[PATCH 2/3] drivers/irqchip: Remove EZChip NPS interrupt controller

[Vineet Gupta]

On 11/5/20 1:22 PM, Vineet Gupta wrote:
> NPS platform has been removed from ARC port and there are no in-tree
> users of it now. So RIP !
> 
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Marc Zyngier <maz at kernel.org>
> Cc: linux-kernel at vger.kernel.org
> Signed-off-by: Vineet Gupta <vgupta at synopsys.com>

Ping !

> ---
>   drivers/irqchip/Kconfig     |   7 --
>   drivers/irqchip/Makefile    |   1 -
>   drivers/irqchip/irq-eznps.c | 165 ------------------------------------
>   3 files changed, 173 deletions(-)
>   delete mode 100644 drivers/irqchip/irq-eznps.c
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index c6098eee0c7c..7920c3a3017d 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -389,13 +389,6 @@ config LS_SCFG_MSI
>   config PARTITION_PERCPU
>   	bool
>   
> -config EZNPS_GIC
> -	bool "NPS400 Global Interrupt Manager (GIM)"
> -	depends on ARC || (COMPILE_TEST && !64BIT)
> -	select IRQ_DOMAIN
> -	help
> -	  Support the EZchip NPS400 global interrupt controller
> -
>   config STM32_EXTI
>   	bool
>   	select IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 94c2885882ee..0ac93bfaec61 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -86,7 +86,6 @@ obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
>   obj-$(CONFIG_MVEBU_SEI)			+= irq-mvebu-sei.o
>   obj-$(CONFIG_LS_EXTIRQ)			+= irq-ls-extirq.o
>   obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
> -obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
>   obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o
>   obj-$(CONFIG_STM32_EXTI) 		+= irq-stm32-exti.o
>   obj-$(CONFIG_QCOM_IRQ_COMBINER)		+= qcom-irq-combiner.o
> diff --git a/drivers/irqchip/irq-eznps.c b/drivers/irqchip/irq-eznps.c
> deleted file mode 100644
> index 2a7a38830a8d..000000000000
> --- a/drivers/irqchip/irq-eznps.c
> +++ /dev/null
> @@ -1,165 +0,0 @@
> -/*
> - * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
> - *
> - * This software is available to you under a choice of one of two
> - * licenses.  You may choose to be licensed under the terms of the GNU
> - * General Public License (GPL) Version 2, available from the file
> - * COPYING in the main directory of this source tree, or the
> - * OpenIB.org BSD license below:
> - *
> - *     Redistribution and use in source and binary forms, with or
> - *     without modification, are permitted provided that the following
> - *     conditions are met:
> - *
> - *      - Redistributions of source code must retain the above
> - *        copyright notice, this list of conditions and the following
> - *        disclaimer.
> - *
> - *      - Redistributions in binary form must reproduce the above
> - *        copyright notice, this list of conditions and the following
> - *        disclaimer in the documentation and/or other materials
> - *        provided with the distribution.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> - * SOFTWARE.
> - */
> -
> -#include <linux/interrupt.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/irq.h>
> -#include <linux/irqdomain.h>
> -#include <linux/irqchip.h>
> -#include <soc/nps/common.h>
> -
> -#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
> -#define NPS_TIMER0_IRQ  3
> -
> -/*
> - * NPS400 core includes an Interrupt Controller (IC) support.
> - * All cores can deactivate level irqs at first level control
> - * at cores mesh layer called MTM.
> - * For devices out side chip e.g. uart, network there is another
> - * level called Global Interrupt Manager (GIM).
> - * This second level can control level and edge interrupt.
> - *
> - * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
> - * with private HW copy per CPU.
> - */
> -
> -static void nps400_irq_mask(struct irq_data *irqd)
> -{
> -	unsigned int ienb;
> -	unsigned int irq = irqd_to_hwirq(irqd);
> -
> -	ienb = read_aux_reg(AUX_IENABLE);
> -	ienb &= ~(1 << irq);
> -	write_aux_reg(AUX_IENABLE, ienb);
> -}
> -
> -static void nps400_irq_unmask(struct irq_data *irqd)
> -{
> -	unsigned int ienb;
> -	unsigned int irq = irqd_to_hwirq(irqd);
> -
> -	ienb = read_aux_reg(AUX_IENABLE);
> -	ienb |= (1 << irq);
> -	write_aux_reg(AUX_IENABLE, ienb);
> -}
> -
> -static void nps400_irq_eoi_global(struct irq_data *irqd)
> -{
> -	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
> -
> -	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
> -
> -	/* Don't ack GIC before all device access attempts are done */
> -	mb();
> -
> -	nps_ack_gic();
> -}
> -
> -static void nps400_irq_ack(struct irq_data *irqd)
> -{
> -	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
> -
> -	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
> -}
> -
> -static struct irq_chip nps400_irq_chip_fasteoi = {
> -	.name		= "NPS400 IC Global",
> -	.irq_mask	= nps400_irq_mask,
> -	.irq_unmask	= nps400_irq_unmask,
> -	.irq_eoi	= nps400_irq_eoi_global,
> -};
> -
> -static struct irq_chip nps400_irq_chip_percpu = {
> -	.name		= "NPS400 IC",
> -	.irq_mask	= nps400_irq_mask,
> -	.irq_unmask	= nps400_irq_unmask,
> -	.irq_ack	= nps400_irq_ack,
> -};
> -
> -static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
> -			  irq_hw_number_t hw)
> -{
> -	switch (hw) {
> -	case NPS_TIMER0_IRQ:
> -#ifdef CONFIG_SMP
> -	case NPS_IPI_IRQ:
> -#endif
> -		irq_set_percpu_devid(virq);
> -		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
> -					 handle_percpu_devid_irq);
> -		break;
> -	default:
> -		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
> -					 handle_fasteoi_irq);
> -		break;
> -	}
> -
> -	return 0;
> -}
> -
> -static const struct irq_domain_ops nps400_irq_ops = {
> -	.xlate = irq_domain_xlate_onecell,
> -	.map = nps400_irq_map,
> -};
> -
> -static int __init nps400_of_init(struct device_node *node,
> -				 struct device_node *parent)
> -{
> -	struct irq_domain *nps400_root_domain;
> -
> -	if (parent) {
> -		pr_err("DeviceTree incore ic not a root irq controller\n");
> -		return -EINVAL;
> -	}
> -
> -	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
> -						   &nps400_irq_ops, NULL);
> -
> -	if (!nps400_root_domain) {
> -		pr_err("nps400 root irq domain not avail\n");
> -		return -ENOMEM;
> -	}
> -
> -	/*
> -	 * Needed for primary domain lookup to succeed
> -	 * This is a primary irqchip, and can never have a parent
> -	 */
> -	irq_set_default_host(nps400_root_domain);
> -
> -#ifdef CONFIG_SMP
> -	irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
> -#endif
> -
> -	return 0;
> -}
> -IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);
>