[PATCH 1/2] ARC: fp: (micro)optimize FPU_STATUS read by eliding FWE bit clearing
Vineet Gupta
Vineet.Gupta1 at synopsys.com
Tue Jul 20 13:57:59 PDT 2021
Any FPU_STATUS write needs setting the FWE bit (31) whcih just provides
a "control signal" to enable explicit write (vs. the side-effect of FPU
instructions). However this bit is RAZ and write-only, thus effectively
never stored in FPU_STATUS register. Thus when reading the register
there is no need to clear it. This shaves off a BCLR instruction from
the fe*exceptino family of functions and while no big deal still makes
sense to do.
This came up when debugging a race in math/test-fenv-tls [1]
[1]: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/54
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
---
sysdeps/arc/fpu_control.h | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/sysdeps/arc/fpu_control.h b/sysdeps/arc/fpu_control.h
index c7d101e7838f..ae4348321c16 100644
--- a/sysdeps/arc/fpu_control.h
+++ b/sysdeps/arc/fpu_control.h
@@ -81,21 +81,20 @@ typedef unsigned int fpu_control_t;
# define _FPU_SETCW(cw) __asm__ volatile ("sr %0, [0x300]" : : "r" (cw))
/* Macros for accessing the hardware status word.
- FWE bit is special as it controls if actual status bits could be wrritten
- explicitly (other than FPU instructions). We handle it here to keep the
- callers agnostic of it:
- - clear it out when reporting status bits
- - always set it when changing status bits. */
+ Writing to FPU_STATUS requires a "control" bit FWE to be able to set the
+ exception flags directly (as opposed to side-effects of FP instructions).
+ That is done in the macro here to keeps callers agnostic of this detail.
+ And given FWE is write-only and RAZ, no need to "clear" it in _FPU_GETS
+ macro. */
# define _FPU_GETS(cw) \
__asm__ volatile ("lr %0, [0x301] \r\n" \
- "bclr %0, %0, 31 \r\n" \
: "=r" (cw))
# define _FPU_SETS(cw) \
do { \
- unsigned int __tmp = 0x80000000 | (cw); \
+ unsigned int __fwe = 0x80000000 | (cw); \
__asm__ volatile ("sr %0, [0x301] \r\n" \
- : : "r" (__tmp)); \
+ : : "r" (__fwe)); \
} while (0)
/* Default control word set at startup. */
--
2.25.1
More information about the linux-snps-arc
mailing list