[PATCH 02/18] ARC: mm: remove tlb paranoid code
Vineet Gupta
vgupta at kernel.org
Tue Aug 10 17:42:42 PDT 2021
This was used way back when in arc700 debugging when ASID allocator was
still bit flaky. Not needed in last 5 years
Signed-off-by: Vineet Gupta <vgupta at kernel.com>
Signed-off-by: Vineet Gupta <vgupta at kernel.org>
---
arch/arc/Kconfig | 3 ---
arch/arc/include/asm/mmu.h | 6 -----
arch/arc/mm/tlb.c | 40 ------------------------------
arch/arc/mm/tlbex.S | 50 --------------------------------------
4 files changed, 99 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 0680b1de0fc3..59d5b2a179f6 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -537,9 +537,6 @@ config ARC_DW2_UNWIND
If you don't debug the kernel, you can say N, but we may not be able
to solve problems without frame unwind information
-config ARC_DBG_TLB_PARANOIA
- bool "Paranoia Checks in Low Level TLB Handlers"
-
config ARC_DBG_JUMP_LABEL
bool "Paranoid checks in Static Keys (jump labels) code"
depends on JUMP_LABEL
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 4065335a7922..38a036508699 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -64,12 +64,6 @@ typedef struct {
unsigned long asid[NR_CPUS]; /* 8 bit MMU PID + Generation cycle */
} mm_context_t;
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
-#else
-#define tlb_paranoid_check(a, b)
-#endif
-
void arc_mmu_init(void);
extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
void read_decode_mmu_bcr(void);
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 349fb7a75d1d..6079dfd129b9 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -400,7 +400,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
*
* Removing the assumption involves
* -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg.
- * -Fix the TLB paranoid debug code to not trigger false negatives.
* -More importantly it makes this handler inconsistent with fast-path
* TLB Refill handler which always deals with "current"
*
@@ -423,8 +422,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
local_irq_save(flags);
- tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr);
-
vaddr &= PAGE_MASK;
/* update this PTE credentials */
@@ -818,40 +815,3 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
local_irq_restore(flags);
}
-
-/***********************************************************************
- * Diagnostic Routines
- * -Called from Low Level TLB Handlers if things don;t look good
- **********************************************************************/
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-/*
- * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS
- * don't match
- */
-void print_asid_mismatch(int mm_asid, int mmu_asid, int is_fast_path)
-{
- pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n",
- is_fast_path ? "Fast" : "Slow", mm_asid, mmu_asid);
-
- __asm__ __volatile__("flag 1");
-}
-
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long addr)
-{
- unsigned int mmu_asid;
-
- mmu_asid = read_aux_reg(ARC_REG_PID) & 0xff;
-
- /*
- * At the time of a TLB miss/installation
- * - HW version needs to match SW version
- * - SW needs to have a valid ASID
- */
- if (addr < 0x70000000 &&
- ((mm_asid == MM_CTXT_NO_ASID) ||
- (mmu_asid != (mm_asid & MM_CTXT_ASID_MASK))))
- print_asid_mismatch(mm_asid, mmu_asid, 0);
-}
-#endif
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index bcd2909c691f..0b4bb62fa0ab 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -93,11 +93,6 @@ ex_saved_reg1:
st_s r1, [r0, 4]
st_s r2, [r0, 8]
st_s r3, [r0, 12]
-
- ; VERIFY if the ASID in MMU-PID Reg is same as
- ; one in Linux data structures
-
- tlb_paranoid_check_asm
.endm
.macro TLBMISS_RESTORE_REGS
@@ -146,51 +141,6 @@ ex_saved_reg1:
#endif
-;============================================================================
-; Troubleshooting Stuff
-;============================================================================
-
-; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
-; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
-; we use the MMU PID Reg to get current ASID.
-; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
-; So we try to detect this in TLB Mis shandler
-
-.macro tlb_paranoid_check_asm
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
- GET_CURR_TASK_ON_CPU r3
- ld r0, [r3, TASK_ACT_MM]
- ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
- breq r0, 0, 55f ; Error if no ASID allocated
-
- lr r1, [ARC_REG_PID]
- and r1, r1, 0xFF
-
- and r2, r0, 0xFF ; MMU PID bits only for comparison
- breq r1, r2, 5f
-
-55:
- ; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
- lr r2, [erstatus]
- bbit0 r2, STATUS_U_BIT, 5f
-
- ; We sure are in troubled waters, Flag the error, but to do so
- ; need to switch to kernel mode stack to call error routine
- GET_TSK_STACK_BASE r3, sp
-
- ; Call printk to shoutout aloud
- mov r2, 1
- j print_asid_mismatch
-
-5: ; ASIDs match so proceed normally
- nop
-
-#endif
-
-.endm
-
;============================================================================
;TLB Miss handling Code
;============================================================================
--
2.25.1
More information about the linux-snps-arc
mailing list