[PATCH 06/21] powerpc: dma-mapping: minimize for_cpu flushing

[Christophe Leroy]

Le 27/03/2023 à 14:13, Arnd Bergmann a écrit :
> From: Arnd Bergmann <arnd at arndb.de>
> 
> The powerpc dma_sync_*_for_cpu() variants do more flushes than on other
> architectures. Reduce it to what everyone else does:
> 
>   - No flush is needed after data has been sent to a device
> 
>   - When data has been received from a device, the cache only needs to
>     be invalidated to clear out cache lines that were speculatively
>     prefetched.
> 
> In particular, the second flushing of partial cache lines of bidirectional
> buffers is actively harmful -- if a single cache line is written by both
> the CPU and the device, flushing it again does not maintain coherency
> but instead overwrite the data that was just received from the device.

Hum ..... Who is right ?

That behaviour was introduced by commit 03d70617b8a7 ("powerpc: Prevent 
memory corruption due to cache invalidation of unaligned DMA buffer")

I think your commit log should explain why that commit was wrong, and 
maybe say that your patch is a revert of that commit ?

Christophe


> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---
>   arch/powerpc/mm/dma-noncoherent.c | 18 ++++--------------
>   1 file changed, 4 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
> index f10869d27de5..e108cacf877f 100644
> --- a/arch/powerpc/mm/dma-noncoherent.c
> +++ b/arch/powerpc/mm/dma-noncoherent.c
> @@ -132,21 +132,11 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
>   	switch (direction) {
>   	case DMA_NONE:
>   		BUG();
> -	case DMA_FROM_DEVICE:
> -		/*
> -		 * invalidate only when cache-line aligned otherwise there is
> -		 * the potential for discarding uncommitted data from the cache
> -		 */
> -		if ((start | end) & (L1_CACHE_BYTES - 1))
> -			__dma_phys_op(start, end, DMA_CACHE_FLUSH);
> -		else
> -			__dma_phys_op(start, end, DMA_CACHE_INVAL);
> -		break;
> -	case DMA_TO_DEVICE:		/* writeback only */
> -		__dma_phys_op(start, end, DMA_CACHE_CLEAN);
> +	case DMA_TO_DEVICE:
>   		break;
> -	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
> -		__dma_phys_op(start, end, DMA_CACHE_FLUSH);
> +	case DMA_FROM_DEVICE:
> +	case DMA_BIDIRECTIONAL:
> +		__dma_phys_op(start, end, DMA_CACHE_INVAL);
>   		break;
>   	}
>   }