone ranges:
[    0.004000][    T0]   DMA      empty
[    0.004000][    T0]   Normal   empty
[    0.004000][    T0]   HighMem  [mem 0x0000000000001000-0x00000000bffdffff]
[    0.004000][    T0] Movable zone start for each node
[    0.004000][    T0] Early memory node ranges
[    0.004000][    T0]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.004000][    T0]   node   0: [mem 0x0000000000100000-0x00000000bffdffff]
[    0.004000][    T0] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffdffff]
[    0.004000][    T0] On node 0, zone HighMem: 1 pages in unavailable ranges
[    0.004000][    T0] On node 0, zone HighMem: 97 pages in unavailable ranges
[    0.004000][    T0] Using APIC driver default
[    0.004000][    T0] ACPI: PM-Timer IO Port: 0x608
[    0.004000][    T0] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004000][    T0] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004000][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.004000][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004000][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.004000][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004000][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.004000][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004000][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.004000][    T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004000][    T0] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.004000][    T0] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.004000][    T0] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004000][    T0] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004000][    T0] TSC deadline timer available
[    0.004000][    T0] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.004000][    T0] mapped IOAPIC to ffffb000 (fec00000)
[    0.004000][    T0] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.004000][    T0] Booting paravirtualized kernel on KVM
[    0.004000][    T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.004000][    T0] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.004000][    T0] percpu: Embedded 31 pages/cpu s97748 r0 d29228 u126976
[    0.004000][    T0] pcpu-alloc: s97748 r0 d29228 u126976 alloc=31*4096
[    0.004000][    T0] pcpu-alloc: [0] 0 [0] 1 
[    0.004000][    T0] kvm-guest: PV spinlocks disabled, no host support
[    0.004000][    T0] Kernel command line: ip=::::vm-meta-200::dhcp root=/dev/ram0 RESULT_ROOT=/result/boot/1/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/3 BOOT_IMAGE=/pkg/linux/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/vmlinuz-6.3.0-rc5-00613-gc31fe5eb2ec6 branch=linux-review/Arnd-Bergmann/mm-make-arch_has_descending_max_zone_pfns-static/20230414-160608 job=/lkp/jobs/scheduled/vm-meta-200/boot-1-yocto-i386-minimal-20190520.cgz-c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3-20230414-28113-rtywi9-3.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-a015-20230410 commit=c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3 initcall_debug mem=4G nmi_watchdog=0 vmalloc=256M initramfs_async=0 page_owner=on max_uptime=600 LKP_SERVER=internal-lkp-server selinux=0 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramd
[    0.004000][    T0] sysrq: sysrq always enabled.
[    0.004000][    T0] ignoring the deprecated load_ramdisk= option
[    0.004000][    T0] Unknown kernel command line parameters "RESULT_ROOT=/result/boot/1/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/3 BOOT_IMAGE=/pkg/linux/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/vmlinuz-6.3.0-rc5-00613-gc31fe5eb2ec6 branch=linux-review/Arnd-Bergmann/mm-make-arch_has_descending_max_zone_pfns-static/20230414-160608 job=/lkp/jobs/scheduled/vm-meta-200/boot-1-yocto-i386-minimal-20190520.cgz-c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3-20230414-28113-rtywi9-3.yaml user=lkp ARCH=i386 kconfig=i386-randconfig-a015-20230410 commit=c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3 nmi_watchdog=panic max_uptime=600 LKP_SERVER=internal-lkp-server selinux=0 softlockup_panic=1 prompt_ramdisk=0 vga=normal", will be passed to user space.
[    0.004000][    T0] Dentry cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.004000][    T0] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.004000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 786302
[    0.004000][    T0] allocated 47245380 bytes of page_ext
[    0.004000][    T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.004000][    T0] stackdepot: allocating hash table via alloc_large_system_hash
[    0.004000][    T0] stackdepot hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.004000][    T0] Initializing HighMem for node 0 (00000001:000bffe0)
[    0.004000][    T0] Initializing Movable for node 0 (00000000:00000000)
[    0.004000][    T0] list_add double add: new=ec373004, prev=ec373004, next=c2ba2b20.
[    0.004000][    T0] ------------[ cut here ]------------
[    0.004000][    T0] kernel BUG at lib/list_debug.c:33!
[    0.004000][    T0] invalid opcode: 0000 [#1] SMP
[    0.004000][    T0] CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc5-00613-gc31fe5eb2ec6 #42
[    0.004000][    T0] EIP: __list_add_valid+0x88/0xa1
[    0.004000][    T0] Code: 56 51 68 78 b0 4c c2 e8 39 c7 de ff 0f 0b b8 f4 60 a4 c2 eb 1c 39 d3 74 04 39 f3 75 19 51 50 53 68 ca b0 4c c2 e8 1b c7 de ff <0f> 0b b8 e8 60 a4 c2 e8 be 71 06 00 8d 65 f8 b0 01 5b 5e 5d 31 d2
[    0.004000][    T0] EAX: 00000040 EBX: ec373004 ECX: 00000000 EDX: 00000000
[    0.004000][    T0] ESI: c2ba2b20 EDI: ec373004 EBP: c2689e94 ESP: c2689e7c
[    0.004000][    T0] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00210046
[    0.004000][    T0] CR0: 80050033 CR2: 00000000 CR3: 02c7d000 CR4: 00040690
[    0.004000][    T0] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    0.004000][    T0] DR6: fffe0ff0 DR7: 00000400
[    0.004000][    T0] Call Trace:
[    0.004000][    T0]  list_add_tail+0x16/0x2f
[    0.004000][    T0]  __free_one_page+0x151/0x1be
[    0.004000][    T0]  __free_pages_ok+0x293/0x2d3
[    0.004000][    T0]  __free_pages_core+0x81/0x8d
[    0.004000][    T0]  memblock_free_pages+0xa/0x12
[    0.004000][    T0]  memblock_free_all+0x150/0x1c0
[    0.004000][    T0]  mem_init+0x27/0x131
[    0.004000][    T0]  mm_core_init+0xf7/0x2cd
[    0.004000][    T0]  ? cpu_init+0x11d/0x127
[    0.004000][    T0]  start_kernel+0x14d/0x36d
[    0.004000][    T0]  i386_start_kernel+0x43/0x47
[    0.004000][    T0]  startup_32_smp+0x156/0x158
[    0.004000][    T0] Modules linked in:
[    0.004000][    T0] ---[ end trace 0000000000000000 ]---
[    0.004000][    T0] EIP: __list_add_valid+0x88/0xa1
[    0.004000][    T0] Code: 56 51 68 78 b0 4c c2 e8 39 c7 de ff 0f 0b b8 f4 60 a4 c2 eb 1c 39 d3 74 04 39 f3 75 19 51 50 53 68 ca b0 4c c2 e8 1b c7 de ff <0f> 0b b8 e8 60 a4 c2 e8 be 71 06 00 8d 65 f8 b0 01 5b 5e 5d 31 d2
[    0.004000][    T0] EAX: 00000040 EBX: ec373004 ECX: 00000000 EDX: 00000000
[    0.004000][    T0] ESI: c2ba2b20 EDI: ec373004 EBP: c2689e94 ESP: c2689e7c
[    0.004000][    T0] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00210046
[    0.004000][    T0] CR0: 80050033 CR2: 00000000 CR3: 02c7d000 CR4: 00040690
[    0.004000][    T0] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    0.004000][    T0] DR6: fffe0ff0 DR7: 00000400
[    0.004000][    T0] Kernel panic - not syncing: Fatal exception

Kboot worker: lkp-worker32
Elapsed time: 60

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu SandyBridge
	-kernel $kernel
	-initrd initrd-vm-meta-200.cgz
	-m 16384
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0,hostfwd=tcp::32032-:22
	-boot order=nc
	-no-reboot
	-device i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-meta-200::dhcp
	root=/dev/ram0
	RESULT_ROOT=/result/boot/1/vm-snb/yocto-i386-minimal-20190520.cgz/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/3
	BOOT_IMAGE=/pkg/linux/i386-randconfig-a015-20230410/gcc-11/c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3/vmlinuz-6.3.0-rc5-00613-gc31fe5eb2ec6
	branch=linux-review/Arnd-Bergmann/mm-make-arch_has_descending_max_zone_pfns-static/20230414-160608
	job=/job-script
	user=lkp
	ARCH=i386
	kconfig=i386-randconfig-a015-20230410
	commit=c31fe5eb2ec68f6d2331fabc924e0030cc6bb2b3
	initcall_debug
	mem=4G
	nmi_watchdog=0
	vmalloc=256M
	initramfs_async=0
	page_owner=on
	max_uptime=600
	result_service=tmpfs
	selinux=0
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	mem=4G
	rcuperf.shutdown=0
	watchdog_thresh=240
)

"${kvm[@]}" -append "${append[*]}"
