[PATCH AUTOSEL 4.14 13/17] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id

[Sasha Levin]

From: Evgeniy Didin <Evgeniy.Didin at synopsys.com>

[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin at synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
Cc: Alexey Brodkin <abrodkin at synopsys.com>
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arc/boot/dts/hsdk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index aeacea148793c..75aa3a8f9fdc9 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -163,7 +163,7 @@ ethernet at 8000 {
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
@@ -179,7 +179,7 @@ mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy at 0 {
+				phy0: ethernet-phy at 0 { /* Micrel KSZ9031 */
 					reg = <0>;
 					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-- 
2.25.1