{standard input}:5973: Error: operand out of range (512 is not between -512 and 511)

[Sebastian Andrzej Siewior]

On 2020-08-24 10:17:19 [+0800], kernel test robot wrote:
> tree:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
> head:   d012a7190fc1fd72ed48911e77ca97ba4521bccd
> commit: de8f5e4f2dc1f032b46afda0a78cab5456974f89 lockdep: Introduce wait-type checks
> date:   5 months ago
> config: arc-randconfig-r004-20200824 (attached as .config)
> compiler: arc-elf-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         git checkout de8f5e4f2dc1f032b46afda0a78cab5456974f89
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp at intel.com>
> 
> All errors (new ones prefixed by >>):
> 
>    {standard input}: Assembler messages:
> >> {standard input}:5973: Error: operand out of range (512 is not between -512 and 511)
> 

I have here gcc 10 and the output is:
|  CC      arch/arc/kernel/signal.o
|arch/arc/include/asm/bitops.h: Assembler messages:
|arch/arc/include/asm/bitops.h:236: Error: junk at end of line, first unrecognized character is `0'
|arch/arc/include/asm/bitops.h:236: Error: junk at end of line, first unrecognized character is `0'
|make[3]: *** [scripts/Makefile.build:283: arch/arc/kernel/signal.o] Error 1
|make[2]: *** [scripts/Makefile.build:500: arch/arc/kernel] Error 2
|make[1]: *** [Makefile:1788: arch/arc] Error 2

the reason is that:
| #ifndef CONFIG_ARC_PLAT_EZNPS
| BIT_OPS(set, |, bset)
| BIT_OPS(clear, & ~, bclr)
| BIT_OPS(change, ^, bxor)
| #else
| BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
| BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
| BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
| #endif

and the config supplied does not accept CTOP_INST_AAND_DI_R2_R2_R3
(which is
	#define CTOP_INST_AAND_DI_R2_R2_R3              0x4A664C04
)
and the assembler does not like that.
After the removal CONFIG_ARC_PLAT_EZNPS I got to stage 2:
|drivers/irqchip/irq-eznps.c:80:16: error: 'CTOP_AUX_IACK' undeclared (first use in this function)
|   80 |  write_aux_reg(CTOP_AUX_IACK, 1 << irq);

so I removed CONFIG_EZNPS_GIC. And then I ended with:
|  LD      vmlinux.o
|arc-linux-ld: gcc-10.1.0-nolibc/arc-linux/bin/../lib/gcc/arc-linux/10.1.0/arc700/libgcc.a(_muldi3.o): compiled for a little endian system and target is big endian
|arc-linux-ld: failed to merge target specific data of file gcc-10.1.0-nolibc/arc-linux/bin/../lib/gcc/arc-linux/10.1.0/arc700/libgcc.a(_muldi3.o)

Please update CI and ARC.

Sebastian